Koukaam NETIO-230C User manual

Quick installati n guide
Thank you for purchasing the KOUKAAM product. Before usage, please, carefully read this Quick Installation Guide
and Operating Instructions you can find on the CD which is included in the pack. You thus avoid incorrect installation
or incorrect usage of the equipment.
Carefully read the following warning.
Imp rtant n tice
1. The equipment that you have purchased operates under a certain voltage. Incorrect manipulation with the equipment
may result in damage to the equipment or injury to the person handling it.
2. The manufacturer is not liable for potential damage caused by incorrect usage or location of the equipment
in an unsuitable environment.
3. The equipment is not for outdoor usage.
4. Do not use the equipment in an environment with strong vibrations.
5. Unauthorised modification of this equipment can damage it or cause fire.
6. Prevent contact with fluids; do not expose the equipment to high temperatures.
7. Protect the equipment from falling.
8. Only equipment approved for use in electricity network may be connected.
9. If the equipment malfunctions, disconnect it from the electric power supply and contact your vendor.
Package c ntents
1. ETIO-230C/CS
2. etwork patchcord
3. Power cable
4. Extension cable
5. Installation CD
6. Quick Installation Guide
Fr nt view
1. LED diodes
2. Buttons
3. Serial port
4. RJ45-Socket / Ethernet
5. Serial tunnel
( ETIO 230CS model only)
Back view
1. Main power switch
2. Power inlet
3. Fuse holder
4. Output sockets
1
1 2 3 4
2
3 45

C nnecti n
• Connect your ETIO-230C/CS to the computer network (switch, router) using the supplied Ethernet cable
with RJ-45 connectors.
• Connect devices that you want to control to outputs (power outlets).
• Connect the ETIO cable plug to the power outlet. Turn the main power switch to O position (See Back view picture).
Netw rk Search
• Default IP address is 192.168.10.100. If there is DHCP server in your network, ETIO will acquire IP address
automatically.
• For network search and set up of IP address, as the case may be, use the NetioDiscover utility, which is on the supplied
CD. Use the Discover button to search for ETIO devices connected in your network. Use the Device setup button
to change the network parameters of the device selected from the list. By double clicking on the specific device
in the list, you can directly open its web page in your web browser.
First L gin
• Input the IP device address that the device obtained from the DHCP server via the etioDiscover utility into the web
browser.
• Enter the user name and password on the login page. Default user name is admin and password admin. You can
later change the password and username in the equipment configuration utility.
• You have just logged in the web interface. The user manual is on the supplied CD.
e believe that you will be satisfied with our product. In case of any questions or comments relating to the functionality
of the NETIO product, please do not hesitate to contact us.
The KOUKAAM Team
www.koukaam.se
The manufacturer bears no responsibility for any technical or printing errors and reserves the right to make any changes
in the product and in this user manual without prior notice. Any such changes shall be announced via the manufacturer's
website www.koukaam.se.
The manufacturer does not provide warranties of any kind whatsoever with regard to any information given in this user
manual or any derived warranties regarding product saleability or its fitness for a specific use.
In particular, the manufacturer does not provide any warranties for defects caused by incorrect use of the product,
failure to abide by the instructions and recommendations given in the user manual and in the Quick installation guide
and for any defects caused by unprofessional activities of third parties outside the manufacturer's authorized service shop.
KOUKAAM a.s.
Kaplanova 2252/8
Prague 4, 148 00
Czech Republic
www.koukaam.se
© 2011 KOUKAAM a.s. All rights reserved.
www.koukaam.se