Kramer Showmaster WL 60 User manual

WET / DRY VACUUM CLEANER
FOR HORSE GROOMING
Instruction manual
www.kramer.com.uk

2|PARTS
1 | Wet and dry vacuum cleaner
2 | Safety feature that ensures proper motor function
3 | Caddy frame provides space for accessories
1|PRODUCT FEATURES / TECHNICAL DATA
Plug
Electrical cord
Swiveling
Caster
Locking tab
Caddy frame
Hose
connection port
Tank Cover
Tank
Power Switch
Top Cover
Transportation Handle
Filter
Model Power Voltage Frequency
WL60 1200/1400 W 220 V-240 V 50 Hz

3|SAFETY INSTRUCTIONS
1 | Suitable for any 220 V socket. UK Plug adapter
included.
2 | Do not operate in dangerous areas. The motor
may emit sparks and cause fire.
3 | Do not allow the opening for the hose connec-
tionporttobecomeblocked,asthiscouldcausea
rise in temperature and thus damage.
4 | Do not suck up flammable and explosive objects
such as lit cigarettes, petrol, etc.
* | Avoid sharp objects. * | Do not suck up substances such as chalky
powder, plaster and graphite dust. The filter
could clog.

3|SAFETY INSTRUCTIONS
5 | To avoid water damage to the motor, do not let
the appliance tip over.
6 | Warning: If water leaks from the blower port,
do not turn the unit over to repair it. Water could
enter the motor and cause damage. Do not use
this appliance as a pump.
7 | Switch the appliance off and disconnect it from
the power mains after use or to carry out
repairs.
8 | To avoid damage to plastic parts, do not lea-
ve the appliance in direct sunlight or anywhere
where high temperatures are prevalent.
9 | Do not step on or pull on the hose. 10 | Do not immerse the tank lid in water or
wash it, as water on electrical parts can cause
harm to people. To clean, wipe with a slightly
damp cloth.

1 | Connect the plug to the mains.
2 | Press the switch to turn on.
4|BEFORE YOU START
„I“ Indicates switched on.
„O“ Indicates switched off.
Push the end of the hose connec-
tion into the hose connection
port on the side of the tank.
Always assemble the individual parts as shown in the illustrations.
Hose end
Hose connec-
tion port

1 | As soon as the tank is full of water, the safety feature is activated. At this moment, the suction force decrea-
ses and the appliance produces a sound to indicate that it is full. If this happens, switch off the power and
empty the tank of water. Then switch the appliance back on.
2 | Should the appliance tip over, the safety feature will start. Please switch off the power and set the appliance
upright again. Switch the appliance back on.
3 | If this safety feature is still in operation and the appliance is still in use, the appliance could overheat thus
resulting in damage such as fire. In this case turn off the appliance and empty the canister. The appliance
is once again ready for use.
5|SAFETY FEATURES
6|MAINTENANCE
1 | Cleaning the tank
* After using the appliance or when the tank is full, the power should be switched off and the tank emptied.
1 | Open the locking clips and remove the top cover.
2 | Pull out the filter bag and remove the dust.
3 | Re-insert the filter bag and attach the top cover.
2 | Cleaning the filter bag
When the filter bag is dirty, it should be washed with clean and warm water. If necessary, a light detergent can
be used.
1 | Remove filter
2 | Wash
3 | Allow to air dry thoroughly