Kramer PT-4iREX User manual

PT-4iREX Quick Start (P/N: 2900-300951QS REV 1)
P/N:
2900- 300951QS
Rev:
1
Scan for full manual
PT-4iREX Quick Start Guide
This guide helps you install and use your PT-4iREX for the first time.
Go to www.kramerav.com/downloads/PT-4iREX to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check what’s in the box
PT-4iREX IR Repeater
4 Rubber feet
1 IR emitter control cable
1 Power adapter (12V DC)
1 Bracket set
1 External remote IR receiver
1 Quick start guide
Step 2: Get to know your PT-4iREX
#
Feature
Function
1
OUT 3.5mm Mini Connector
Connect to the IR emitter cable (from 1 to 4).
2
12V DC
Connect to the power adapter and plug into the mains electricity.
3
EXT. 3.5mm Mini Connector
Connect to an external remote IR receiver unit for controlling the machine via an IR
remote controller (instead of using the front panel IR IN receiver).
4
IR IN Sensor
Receives signals from an IR control transmitter.
5
SIGNAL LED
Lights when an IR link is established.
6
ON LED
Lights when the unit is powered.
Step 3: Install PT-4iREX
Install PT-4iREX using one of the following methods:
Attach the rubber feet and place the unit on a flat surface.
Fasten a bracket (included) on each side of the unit and attach it to a flat surface.
For more information go to www.kramerav.com/downloads/PT-4iREX.
Mount the unit in a rack using an optional RK-4PT rack adapter.

Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your PT-4iREX. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to PT-4iREX.
Step 5: Connect the power
Connect the 12V DC power adapter to PT-4iREX and plug it into the mains electricity.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics power adapter that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See www.KramerAV.com for updated safety information.
Technical Specifications
Input:
1 IR receiver
Outputs:
4 IR emitters on 3.5mm mini connectors
IR Operating Frequency:
38kHz +/- 10%
Effective Off-axis Angle:
120°max.
Power Source:
12V DC, 95mA
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-40° to +70°C (-40° to 158°F)
Humidity:
10% to 90%, RHL non-condensing
Dimensions:
6.22cm x 5.24cm x 2.44cm (2.45" x 2.06" x 0.96") W, D, H
Weight:
0.15kg. (0.55lbs) approx.
Accessories:
Power supply,
3.5mm to IR emitter control cable
0.9m external remote IR receiver
Options:
15m and 20m IR emitter extension cables,
15m external IR receiver,
15m IR extension cable
Specifications are subject to change without notice at www.kramerav.com