1. Unlock the latch.
2. Open the I/O compartment cover.
3. Take the microSD card from its
packaging.
4. Insert the microSD card into the slot,
making sure the beveled edge is
aligned in the slot.
5. Press in until an audible click sounds.
MicroSD Card
SIM Card
1. Unlock the latch.
2. Open the I/O compartment cover.
3. Take the SIM card from its
packaging.
4. Insert the SIM card into the slot,
making sure the beveled edge is
aligned in the slot.
5. Press in until an audible click sounds.
Power On
1. Open the I/O compartment cover.
2. Switch the DIP switch to the ON
position.
3. Press and hold the power button until
the screen lights. The device runs
through the start up sequence and
powers up.
Charging
1. Flip open the DC-IN cover to expose
the DC-IN jack.
2. Connect the AC adapter to the
DC-IN port.
3. After charging, disconnect the AC
adapter.
4. Replace the DC-IN cover by angling
the rear side at an angle.
5. Press the front open end down in the
compartment to seal in place.