KRAM telecom FIX2CAR User manual

'' CLICK ''
'' CLICK ''
(Type 1a) FIX2CAR®with loose cable (Type 1b) FIX2CAR®with hard-wired cable
(Type 2) FIX2CAR® with Flex-Arms (Type 3) FIX2CAR® Side-Charged
1. Assemblement
QUICK SETUP GUIDE
(Option 1) Mounted onto windshield with suction-cup
2. Installation in car
(Option 2) Mounted onto dashboard with 3M-pad
TURN
REMOVE
TURN
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
now you are ready to go
& we wish you safe driving!
FIX2CAR® is a registered trademark of KRAM TELECOM A/S. All Rights Reserved ©2012
Insert the phone into the holder, and
connect the charger to 12/24V DC
cigarette socket.
WWW.FIX2CAR.COM
®
( F08 )

PUSH
1/4 TURN
CAUTION
CLASH!!!
CAUTION
1
2Maintenance
There is a possibility that over the years of frequent usage the bracket will loosen a bit.
You can dismount holder from the “arm” as shown on the illustration bellow (A).
Then gently tighten 4 screws about quarter of a turn each (B).
A.
B.
Daily Use
Always remove your phone
from the holder carefully.
Try to avoid tilts over
90° angle.
1.
2.