Krowne Royal 16-655 User manual

Single Hole Wall Mount Sensor
Faucet with Straight Spout, Built-In
Control Module Installation Manual
16-655
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
16-655 Installation Manual
A
N
O
T
Q
S
P
R
B
C
E
F
D
G
H
K
M
L
I
J
Letter Description
ATop cover
BPhilips screw
CSensor
DAerator
ESpout body
FInner hex screw
GFixed chassis
HThreaded nipple
IGasket
JFixation gasket
KFixation nut
LRubber O-Ring
MElbow 3/8”
N(4) AA batteries
OBattery case
PWater line
QMagnet
RFilter Adapter 1/2” to
1/2”
SHot & cold water lines
TMechanical mixing
valve

Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
16-655 Installation Manual
Installation Instructions
1. Ensure that water supply is turned off at the stops.
2. Remove faucet from packaging and inspect that all included components are present.
3. Using a Philips head screwdriver, remove the set screw (B) on the underside of the faucet body.
4. Remove the end cap (A) of the faucet to expose the battery compartment.
5. Carefully remove the battery case (O), and install the included (4) AA batteries (N) into the holder.
(Be careful to follow proper orientation).
6. Guide the faucet’s threaded nipple (H) through the backsplash or wall. Be sure to install the
gasket (I) between the faucet body (E) and the wall.
7. Secure the faucet to the backsplash or wall with the included washer (J) and locking nut (K).
Align the faucet so that it is level and tighten the lock nut.
8. Install the included 90 degree elbow (M) to the end of the threaded nipple (H) on the faucet.
9. Connect both the included water lines (S) to the hot and cold stops. Tighten.
10. Connect the hot and cold water lines (S) to the inlets of the included mechanical mixing valve (T).
11. Install the included in-line debris lter (R) to the single outlet of the mechanical mixing valve (T).
12. Connect the outlet water line (P) from the debris lter (R) to the installed 90 degree elbow (M).
13. Set mechanical mixing valve adjustment tab in centered position (this can be adjusted
for temperature).
14. Turn hot and cold water stops on and verify that no leaks are present.
15. Wave hand or object in front of sensor (C) to ensure operation.
E I JH K ML

16-655 Installation Manual
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
100 Haul Rd. • Wayne, NJ 07470
krowne.com
This Standard Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Krowne Metal Corpora-
tion (hereinafter “Krowne”) with respect to the product purchased by Purchaser (the “Equipment). By accepting delivery of the
Equipment, Purchaser agrees to be bound by and accept these terms and conditions. All dened terms within the Warranty shall
have the same meaning and denition as provided elsewhere in the Warranty. Equipment covered by the Warranty shall only be
warranted in connection with its original installation only. Krowne will only be obligated to honor the warranty set forth in these
terms and conditions upon receipt of full payment for the equipment.
Please visit krowne.com/warranty for full terms and conditions regarding
the warranty on your new Royal Series product.
Warranty
krowne.com/faucetflex
Effortlessly configure a faucet,
pre-rinse and much more
Instant spec sheet generation
Instant price generation
Product Description Warranty Period
Royal Series Plumbing 1 Year