Kovert SEE936 User manual
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
NOTE: The SEE936 has no PIR functionality
Mounting the Camera
Powering the Camera
The SEE936 draws 12V DC 263mA peak current when first switched on and IRs are on, dropping
down to 233mA. In order to cater for this additional headroom plus audio, it is recommended to use a
12vDC 350mA regulated power supply minimum, to maintain a normal power supply lifetime. The
camera is provided with a fly lead with a mini power 2.1mm DC socket. The camera is polarity
sensitive so connections must be correctly made.
SEE936 Internal 1080P Covert PIR Camera with IRs and Audio
The PIR camera is mounted on an adjustable camera bracket and the camera lens
looks through a small hole in the PIR. 22x True Black 940nM IR LEDs provide
discrete IR illumination and a miniature microphone provides audio.
Main Features:
Multiple HD 1080P formats TVI, AHD and
CVI plus CVBS (Analogue) 700TVL
22 x True Black 940nM IRs for covert use
3.7mm MegaPixel pinhole lens
IR cut filter for realistic colour reproduction
Miniature microphone for audio capture
Sens-Up (NiteDevil) feature for low light levels
Privacy masking & Motion Detection displays
WDR (Wide Dynamic Range) facility
Coaxitron facility for UTC menu control
Full OSD menu
The camera is supplied with an adjustable bracket and
screws. Screw the bracket to the wall and slot the
back of the camera onto the adjuster. The adjuster has
a ball joint enabling the camera to be set to the
required position.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
Connecting the camera to control equipment
The PIR camera comes with a fly lead containing a joystick controller for menu access, a power
lead with 2.1 jack connector, a video lead for TVI/CVI/AHD and CVBS video formats with black
BNC connector and an audio lead with a white BNC connector. The CVBS mode is the standard
analogue connection and the others, versions of HD. Connect the HD camera to control equipment
via a female BNC-BNC lead. When using a co-ax type cable such as RG59 or similar, the outer
braid of the co-ax provides the “0V GROUND” connection and the inner core provides the “Video”
connection. The (CVBS) option is primarily available for use with older analogue equipment or for
setup using an analogue monitor.
When you are in correct format, press the joystick
button in, momentarily, if you wish to access the menu.
Audio
There is a miniature microphone included in the SEE936 which is powered internally. Audio is
constantly on but if used, the audio lead, needs connecting to an audio amplifier and speaker. This
can be the audio input on a monitor or PC. If connecting to one of the Alien/Mega DVR range or
the Zip NVR range, then audio settings will need to be made in these units, and an audio output
taken to an audio amplifier and speaker as already specified.
OSD Menu
The SEE936 has an on screen display menu. This can be accessed using the joystick on the camera.
Note: The menu system used in this camera is generic and therefore may have features that
the PIR camera does not support. This is not a fault.
These cameras can be viewed in TVI, AHD, CVI or CVBS modes. To select a
mode first power the camera up when it is connected to a monitor or DVR and
monitor, and see if the required format displays a colour picture. If not or in
black and white, move the joystick button down for 5 seconds to select TVI
mode, left for CVBS (analogue) mode, right for AHD and up for CVI.
(Note that picture may be in b/w in low light levels
or the cellophane lens cover has not been removed).
TVI
Press the centre button IN (see arrow) to enter the menu and use Left, Right, Up and Down to
move through and amend menu settings.
Alternatively use the TVI DVR PTZ menu as detailed in “Menu Access via DVR” below.
Press IN
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
Menu Access via TVI DVR using Coaxitron
Access to the camera menu is via the menu buttons on the camera or via the Up the Co-ax
connection. Access by the menu buttons is described below. To use the Up The Coax connection,
this can be accessed using the PTZ menu in the MEGA TVI or MAX TVI DVRs using the
AlienTVI(Coaxitron) protocol. This protocol is generally set in the PTZ Settings menu as default
but if not, select using the following:
Enter the DVR Menu, click on Video, PTZ and select the channel number of the TVI camera
connected to the DVR. Then click on PTZ Settings and select AlienTVI(Coaxitron) and click
OK.
Use the directional arrows to move up and down or left or right to select options.
Now click on the PTZ button at the bottom of the screen and a full screen picture will be
displayed with the PTZ control menu. Click on the IRIS+ button to display menu
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
OSD Menu
The following menu display is shown:
MAIN MENU
1. LENS MANUAL
2. EXPOSURE
3. BACKLIGHT OFF
4. WHITE BAL ATW
5. DAY & NIGHT EXT
6. NR
7. SPECIAL
8. ADJUST
9. EXIT SAVE & END
LENS
MANUAL
DC
Leave setting on Manual as fixed board lens fitted
N/A
EXPOSURE
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
RETURN
AUTO-
1/25,1/50,FLK,1/200,1/400,1/1000,1/2000,1/5000,
1/10000,1/50000, x2/x4/x6/x8/x10/x15/x20/x25/x30
0 ~ 15
OFF –AUTO
x2,x4,x6,x8,x10,x15,x20,x25,x30
1 ~ 100
ON
LEVEL 0 ~ 8
RETURN
OFF –AUTO
POS / SIZE
GRADATION 0 ~ 2
DEFAULT
RETURN
BACKLIGHT
OFF
BLC
LEVEL Middle / High / Low
AREA
POS / SIZE
DEFAULT
RETURN
HSBLC
SELECT Area 1 ~ 4
DISPLAY ON Pos / Size
BLACK MASK ON / OFF
LEVEL 0 ~ 100
MODE NIGHT
AGC LEVEL 0 ~ 255
ALL DAY
DEFAULT
RETURN
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
WHITE BAL
DAY&NIGHT
ATW
AWC SET
INDOOR
OUTDOOR
MANUAL
AWB
EXT
AUTO
COLOR
B&W
MANUAL WB
BLUE 0 ~ 100
RED 0 ~ 100
RET
D & N EXT
DN ( DELAY ) 0 ~ 60 Default 3
N D ( DELAY ) 0 ~ 60 Default 3
RETURN
D & N AUTO
D N ( AGC ) 1 ~ 255 Default 200
D N ( DELAY ) 0 ~ 60 Default 1
N D ( AGC ) 1 ~ 255 Default 80
N D ( DELAY ) 0 ~ 60 Default 1
RET
B / W
BURST OFF / ON
IR SMART ON
Level 0 ~ 15 Default 3
Area
Pos / Size Ret
RETURN RET
NOISE
REDUCTION
NR
N R
2 D N R Middle / High / Off / Low
3 D N R Middle / High / Off / Low
RET
SPECIAL
CAM TITLE OFF / ON
D-EFFECT
MOTION OFF / ON
CAM TITLE
< > CLR POS END
D –EFFECT
FREEZE OFF / ON (Mirror option suppressed)
MIRROR OFF / MIRROR / V-FLIP / ROTATE
NEG. IMAGE OFF / ON
RET
MOTION
SELECT AREA 1 ~ 4
DISPLAY ON
SENSITIVITY 0 ~100
COLOR GREEN / BLUE / WHITE / RED
TRANS 1.00 / 0.75 / 0.25 / 0.00
ALARM
VIEW TYPE OFF / BLOCK / OUTLINE / ALL
OSD VIEW ON / OFF
ALARM OUT ON / OFF
TIME 0 ~ 15
RET
DEFAULT
RET
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
SPECIAL
CONTINUED
PRIVACY OFF / ON
LANGUAGE
DEFECT
RS485
RETURN RET
PRIVACY
SELECT AREA 1 ~ 4
DISPLAY OFF / MOSAIC / INV / COLOR
POSITION / SIZE / AGAIN
COLOR WHITE / BLACK / RED / BLUE / YELLOW
GREEN / CYAN / USER
TRANS 1.00 / 0.25 / 0.50 / 0.75
DEFAULT
RET
ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL
RUS / POR / NED / TUR
DEFECT
LIVE DPC ON / OFF
AGC LEVEL 0 ~ 255
LEVEL 0 ~ 100
RET
WHITE DPC OFF / ON
POS / SIZE RET
START
(Close Iris then enter)
DPC VIEW OFF / ON
LEVEL 1 ~ 100
AGC 0 ~ 14
SENS-UP x2/x4/x6/x8/x10/x15/x20
x25/x30
RET
BLACK DPC OFF / ON
POS / SIZE RET
START
(Close Iris then enter)
DPC VIEW OFF / ON
LEVEL 1 ~ 100
RET
RET
RS485 N/A
CAM ID 0 ~ 255
ID DISPLAY OFF / ON
(Use arrows to move display)
BAUDRATE 2400 / 4800 / 9600 /19200 / 38400
RET
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
ADJUST
SHARPNESS
MONITOR
LSC ON / OFF
VIDEO OUT
RETURN RET
OFF / AUTO
LEVEL 0 ~ 10
START AGC 0 ~ 255
END AGC 0 ~ 255
RET
LCD
LCD
GAMMA USER / 0.45 / 0.50 / 0.55 / 0.60
0.65 / 0.70 / 0.75 / 0.80 / 0.85
0.90 / 0.95 / 1.00
BLUE GAIN 0 ~ 100
RED GAIN 0 ~ 100
RET
CRT
CRT
BLUE GAIN 0 ~ 100
RED GAIN 0 ~ 100
RET
PAL / NTSC
EXIT
Use right arrow to
select “Save & End”,
“Reset” or
“Not Save”
SAVE & END
RESET
NOT SAVE
Exit saving menu changes
Reset camera menu default settings
Exit menu without saving changes
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
Menu Description
The following menu description gives more in depth information about the menu options. In some
instances recommendations are made to hopefully enhance the results. However every installation
will be different and there will occasions when alternative solutions may be more suitable.
LENS
MANUAL
DC
Leave setting on Manual as fixed board lens fitted
N/A
EXPOSURE
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
RETURN
AUTO-
1/25,1/50,FLK,1/200,1/400,1/1000,1/2000,1/5000,
1/10000,1/50000, x2/x4/x6/x8/x10/x15/x20/x25/x30
0 ~ 15
OFF –AUTO
x2,x4,x6,x8,x10,x15,x20,x25,x30
1 ~ 100
ON
LEVEL 0 ~ 8
RETURN
OFF –AUTO
POS / SIZE
GRADATION 0 ~ 2
DEFAULT
RETURN
SHUTTER Auto / Manual
AUTO-1/25,1/50,FLK,1/200,1/400,1/1000,1/2000,1/5000,
1/10000,1/50000, x2/x4/x6/x8/x10/x15/x20/x25/x30
Shutter speed changes allow you to freeze moving objects without ghosting but reduce the amount
of available light the faster the shutter operates. At night the slower the shutter speed the more light
is available. The Flicker option sets the shutter speed at 1/250 that synchronises with fluorescent
tubes so that the pulsing effect is minimised.
Recommendation is to leave this in Auto.
AGC 1 ~ 15 (Default = 15)
For better performance in low light conditions the AGC (Automatic Gain Control) can be increased.
This has the effect of making the picture brighter but it may also add more noise as it amplifies all
aspects of the video signal.
Recommend AGC is decreased below 15 if Sensup is increased over x2.
SENS-UP OFF –AUTO - x2,x4,x6,x8,x10,x15,x20,x25,x30
The Sens-Up option allows the shutter speed to be reduced allowing additional light to be captured.
Increasing brightness helps night time viewing (see BRIGHTNESS setting above). If set too high
and Sensup is slowing shutter speed down to a lower speed than any movement speed, ghosting can
occur. Recommend that Sensup is switched on to x8 or above in low light conditions.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
BRIGHTNESS 1 ~ 100 (Default = 54)
Use this setting to increase brightness by opening camera iris. Useful for improving night time
viewing by using in conjunction with the Sens-Up option. However be aware to consider possible
effects when there is strong sunlight in summer that if setting brightness to high it may cause the
picture to white out.
Recommendation is to set brightness to 75.
D-WDR (Digital Wide Dynamic Range) LEVEL 0 ~ 8 (Default = 2)
WDR is used for surveillance applications where there is a large difference in foreground and
background light levels. This is typical in homes and office buildings that have large areas of glass
with direct sunlight outside. Without the option switched on, views by cameras looking through
windows may not give good reproduction outside. Also where there are areas of shadow and bright
sunlight, the WDR option helps to balance light levels.
Recommend using WDR where balancing light levels in warehouses or large buildings is
difficult.
DEFOG OFF –AUTO
The defog option can be used to improve the captured image in poor weather conditions such as
smog, fog or smoke. Three levels of optimisation can be applied using the gradation, 0 = low, 1 =
middle or 2 = high. This option is also useful to stabilise rapid fluctuating light levels. You need to
set the position and size of the area. By default the whole screen is covered but if just an area is
required, use the size option first to create a box and then use the position to position it using the
controller arrow keys. Use default to default this option.
Recommend setting this option to On
RETURN
Return to main menu.
BACKLIGHT
OFF
BLC
LEVEL Middle / High / Low
AREA
POS / SIZE
DEFAULT
RETURN
HSBLC
SELECT Area 1 ~ 4
DISPLAY ON Pos / Size
BLACK MASK ON / OFF
LEVEL 0 ~ 100
MODE NIGHT
AGC LEVEL 0 ~ 255
ALL DAY
DEFAULT
RETURN
Backlight Compensation when set, can balance light levels during day and night so that light hitting
objects viewed, is evenly spread across the picture. There are two options BLC and HSBLC that
can be selected.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
Backlight BLC
(Backlight Compensation)
BLC is the standard setting for adjusting light level differences. The level settings provides an
option for selecting low, middle or high. Select an area where BLC is required. Using the Position
and Size settings selecting boxes where light balancing is required. Work from top to bottom and
from left to right. Clicking on Default will default this menu option only.
HSBLC
(High Sensitivity Backlight Compensation)
HSBLC is high level backlight compensation that will darken a bright area e.g car headlights. This
can be set for all day or night only. The lower the level the more compensation is applied. Note that
using the night option may be best as daytime pictures generally give a more even spread of light
apart from sunlight issues.
Recommend only to use on Night Only if bright lights are causing complete video loss.
Return
Return to main menu
WHITE BAL
ATW
AWC SET
INDOOR
OUTDOOR
MANUAL
AWB
MANUAL WB
BLUE 0 ~ 100 Default 50
RED 0 ~ 100 Default 50
RET
The White Balance feature automatically adjusts the colour settings in the camera to match the type
of light available, so that white and other colours appear as natural as possible.
ATW
This option is generally used to set white balance when camera is used externally.
AWC SET
Press IRIS+ or joystick centre button down
This option allows you to set white balance using current light levels. Settings will only change
when you press IRIS+ or joystick centre button down.
INDOOR
This option is generally used to set white balance when camera is used internally.
OUTDOOR
This option is generally used to set white balance when camera is used externally.
MANUAL WB
This option allows you to set white balance using manual settings.
AWB
Auto White Balance is best suited for indoor camera use where light level changes are rare.
Recommend using AWB rather than ATW.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
DAY&NIGHT
EXT
AUTO
COLOR
B&W
D & N EXT
D N ( DELAY ) 0 ~ 60 Default 3
N D ( DELAY ) 0 ~ 60 Default 3
RETURN
D & N AUTO
D N ( AGC ) 1 ~ 255 Default 200
D N ( DELAY ) 0 ~ 60 Default 1
N D ( AGC ) 1 ~ 255 Default 80
N D ( DELAY ) 0 ~ 60 Default 1
RET
B / W
BURST OFF / ON
IR SMART ON
Level 0 ~ 15 Default 3
Area
Pos / Size Ret
RETURN RET
The Day & Night menu, controls light settings, and predominantly provides options for using the
cameras’ Infra-Red facilities. There are four sub-options External, Auto, Colour and B/W.
EXTERNAL
This option does not use the internal CDS sensor to measure the available light. With cameras using
their own IR light source, this option can give the best results. Note that this option has an
adjustment for setting a delay factor from day to night and from night to day to provide more
appropriate settings for respective locations.
Recommend to use this option if there is additional lighting available at night
AUTO
The standard Auto function uses the internal CDS to measure available light. This option uses AGC
(Automatic Gain Control) and the delay time to adjust picture quality when switching from day to
night and from night to day.
Recommend to use this option when the only lighting available is provided by the camera.
COLOUR
This option will remain in colour mode day and night. There are no sub menu settings. This will
only be applicable when light levels at night are above 4 lux.
B&W
When this option is selected the camera will remain in black and white mode, day and night.
The only sub menus available are Burst and IR Smart. When burst is switched on it adds the colour
burst info from the camera. If the IR Smart option is switched on you can select an area size and
position so that the intensity of the camera’s infrared LEDs compensate for the distance of an object
so that the infrared does not overexpose the object. This is useful to solve the problem of infrared
LEDs whiting out images, such as people’s faces, when they are too close to the IR LEDs.
Return
Return to main menu.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
DIGITAL NOISE
REDUCTION
NR
N R
2 D N R Middle / High / Off / Low
3 D N R Middle / High / Off / Low
RET
DNR Off / Low / Middle / High
Digital Noise Reduction is generally applied when the Sens-Up feature is used to improve night
time views in low light conditions. Using the Sens-Up option slows the shutter speed but this
increases noise and causes grainy picture effects. DNR helps to minimise this effect. The options
low, middle and high, apply different levels of noise reduction and therefore have to be tested to
gain the best result as light levels will be different at every site and location.
2DNR
The 2DNR option which is two dimensional digital noise reduction analyses single frames
individually to find pixels that are likely to represent noise and benefits are predominantly obtained
on moving objects.
3DNR
The 3DNR option which is three dimensional digital noise reduction analyses previous and current
frames to identify pixels that are likely to represent noise and benefits are predominantly obtained
on static objects.
Therefore setting both options in this camera should provide the best result.
Recommend to leave these options both set to middle when Sense-Up is on.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
SPECIAL
CAM TITLE OFF / ON
D-EFFECT
MOTION OFF / ON
CAM TITLE
< > CLR POS END
D –EFFECT
FREEZE OFF / ON (Mirror option suppressed)
MIRROR OFF / MIRROR / V-FLIP / ROTATE
NEG. IMAGE OFF / ON
RET
MOTION
SELECT AREA 1 ~ 4
DISPLAY ON
SENSITIVITY 0 ~100
COLOR GREEN / BLUE / WHITE / RED
TRANS 1.00 / 0.75 / 0.25 / 0.00
ALARM
VIEW TYPE OFF / BLOCK / OUTLINE / ALL
OSD VIEW ON / OFF
ALARM OUT ON / OFF
TIME 0 ~ 15
RET
DEFAULT
RET
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
SPECIAL
CONTINUED
PRIVACY OFF / ON
LANGUAGE
DEFECT
RS485
RETURN RET
PRIVACY
SELECT AREA 1 ~ 4
DISPLAY OFF / MOSAIC / INV / COLOR
POSITION / SIZE / AGAIN
COLOR WHITE / BLACK / RED / BLUE / YELLOW
GREEN / CYAN / USER
TRANS 1.00 / 0.25 / 0.50 / 0.75
DEFAULT
RET
ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL
RUS / POR / NED / TUR
DEFECT
LIVE DPC ON / OFF
AGC LEVEL 0 ~ 255
LEVEL 0 ~ 100
RET
WHITE DPC OFF / ON
POS / SIZE RET
START
(Close Iris then enter)
DPC VIEW OFF / ON
LEVEL 1 ~ 100
AGC 0 ~ 14
SENS-UP x2/x4/x6/x8/x10/x15/x20
x25/x30
RET
BLACK DPC OFF / ON
POS / SIZE RET
START
(Close Iris then enter)
DPC VIEW OFF / ON
LEVEL 1 ~ 100
RET
RET
RS485 N/A
CAM ID 0 ~ 255
ID DISPLAY OFF / ON
(Use arrows to move display)
BAUDRATE 2400 / 4800 / 9600 /19200 / 38400
RET
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
CAM TITLE ON / OFF
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M NO P Q R S TUV
WX Y Z > ( )
= & : ~ , .
CLR POS END
_ _ _ _ _ _ _ _ _ _ _ _ _ _
Use the camera joystick or coaxitron PTZ control option in DVR to enter up to a 15 character
camera name. Use the arrow keys on the joystick/PTZ control to move to character required and
press the joystick button in or the IRIS+ button using the PTZ control, to select the character
required. To move to the correct character position, use the arrow keys to move to the left or right
arrow on the line above the camera title and press joystick button in or IRIS+ button using the PTZ
control. The same procedure can be used to clear (CLR) the title, position (POS) the title on the
camera display screen and set the option using the (END) option.
D-EFFECT OFF / ON
The digital Effect menu provides an option to freeze the picture but does not allow the Mirror
option to be selected once picture is frozen.
FREEZE OFF / ON (Mirror option suppressed)
Freezes camera picture.
MIRROR OFF / MIRROR / V-FLIP / ROTATE
Change picture for mirror effect, vertical flip or rotate.
NEG. IMAGE OFF / ON
Changes to negative picture.
MOTION OFF / ON
This camera has a motion detection option that will display MOTION DETECTED whenever the
camera detects movement within a specified area. Up to four separate areas can be created using the
position and size parameters in four coloured boxes. These boxes can be individually set to display
smaller coloured squares that will track movement. This does not replace the motion detection
option in the DVR.
SELECT AREA1 / AREA2 / AREA3 / AREA4
Select an area.
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
DISPLAY ON / OFF
Select ON to set position and size of Area selected. Recommend setting size first then position. You
use the arrow keys on controller and press enter to accept, or IRIS+ button if using DVR PTZ
control. Press RET to return to menu or AGAIN to re-enter the position and size settings.
SENSITIVITY 0 ~ 100 (Default = 64)
This sets the sensitivity of the motion detection. The higher the value the more sensitive it is.
COLOUR GREEN / BLUE / WHITE / RED
Use this option to select the colour of the box.
TRANS 1.00 / 0.75 / 0.25 / 0.00
This option sets transparency level of coloured box.
ALARM
This option applies the view parameters when motion is triggered applying all, blocking or outline
facility.
VIEW TYPE ALL / OFF / BLOCK / OUTLINE
OSD VIEW ON / OFF (switches off on screen display)
ALARM OUT ON / OFF (switches off alarm)
TIME 0 ~ 15 (Default = 3) (Alarm display time in seconds)
RET
PRIVACY OFF / ON
The privacy option allows you to overlay up to four areas of the picture to mask video that may be
classified as intrusive or obtrusive. Up to four different coloured boxes can be created and used to
mask the picture.
SELECT AREA1 / AREA2 / AREA3 / AREA4
DISPLAY COLOR
Set position and size of Area selected. Recommend setting size first then
position. You use the arrow keys on controller and press enter to accept, or
IRIS+ button if using DVR PTZ control. Press RET to return to menu or
AGAIN to re-enter the position and size settings.
COLOR WHITE / BLACK / RED / BLUE / YELLOW
Set area colour GREEN / CYAN / USER
TRANS 1.00 / 0.25 / 0.50 / 0.75
Sets transparency level of coloured box.
DEFAULT
Defaults this menu
RETURN RET
Return to previous menu
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
LANGUAGE ENG CHN1 CHN2 GER FRA ITA SPA POL
RUS POR NED TUR
Select the language and press enter on controller to accept, or the IRIS+ button if using DVR PTZ
control, to change the menu into the correct language.
Languages are: English, Chinese 1, Chinese 2, German, French, Italian, Spanish, Polish, Russian,
Portuguese, Dutch and Turkish.
DEFECT
DPC is Dead Pixel Count. Lenses can use millions of pixels. A 2 MPX lens has 2,000,000 pixels.
Often some of these pixels can fail and can display either white or black spots on the video display.
This option suppresses dead pixels.
LIVE DPC ON / OFF
AGC LEVEL 0 ~ 255 Default = 64
LEVEL 0 ~ 100
RETURN RET
WHITE DPC ON / OFF
POS / SIZE
START
DPC VIEW OFF / ON
LEVEL 0 ~ 100 (Default = 15)
AGC 0 ~ 14 (Default = 14)
SENS-UP x2 / x4 / x6 / x8 / x10 / x15 / x20 / x25
x30 (Default = x8)
RETURN RET
BLACK DPC OFF / ON
POS / SIZE
START
DPC VIEW OFF / ON
LEVEL 0 ~ 100
RETURN RET
RS485
There is no RS485 cable connection on this camera. Menu access is via TVI coaxitron and the
menu controller attached to the camera.
RETURN RET
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
ADJUST
SHARPNESS
MONITOR
LSC
VIDEO OUT
RETURN RET
AUTO / OFF
LEVEL 0 ~ 10
START AGC 0 ~ 255
END AGC 0 ~ 255
RET
LCD
LCD
GAMMA USER / 0.45 / 0.50 / 0.55 / 0.60
0.65 / 0.70 / 0.75 / 0.80 / 0.85
0.90 / 0.95 / 1.00
BLUE GAIN 0 ~ 100
RED GAIN 0 ~ 100
RET
CRT
CRT
BLUE GAIN 0 ~ 100
RED GAIN 0 ~ 100
RET
ON / OFF
PAL / NTSC
SHARPNESS AUTO / OFF
This option adjusts the sharpness of the picture.
Recommend to set so no black outline around objects is displayed.
LEVEL 0 ~ 10 (Default = 7)
START AGC 0 ~ 255 (Default = 120)
END AGC 0 ~ 255 (Default = 255)
RETURN RET
MONITOR LCD / CRT
Use this menu to set the colour of an LCD or CRT monitor.
LCD
GAMMA USER / 0.45 / 0.50 / 0.55 / 0.60
0.65 / 0.70 / 0.75 / 0.80 / 0.85
0.90 / 0.95 / 1.00
BLUE GAIN 0 ~ 100 (Default = 70)
RED GAIN 0 ~ 100 (Default = 70)
RETURN RET
CRT
BLUE GAIN 0 ~ 100 (Default = 50)
RED GAIN 0 ~ 100 (Default = 50)
RETURN RET
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
LSC (Lens Shading Compensation) ON / OFF
Lens shading compensation describes the light fall-off observed, towards the edges of an image.
Lens vignetting can be prevalent when light hits irregular angles such as railings.
VIDEO . OUT PAL / NTSC
PAL is the standard used in the UK.
RETURN RET
EXIT
Use right arrow to
select “Save & End”,
“Reset” or
“Not Save”
SAVE & END
RESET
NOT SAVE
Exit saving menu changes
Reset camera menu default settings
Exit menu without saving changes
EXIT SAVE & END Exit saving menu changes
RESET Reset camera menu default settings
NOT SAVE Exit menu without saving changes
HD-TVI XSEE936
SEE936 Full HD Covert PIR Camera (TVI/AHD/CVI/CVBS)
with IRs and Audio
SEE936 Camera Specifications
Image Sensor
1.28 ” CMOS
Video Outputs
HD TVI / AHD / CVI
Resolution
1080p
Analogue TVL
CVBS 700 TVL
Day/Night
True Day/Night mechanical filter
IR Power
22 x True Black 940nM IR LEDs
Min.Illumination
0 Lux IRs on / 0.01 Lux IRs Off
Power/Current
12v DC 263mA IRs on
Watts
3.2W
Power Supply
Recommended > 350mA regulated
Power Connector
2.1mm DC Jack
Lens
3.7 mm pinhole lens
Menu
Full OSD Menu via coaxitron
Viewing Angle
Viewing angle 72°
D-WDR
Wide Dynamic Range Off / 0 ~ 8
Backlight
BLC and HSBLC included
Dead Pixel Count
DPC black & white
Dimensions
66 (W) x 45 (D)x 113mm (H)
Colour
White
Build
Plastic Outer / bracket & screws
NiteDevil
Sens-Up option
IP Rating
N/A Indoor camera
Privacy Masking
Privacy Masking 4 areas
Mirror Option
Mirror / Flip / Rotate options
Motion Display
Motion display option included
Defog Option
Defog option included
Freeze option
Freeze option included
Audio
Internal microphone
All specifications are approximate. Kovert.com reserves the right to change any
product specification or features without notice. Whilst every effort is made to
ensure that these instructions are complete and accurate, kovert.com cannot be
held responsible in any way for any losses, no matter how they arise, from
errors or omissions in these instructions, or the performance or non-
performance of the camera or other equipment that these instructions refer to.
Table of contents
