kries IKI-LUG1500 User manual

IKI-Split-Core Transducer: IKI-LUG_1500 92
mm
IKI-LUG are directional transducers specially
designed for use with corresponding devices of
the IKI series. They are easy to mount and can
be quickly connected to the devices via suitable
connection cables.
Features
• plug-in connection cable for easy installation
• marking of load flow direction
• easy opening and closing due to pressure lock
• fixing to cable with cable tie
• insertable on C-cone bushings together with bushing sleeves
Versions
Item number Description
2512105_H001 IKI-LUG_1500 Split-Core Transducer with cable tie (set) | Ø 92mm
2512105_H003 IKI-LUG_1500 Split-Core Transducer for C-Cone-Bushings (set) | Ø 92mm
2512105_H004 IKI-LUG_1500 Split-Core Transducer for SIEMENS-Bushings (set) | Ø 92mm
Technical Data
Product information
Article number IKI-LUG1500
Product designation IKI-LUG_1500 Split-Core Transducer | Ø 92mm
Compatibility
Usable with IKI-22, IKI-23
Operation Conditions
Protection class IP54
Kries-Energietechnik GmbH & Co. KG
Sandwiesenstr. 19 | D-71334 Waiblingen
kries.com | [email protected] | [phone]
28.06.22
Page 1/3
© Kries-Energietechnik GmbH & Co. KG | Subject to modifications.

IKI-Split-Core Transducer: IKI-LUG_1500 92
mm
Characteristics
Applicable at nominal frequency 50 Hz, 60 Hz
Inner diameter 92 mm
Transmission ratio 1500 / 1
Load power 0.2 VA @ 600 A
Thermal maximum current 27 kA
Maximum continuous thermal current 650 A
Insulation voltage transformer 3 kV
Directional current sensing 
Installation location Screened cables, Bushing of SF6-Switchgear
Connecting Cables
Article number Product designation
3503118_S Connecting cable set | pluggable | Length = 3,0m
3503135_S Connecting cable set | pluggable | Length = 5,0m
Connecting cable set | pluggable | other lengths on request
Figures
Assembly instructions
Explanations to the figures:
Kries-Energietechnik GmbH & Co. KG
Sandwiesenstr. 19 | D-71334 Waiblingen
kries.com | [email protected] | [phone]
28.06.22
Page 2/3
© Kries-Energietechnik GmbH & Co. KG | Subject to modifications.

IKI-Split-Core Transducer: IKI-LUG_1500 92
mm
• (1) Cable
• (2) Cable tie
• (3) Tab to open CTs
• (4) Shield return
• (5) Connector socket for connecting cable
• (6) Divisible CTs core
Assembly:
• To open transducer core, press tab in marked direction with thumb (A) and pull core out
of housing (B). Fasten CTs to cable with cable tie, close transducer core until bead engages
tab.
• Orientation: "K (P1)" in direction of busbar, "L (P2)" in direction of cable
• Note shield return through current transformer.
Safety instructions:
• During installation, the five safety rules must be observed.
• The current transformers may only be placed on shielded, touch-proof cables!
• The current transformers must not be operated in open condition.
• Damaged current transformers must not be used.
• The cable shield must be fed back through the current transformers in an insulated
manner for proper function.
• Please refer to the operating instructions of the respective device for further details.
Other instructions
Product images may differ from the product.
Kries-Energietechnik GmbH & Co. KG
Sandwiesenstr. 19 | D-71334 Waiblingen
kries.com | [email protected] | [phone]
28.06.22
Page 3/3
© Kries-Energietechnik GmbH & Co. KG | Subject to modifications.