Kurzweil m230 User manual

Kurzweil International Contacts
-
tive.
US Customers:
Young Chang North America
Kurzweil Home Products
6000 Phyllis Drive
Cypress, CA 90630
Tel: [phone]
Fax: [phone]
Customers outside the US:
Young Chang Co., LTD.
9th Floor, Bldg 102, I-Park
Jeongja-Dong, Bundang-Gu, Seongnam-Si
Gyeonggi-Do 463-859
South Korea
Tel: [phone]
www.ycpiano.co.kr
www.youngchang.com
www.kurzweil.com
[email protected]
www.facebook.com/kurzweilmusicsystems/
www.twitter.com/KurzweilMusic
www.youtube.com/user/KurzweilTutorials

Table of Contents
Contents
Chapter 1 Piano Assembly 8-12
13
14
15
16
21
21
27
27
27
25
23
28
30
31
Chapter 2 Front Panel
Using the Bluetooth
1.Using Headphones
2.Aux In Out
3.MP3 Aux In
Chapter 3 Select Sounds
Chapter 4 Layering
Chapter 5 Splitting
Chapter 7 Recording
22
Chapter 8 DemoSong/Dual
23
Chapter 9 Metronome/Trans
24
Chapter 10 Pedals
Chapter 11 MIDI
Chapter 14 Demo Song List
Chapter 13 Drum Sets
Chapter 15 Sonatine,Rhythm List
Chapter 16 Specification
.
17-20
Chapter 6 Function
27
Chapter 12 Connection

1.The name of each part
Piano Assembly
Chapter 1 Piano Assembly
8

Power Adapter User manual
➏Screws for side panel and keyboard 4EA
➐Screws for side panel and pedal box 4EA
➑Screws for rear panel 2
➒6
➓Cord holder 2
Support block for pedal box 2
➊Keyboard 1 EA
➋Side panel of stand(Left) 1 EA
➌Side panel of stand(Right) 1 EA
➍Pedal box 1 EA
➎Real panel 1 EA
Check that all of the following items are present.
Accessories
Chapter 1 Piano Assembly
EA
EA
EA
EAScrews for rear panel and side panel
➏ ➐ ➑ ➒ ➓
➊
➌
➋
➒
➑
➐
➍
Pedal Adjuster bolt
➏
➎
➒

Please check the quantity of related part.
Piano Assembly 9

➍
➌
➋
➍
➐

➎
➒
➑
➓
➍
➋
➐
➌
➒
➓
Chapter 1 Piano Assembly
Side Panel and Pedal Box Assembly
You can find the pedal cable in the pedal box . Untie
and straighten out the bundled pedal cable.
Place the pedal box on the support block for pedal
box . Then it will be the same as the position of the
left side panel holes. It can be easily fastened by using
the screw bolts .
The right side panel is also fastened the same way.
Left Side Panel
Pedal Box
Support block for
pedal box
Right Side Panel
Screws for Pedal Box
Rear Panel Assembly
Fit into the rear panel's hole in the side panel
brackets and then use the screws to fasten the rear
panel.
➎
➑
Use the screws to fasten the bottom of the rear
panel.
Attach the pedal cord holders to the rear panel
as shown, then clip the cord into the holders
Rear Panel
Pedal cord
1. Stand Assembly
Piano Assembly
10

Piano Assembly
Chapter 1 Piano Assembly
Mounting the keyboard
Place the keyboard on the stand and fit into the holes
in the side panel brackets.
Fasten the keyboard to the side panel using screws .
CAUTION : Have a second person hold the
keyboard steady until the side panel screws are
installed.
Fasten between the keyboard and the leg using
screws .
Insert the pedal cable plug into the pedal jack located
on the bottom of the keyboard.
Rotate the pedal adjuster until it comes in firm contact
with the floor surface. If the adjuster is not in firm
contact with the floor, the pedals will wobble and may
malfunction.
➊
➏
➒
➐
Keyboard
Pedal cord
Pedal Adjuster
Insert the pedal cord plug to the pedal jack from the rear.
Pedal cord connection
●Connect the pedal cord after assembly is complete.
●If the connection is incorrect the pedal will not working.
11

12 Piano Assembly
Power
Chapte 1 Piano Assembly
2. Applying Power
Connecting the power cord
First insert the plug of the AC power cord into the AC connector on the Adaptor, then plug the
other end of the cord into the proper AC outlet on the wall. In some areas a plug adaptor may
be provided to match the pin configuration of the AC wall outlets in your area.
Plug the thin DC power cord into the DC Power Jack on the back of the piano.
Turn the power on
Press the power switch located on the right cheek block to turn the power on. The display
located in the center of the front panel should light with various patterns and after a
short time display "GRAND PIANO".
CAUTION
Even when the instrument is turned off, AC power is still flowing to the adapter at a
minimum level. When you are not using the instrument for a long time or during
electrical storms, unplug the AC power cord from the wall outlet.
3. Setting the Volume
To adjust the volume, use the [Volume] knob located on the right cheek block.
Play the keyboard while you adjust the knob to a comfortable and realistic
volume.
NOTE
Adjusting the [Volume] knob also affects the output level of the
Phones jacks and the output level of the Audio Out jacks.

Split key
Touch
Trans
Layer
Record Play/Stop
Split
Demo
Jump
Voice Piano
Rhythm
Previous- Next +
Favorite1 Favorite 2
Function
Trans/Tempo
Volume Split key
1
2
3
4
5
6
7
8
9
10
13
2

3

Split key
Split key
4

Split key
Split key
5

6

6

6

6