Kuvings CB-1000 User manual

11EN221037A
COMMERCIAL
AUTO VACUUM BLENDER
User Guide
• After you read this manual, keep in the place
you can reach easily.
• By scanning the QR code, you can see the
product related videos.
US
US
How to use
ENFR

02 03
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Important Safeguards
Safety Warning (Check Box)
Safety Precaution (Check Box)
* For safe use of the product, please ll in the
check box before using the product.
Parts
Capacity Guide by Ingredients
How to Assemble & Separate
How to Use
Cleaning and Care
Caution
02
04
05
06
07
08
12
13
14
Part 1 Part 2
How to Use Each Function
Operation Guide by Function
Auto Blending Recipe Program Settings
Recipe Program List
Setting Mode
DIY Recipe Program Settings
Vacuum Pressure Setting
Before Requesting Service
Specifications
16
18
21
22
24
26
27
28
30
Contents
Important Safeguards
Flashing light indicates ready to operate. Avoid any contact with blades or
moveable parts.
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility
for examination, repairor electrical or mechanical adjustment.
The use of attachments, including canning jars, not recommended by
the manufacturer may cause a risk of injury to persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter.
Do not let cord contact hot surface, including the stove.
Do not place on or near a hot gas or electric burner or in a heated oven.
Do not use appliance for other than intended use.
Do not blend hot liquids.
Blades are sharp. Handle carefully.
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will t in a polarized outlet
only one way. If the plug does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician. Do not modify the
plug in any way.
If the Power plug & Cord is damaged, it should be replaced by the
manufacturer, their dealer, or a qualied technician to avoid any danger.
When transferring or lending this product to another person,
do so together with the instruction manual.
Follow the instructions of this product in the user manual.
Drive sockets are consumables and should be checked periodically for
visible wear, cracks, or damage. (there may be dierences in lifecycles a
ccording to the usage and number of uses)
Read all instructions.
To protect against risk of electrical shock do not put (ex; Power cord,
Plug, Motor etc.) on water or other liquid.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge, unless they are closely supervised and
instructed concerning use of the appliance by a person responsible for
their safety. Close supervision is necessary when any appliance is used
by or near children. Children should be supervised to ensure that they
do not play with the appliance.
Turn the appliance OFF, then unplug from the outlet when not in use,
before assembling or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the outlet. Never pull from the
power cord. Permanently Installed - Make sure appliance is OFF when
not in use, before putting on or taking o parts, and before cleaning.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
1.
2.
3.
4.
When using electrical appliances, basic safety precautions
should always be followed including the following:
ㆍSave the instruction manual for future reference.
ㆍ
If the appliance is given away as a gift, please include the manual with the product.
ㆍThese instructions are also available on www.kuvings.com
SAVE THESE INSTRUCTIONS
EN

04 05
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Check Box Caution
Do not hold blades with hands when using or cleaning
the product.
→
It may cause injury.
Store away from children or infants’reach.
→
It may cause injury.
Do not put other parts or tools aside from components
in the container before using the product.
→
It may cause safety accidents.
Please unplug the product and use a dry towel when
cleaning.
Do not place in a place with high heat, oil, moisture, dust,
or splashing water.
→
It may shorten the lifespan of the product.
Do not use on a slope or unstable place.
→
If the product falls, it may result in damage or
safety accidents.
Do not clean with inammable materials or chemicals.
→
It might cause electric shock, re or explosion.
Check Box Caution
Do not plug multiple power plugs into one outlet at the
same time.
→
It may cause abnormal heating or re.
Do not unplug the plug with wet hands.
→It may cause electric shock.
When not in use, pull the power plug from the outlet.
→It may cause electric shock.
Do not bend the power cord excessively or put a heavy
object on it to prevent damage.
→It might cause a short circuit or re.
Do not clean dust or water on the contact part of the power
plug and pin with a wet cloth.
→It might cause electric shock or re.
Unplug while not in use
Prohibited Do not x or alter
Caution
For safe use of the product, please ll in the check box before using the product.
The following precautions are provided to ensure the safety of the user.
Please carefully read through the precautions when using the blender.
For safe use of the product, please ll in the check box before using the product.
Safety Warning (Check Box) Safety Precaution (Check Box)
Warning : Failure to comply with the Guide may result in death or injury.
Caution : Failure to comply with the Guide may result in injury or product damage.
EN

06
COMMERCIAL AUTO VACUUM BLENDER
Vacuum Module
When vacuum blending, keep the container
in a vacuum conditon.
Sound Enclosure
Built-in vacuum function and automatic
open/close function, which minimizes noise
generated during blending.
Vacuum Inlet(Back of the body)
When using the vacuum function, the air
inside the container is sucked.
Power Pin(Back of the body)
When the automatic open and close function
is used, power is transmitted to the motor.
Container Lid
A double layered cover is applied to prevent
the ingredients from popping out during
blending. It can be easily open and close.
Container Lid Packing
The silicone packing makes the container lid
close the container. It must be used fully fasten.
Container
Made with ECOZEN, it is a BPA-free and
Eco-friendly Container harmless to
human health.
Blade Set
Specialized in making ice recipes such as
crushing ice and smoothies by applying a
straight blade made of STS material.
Couples Ring
It helps to stably fasten the container blade
set in the body.
Cushion Pad
Fix the Sound Enclosure and Container
to the body.
Air full Gasket
By using the vacuum and automatic
open/close functions, the Sound Enclosure
will stick to the body.
Quick Start Button
You can quickly and easily execute the
frequently used auto blending button 1.
Control Panel
You can operate the product easily and
check the operation status of the product
in real time through the display.
Foot Rubber
It reduces product noise and prevents shaking.
Power Switch(Back of the body)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
A
B
C/D
E
F
G
H
I
J
M
K
N
L
Parts Capacity Guide
by Ingredients
48oz
Capacity for general ingredients
(Fruits, vegetables, liquid, Ice, etc.).
27oz
Maximum capacity for dairy ingredients
(Milk, soy milk, dry milk, etc.).
10oz
Minimum liquid capacity for blending
* If the amount is less than the minimum amount,
blending may not be carried out properly.
* Follow the loading guide :
Liquid (milk, water, etc.) →Wet ingredients (pineapple,
fruits, etc.) →Soft ingredients (leafy vegetables) →
Hard ingredients (carrots, ice, etc.)
* Add liquids (Water, Milk, Juice, etc) because the blades
may be going around or the blending particles may
become rough when the ingredients are thick.
* Please make sure to put ingredients below the maximum
capacity.
48oz
27oz
10oz
Vacuum Cover Vacuum Valve
Vacuum PadVacuum Cap
Vacuum Module Back of the body
A
C D
O
07
COMMERCIAL AUTO VACUUM BLENDER
EN

08 09
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Separation of Vacuum ModuleAssemble the Vacuum Module
12 3
Insert the vacuum pad into the vacuum cap. Remove the module by lifting it up while pressing the buttons on both sides of the
vacuum module at the same time.
Combine the vacuum module from above according to the fastening guide on the top of
the soundproof cover.
Fasten the vacuum valve to the vacuum cap like a picture.
When the connection is completed normally, you will hear a‘click’sound.
After assmble the vacuum cap, fasten the vacuum module cover by turning it clockwise.
Assemble the vacuum pad so that the suction part faces downward.
Tip
Tip
①
②
click
How to Assemble & Separate
Vacuum Module Combination
Vacuum
Module
➊ ➊
➊
➋
➋
➌
“Rinsing reminder system”is programmed for periodic inspection of the vacuum module.
When 'PLEASE RINSE VACUUM MODULE' appears on the display screen,
refer to the [Vacuum Module Assembly] section in the manual to disassemble and clean.
Dry the moisture out before use.
※
EN

10 11
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Assemble of Sound Enclosure to the Body
1
1
2
2
3
Separation of Sound Enclosure Separation of the Cushion Pad
Assemble of the Cushion Pad
Assemble Foot Rubber / Separation of Foot Rubber
* When disassembling, if the cover is spread too far from both sides, it may cause damage to
the product.
* The center of gravity of the Sound Enclosure is at the back, so when removing the cover,
please separate it from the rear.
* When assemble the body, use the product after conrming that the groove of the
Sound Enclosure is completely combined with the cushion pad.
* The center of gravity of the Sound Enclosure is at the back, so when removing the
Sound Enclosure, please separate it from the rear.
Cushion Pad 2
Cushion Pad 1
Quick
Start Button
Air full Gasket
Body
How to Assemble & Separate
With the container removed, open the Sound Enclosure slightly upwards.
Lifting the cushion pad 1 as shown in the picture.
As shown in the gure, fasten Cushion Pad 2 according to the Vacuum Inlet and Power Pin,
on the back of the body with the Air Full Gasket, located on the front of the body.
Fit the foot rubber with the grooves on the lower base of the body.
Grasp both sides of Cushion Pad 2 with both hands and lift it slightly twisting.
Fasten the Cushion Pad 1 as shown in the gure, according to the body container fastening part.
Separate the foot rubber from the base by one as if twisting from the back to the front.
In that state, separate the cushion pad 2 as if lifting it from front to back.
Open the Sound Enclosure slightly upwards.
Open the cover slightly to the sides and remove from the cushion pad fastening point.
In that state, remove the cover as if pushing the Sound Enclosure behind the body.
In that state, hold both sides of the Sound Enclosure and pull it forward from the back of
the body to t the fastening bezel of the cover with the cushion pad fastening points.
➊
➊
➊
➊
➋
➋
➋
➌
➊
➋
➋
Sound
Enclosure
*In order to use the vacuum function normally, be careful not to fold the Air Full G asket,
and then fully fasten the Cushion Pad 2.
EN

12 13
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
READY
COVER OPEN
WELCOME
KUVINGS
WELCOME
KUVINGS
Fasten the Sound Enclosure to the Body.
- Check if the vacuum module is properly connected to the
Sound Enclosure.
- Check that the Sound Enclosure is properly
inserted into the cushion pad.
* If the Sound Enclosure is not properly fastened,
the ‘Automatic open/close’ and ‘vacuum’ functions may not work.
Put the ingredients into the container and close
the container lid.
- Cut the ingredients into 3cm or less and put it in less than the
maximum capacity.
- Check if the lid is properly fastened to the container.
When the operation is complete, turn o the
power and disconnect the power plug.
- Blending stops by pressing the‘Start/Stop’button or
pressing the‘Control panel button’.
When the power is connected, it will be in power standby
mode.
- Display: When the program loading is completed, READY is
displayed on the screen.
- Control panel: The white LED of the control panel button
blinks once.
Select the control panel button to operate the product.
- When you select a button on the control panel, the button's
LED lights up in white and blending operate.
- Press the‘Auto Vacuum’button to turn on the white LED and
activate the ‘Vacuum Mode’.
- When you press the‘Auto open / close' button, the white
LED lights up and the‘Auto open / close’mode is activated
after vacuum.
READY
COVER OPEN
WELCOME
KUVINGS
WELCOME
KUVINGS
READY
COVER OPEN
WELCOME
KUVINGS
WELCOME
KUVINGS
READY
COVER OPEN
WELCOME
KUVINGS
WELCOME
KUVINGS
1
2
3
4
5
2
Container Set
1
Sound Enclosure / Body
- Clean the Sound Enclosure and Body with dry cloth.
* Putting Sound Enclosure & Body in water
may cause failure; this can be repaired by paid service.
(1) General Cleaning & Care
①
Pour 400ml of water and one or two drops of neutral detergent
in the container and blend at 70% speed for 20~30 seconds.
②
When blending is complete, remove the residue with a soft cloth or
sponge Then rinse it throughly with clean water.
(2) Thorough cleaning (in case of severe calcareous
contamination inside the blade or container)
①
Pour 50g of citric acid in a container based on 1L of hot water
(140℉), dissolve it completely, Then soak it for at least 3 hours.
②
After soaking, blend at 70% speed for 20~30 seconds to remove scale.
③
When blending is complete, discard the water inside of the container, remove
the residue with a soft cloth or sponge, and rinse thoroughly with clear water.
(3) Attention (For paid service)
①
If the outer bottom surface (coupling) is immersed in water when washing the container,
malfunction and It may cause rust.
②
Do not wash the container set into the dishwasher.
③
Blade set will rotate if detergent remains or immersed in water.
It may cause corrosion (wear phenomenon) of parts.
How to Use Cleaning and Care
* After purchasing the product, clean the container set (container lid, Container Lid Packing,
container and blade set) with dishwashing detergent before use.
* When used for the rst time, a small amount of smoke and odor may be generated from the body.
* Parts made of rubber must be wiped with a wet tissue (wet cloth) or washed in cold running water,
and then dried suciently. (If you wash with hot water or a dishwasher, it may cause damage to
function due to deformation.)
Washing may take longer if the water temperature is low. A rough scrubber may scratch
the inner side of the container. Be sure to clean with a soft cloth or soft sponge.
Tip
EN

14 15
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
- Check that the product is properly assembled.
(Refer to p.8 ~ p.11)
- The Auto open/close function can be used only
when the Sound Enclosure is properly fastened.
- Check the condition of consumables such as containers,
blades, and drive sockets to maintain blending performance.
- For safe blending, read the manual thoroughly before
using the product.
Before Use
- Do not run the product without any ingredients in the container.
(It may cause the product damage and/or shorten product's life.)
- Use on a dry and at surface, and do not shake or move while
operating.
- Be sure to separate the container from the body after
blending is complete.
- Never put anything other than ingredients into the container.
(Do not put spoons, forks, chopsticks, etc.)
- Blending performance may vary depending on the order and
amount of ingredients.
* Follow the loading guide : Liquid(milk, water, etc.) → wet ingredients(pineapple, etc.)
→ Soft ingredients(leafy vegetables) → Hard ingredients(ice, etc.)
- If the motor protection sensor does not work (motor does not stop) due to noncompliance of
standard amounts, cool o the motor for more than 30 minutes and restart the machine.
While in Use
- After use, immediately wash the container and store it.
- Do not wash the Body and Sound Enclosure with water but
wipe it with soft cotton cloth.
- After cleaning the vacuum module, be sure to reassemble it in a
completely dry state before use.
- Do not put parts such as containers in the dishwasher to wash them.
(It may shorten the life of parts and cause malfunction.)
After Use
*Do not use the product other than its intended purpose.
(Please recommend this blender only for making beverage.)
Part 1
1
2
3
Contents
Caution
Important Safeguards
Safety Warning (Check Box)
Safety Precaution (Check Box)
* For safe use of the product, please ll in the
check box before using the product.
Parts
Capacity Guide by Ingredients
How to Assemble & Separate
How to Use
Cleaning and Care
Caution
02
04
05
06
07
08
12
13
14
Part 2
How to Use Each Function
Operation Guide by Function
Auto Blending Recipe Program Settings
Recipe Program List
Setting Mode
DIY Recipe Program Settings
Vacuum Pressure Setting
Before Requesting Service
Specifications
16
18
21
22
24
26
27
28
30
EN

16 17
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
①
Start/Stop Used to activate or stop the
selected function.
②
Pulse Used to activate the Pulse function.
③
Display Shows the blending status in real
time.
④
Manual
Speed Control Use to adjust the blending speed.
⑤
Auto Blending
You can select 5 out of 35 recipe
programs and input them into
buttons 1~5 to use.
⑥
Auto Open/Close Used to set the automatic
opening/closing mode.
⑦
Auto Vacuum Used to set the vacuum mode.
①
②③
⑤ ⑥ ⑦
④
⑧
ON/OFF Power Switch The button on the back of the body
is used to turn the power on / o.
⑨
Quick Start Button
During auto blending, it is used to
activate the most frequently used
recipe function, recipe 1.
How to Use Each Function
EN

18 19
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Control
Panel Features How to Use Display
Pulse
Manual
Mode
Pulse
- Pressing the 'Pulse' button activates
the 'Pulse' function at 50% speed.
(Pulse works only while the button is
pressed.)
Pulse Speed Setting
- Shortly press the ‘Pulse’button once,
then ‘Manual Speed Control’By
pressing the button, Pulse speed can
be set from 7% to 100%.
(Initial setting speed: 50%)
* It is maintained at the last speed setting
value, and initialized when the power
is turned o or the power cord is
disconnected.
Auto
Vacuum
Auto
Open/Close
Auto Vacuum Mode
- If you press the‘Auto Vacuum’
button in the power standby state,
the ‘Auto Vacuum’ mode.
* Close the Sound Enclosure before
operating.
* After blending, do not press or bind
the Sound Enclosure until the vacuum
is completely released.(It may cause
malfunction or damage.)
Auto
Open/Close
Auto Open/Close Mode
- If you press the‘Auto open/close’
button in the power standby state,
the ‘Auto open/close’mode is activated.
* When the Auto open/close mode
is activated, the Sound Enclosure
automatically open & close immediately
after blending.
* When the Sound Enclosure
opens and closes automatically, do not
press or open the cover by force.
(It may cause malfunction or damage.)
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
Control
Panel Features How to Use Display
ON/OFF
Power
Switch
Power
mode
Power Standby
After connecting the power plug to
the outlet, press the ON/OFF button to
enter the 'Power Standby' state.
When the Sound Enclosure is closed
When the Sound Enclosure is open
Start/Stop
Manual
mode
Manual Blending (Normal)
- Press the 'Start/Stop’button at standby
mode to operate the blending function
to blend at a set speed.
(Initial setting speed: 50%)
Manual Blending (Vacuum)
- To Activate the 'Vacuum Mode' Press the
'Auto Vacuum' button and then press
the ‘Start/ Stop’button at standby mode
to operate the blending function after
vacuum. (Initial setting speed: 50%)
* If you press the‘Manual Speed Control ’
button during blending, you can adjust
the speed from 7% to 100%.
* It is maintained at the last speed setting
value, and initialized when the power
is turned o or the power plug is
disconnected.
Stop Function
- If the ‘Start/Stop’ button is pressed
during the blending, the function in
operation is stopped.
Manual Blending (Normal)
Manual Blending (Vacuum)
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
Operation Guide by Function
*In the 'Auto Vacuum' mode, the backow prevention mode is activated and the vacuum-related
functions cannot be used continuously.
*In order to reuse the 'Auto Vacuum' mode and related functions, separate the container
completely from the body, then reattach it.
EN

20 21
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Control
Panel Features How to Use Display
Auto
Blending
(Button
1~5)
Automatic
Mode
Auto Blending (Normal)
- When you press the 'Auto Blending'
button in the power standby state,
Auto Blending function works with
program already set.
Auto Blending (Vacuum)
Activate the‘Vacuum Mode’by
pressing the‘Auto Vacuum’button in
the power standby state. Then, if you
press the‘Auto Blending’button, the
auto blending function is activated
after vacuum.
Quick
Start
Button
Quick Blending(Normal)
- If you press the‘Quick satrt button’
in the power standby state, the
quick blending function is activated.
* Quick blending operates the
function set in Auto Blending
Button 1.
Quick Blending(Vacuum)
- In the power standby state, press
the‘Auto vacuum’button to activate
the ‘Vacuum mode’and then press
the ‘Quick start button’to activate
the quick blending function after
vacuum.
Auto Blending (Normal)
Auto Blending (Vacuum)
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
BUTTON-1
01 0:18
BUTTON-1
01
0:10
BUTTON-1
01 0:18
BUTTON-1
01
0:10
BUTTON-1
01 0:18
BUTTON-1
01
0:10
BUTTON-1
01 0:18
BUTTON-1
01
0:10
(Refer to p.7 Capacity Guide by Ingredients )
Order Details Display
1
Press one of the 'Auto Blending' buttons 1 to 5 and
one of the manual speed control up/down buttons
at the same time.
2
When the recipe setup screen appears, use the
'Manual Speed Control up/down' buttons to
select the recipe program you want to set.
3
After selecting the recipe program, press the
'Auto Blending' (1~5) button you want to set up.
(ex. Press button 4 for use recipe program 05.
'RECIPE 05 --> BUTTON 04' is displayed on the
screen.)
4
Recipe setting is completed by pressing the
'Start/Stop' button. If 'COMPLETED' appears on the
screen, the selected program has been entered.
Set recipe program 5 on
auto blending button 4
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
* This is a method to select and input a program among 35 recipe programs.
Operation Guide by Function Auto Blending Recipe Program Settings
EN

22 23
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Order Recipe Program Working Algorithm
Operating
Time
1
Smoothie 1
Hold for 18 seconds at 70%
18"
2
Smoothie 2
50% for 6 seconds ➞85% for 12 seconds
18"
3
Iced Coee
Rapidly increase to 100%
10"
4
Milkshake
Increase to 50% ➞Drop to 25% ➞Slowly drop to 15%
20"
5
General Juice
Increase the top speed (100%) step by step
20"
6
General Smoothie
Start with 75% ➞Increase ➞Decrease ➞Top 100%
20"
7
Deep Smoothie
50% for 10 seconds ➞100% for 20 seconds
30"
8
Large Smoothie
10% for 10 seconds ➞30% for 5 seconds ➞50% for 5 seconds
➞70% for 20 seconds
40"
9
Iced Coee 2
Rapidly increase to 100%
13"
10
Heavy Coee
Increase to 50% ➞Slowly decrease up to 25%
➞Rapidly increase to 100%
30"
11
Multiple Coees
Increase to 25% ➞Slowly increase to 50% ➞Increase to 100%
25"
12
Multiple Coees 2
Increase to 25% ➞Slowly increase to 50% ➞Increase to 100%
30"
13
Ice Cappuccino
Increase step by step to 75%
14"
14
Ice Cappuccino
large
Increase step by step to 75%
18"
15
Medium Shake
Increase to 50% ➞Drop to 25% ➞Slowly drop to 17%
30"
16
Large Shake
Increase to 100% ➞Drop to 25% ➞Slowly drop to 15%
20"
17
Small Shake
Increase to 58% ➞Drop to 25%
15"
18
Heavy Shake
Increase to 80% ➞Drop to 50% ➞Slowly increase to 100%
25"
* Depending on the capacity and condition of the ingredients, select the recipe program and use it.
Order Recipe Program Working Algorithm
Operating
Time
19 Multiple Shake
Increase step by step to 100%
25"
20 Ice Cream Drinks
55% for 5 second ➞25% for 7 seconds ➞12% for 16 secodns
28"
21 Heavy Cream Drinks
51% for 10 seconds ➞85% for 10 seconds
20"
22 Thick Blend
15% for 7 seconds ➞Increase step by step for 21 seconds to 85%
28"
23 Multiple Blend
Increase to 40% ➞ncrease step by step to 75%
25"
24 Small Cocktail
90% for 13 seconds
13"
25 Large Cocktail
Increase to 45% then progress to 100%
25"
26 Juice
10% for 10 seconds ➞30% for 2 seconds ➞50% for 2 seconds
➞70% for 16 seconds ➞90% for 20 seconds
50"
27 Mix
100% for 7 seconds
7"
28 Multipurpose 1
10% for 2 seconds ➞30% for 2 seconds ➞70% for 10 seconds
14"
29 Multipurpose 2
15% for 10 seconds ➞50% for 4 seconds ➞70% for 13 seconds
25"
30 Multipurpose 3
10% for 12 seconds ➞50% for 4 seconds
➞60% for 4seconds ➞70% for 20 seconds
40"
31 Multipurpose 4
60% for 50 seconds
50"
32 General Program 1
100% for 25 seconds
25"
33 General Program 2
Slowly increase step by step to 100%
45"
34 General Program 3
40% ➞15% ➞90%
24"
35 General Program 4
45% ➞Increase step by step to 75%
35"
Recipe Program List
EN

24 25
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Order Details Display
7
<LED Brightness Control>
The LED brightness can be controlled.
* LED brightness control method
①
Select the desired brightness by pressing the auto blending
button (numbers 1 to 5).
(The larger the number, the brighter the LED)
②
After selecting the desired LED brightness, press the
'Start/Stop' button.
(Return to the main screen when setting is complete)
8
<Buzzer Sound Setting>
Buzzer sound setting’is available.
* It is possible to increase the sound by pressing button 1, and
decrease the sound by pressing button 2.
* Press the Start/Stop button to complete the setting.
9
<Sound Enclosure Auto Open/Close Setting>
Sound Enclosure 'Auto Open/Close' setting is possible.
* How to set Auto Open/Close for Sound Enclosure
①
Press button 1 to select 'Working' and press the button 2 to
select 'Stop'.
②
After selection, press the Start/Stop button to complete the
setting.
(Returns to the main screen when setting is complete)
* Working : Blending continues even if the Sound Enclosure is
opened during blending in auto open/close mode.
* Stop : Blending stops if you open the Sound Enclosure during
blending in auto open/close mode.
10
<Manual Mode Continuous Use Time Limit>
It can be set to run from 30 seconds up to 3 minutes.
(Initial factory setting: 1 minute 30 seconds)
* Press the Start/Stop button to complete the setting.
* The usage time can be adjusted with button 1 or button 2.
* It is possible to increase the time with button 1, and decrease
time with button 2.
11
<Factory Reset>
Factory reset’is possible.
* Factory reset method
①In factory reset mode, if you press and hold button 1 for 1
second, PROGRAM RESET is displayed on the screen, and if
you press the start/stop button, factory reset is completed.
(Returns to the main screen when reset is complete)
* LED brightness control, motor temperature, and total
operating time are excluded from the factory reset settings.
Order Details Display
1
Press the two 'Manual Speed Control' buttons (up/down) at the
same time.
2
When connected to setting mode, the program version is
displayed.
* If you press the 'Manual Speed Control' button, you can select
the menu you want to set, is properly fastened.
* Setting mode menu order : Total motor usage time
→ Motor temperature → DIY recipe mode → LED brightness
control → Buzzer sound setting → Sound Enclosure auto
opening/closing setting → Manual mode continuous use
time limit → Factory reset
3
<Motor Usage Time>
The‘Total motor usage time’can be checked.
* The motor usage time is displayed in‘hours/minutes/seconds’.
* If you want to exit from the setting mode, press the Start/Stop
button to return to the main screen.
4
<Motor Cycle Count>
The Motor Cycle Count can be checked.
5
<Motor Temperature>
You can check the motor temperature (NORM/WARM/HOT)
- NORM : Normal operating temperature.
- WARM : Limit temperature for normal operation.
- HOT : The temperature of the motor has overheated and needs
cooling.
* If you want to exit from the setting mode, press the
'Start / Stop' button to return to the main screen.
6
<DIY Recipe Mode>
You can access ‘DIY Recipe Mode’.
* For a detailed setting method, refer to p.26‘DIY recipe program
setting’.
LED brightness 1 setting
LED brightness 5 setting
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
* You can check the motor usage time and temperature, and you can set the LED control adjustment
button, buzzer sound setting, DIY recipe mode, automatic opening and closing of soundproof cover,
and factory reset.
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
Setting Mode
Cover open
Continuous blending
Cover open
Stop blending
PLAY TIME
01:30
BUTTON 1 TO
FACTORY PROGRAM
PLAY TIME
01:30
BUTTON 1 TO
FACTORY PROGRAM
EN

26 27
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Order Details Display
1
Press the two speed control buttons (up/down) at the same
time. Then use the manual speed control buttons(up and down)
to enter DIY recipe mode. After entering, press button 1 to DIY
recipe The setting screen appears.
2
From section 1 to section 5, you can set the time and RPM for
each section.
* You can register from number 36 to 40, for your desirable
program. Also you can edit/change, and you can add a total
of 5 DIY recipes.
3
Select the DIY recipe number you want to register/change with
the 'Auto Open/Close' or 'Auto Vacuum' button.
(The text displayed at the top of the screen is 'DIY RECIPE NO' /
ex. DIY RECIPE 36)
4
To move to the section you want to set (1~5), select using
buttons 1~5.
5
Select the setting item with the Pulse button.
* M : Pulse (^1^) / Blending (1=1) mode,
P : Rotation speed selection
T : select operating time
6
Press the 'Start/Stop' button to complete set up.
The screen will display 'COMPLETED'.
* If you want to cancel the setting, press Pulse button for
2 seconds.
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^ =2= =3= =4= =5=
P 011 022 033 044 055
T 011 022 003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^ =2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^ =2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
BUTTON 1 TO
DIY RECIPE SET
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
DIY RECIPE 40
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
① ② ③ ⑤④
Order Details Display
1
Press the 'Auto Vacuum' button and the 'Manual Speed Control'
button (up/down) at the same time.
2
When the setup screen appears, use the 'Manual Speed Control'
button to set the desired vacuum pressure.
3
After setting the vacuum pressure, press the 'Start/Stop' button
to complete the setting.
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
기능별 작동가이드
진공압 설정
WELCOME
KUVINGS
PD VER 1000
PG VGR 35A
READY
COVER CLOSED
READY
COVER OPEN
SPEED SET
50% 0:01 0:00
SPEED SET
25% 0:01
AUTO VACUUM 50%
PULSE
25% 0:00
BUTTON-1
01 0:11
AUTO VACUUM 46%
0:00
BUTTON-1
01
0:10
RECIPE 01 RECIPE 05
----->
BUTTON 04
COMPLETED
MOTOR USE TIME
00000:13:04
MOTOR TEMP
NORM
LED LIGHT SET UP
01
LED LIGHT SET UP
05
VOLUME CONTROL
05
Cover Open
Working
Cover Open
Stop
DIY RECIPE 36
M ^1^
=2= =3= =4= =5=
P 011 022 033 044 055
T 011 022
003 004 005
VACUUM SET UP
700 COMPLETED
KUVINGS
VER 1.0
CYCLE COUNT
00000004
DIY Recipe Program Settings Vacuum Pressure Setting
* The higher the vacuum pressure, the perfect vacuum inside the juice is to minimize loss of nutrients and
prevent oxidation/browning/layer separation.
EN

28 29
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
When an Error Occurs During Use
█If hearing abnormal noise
- Check the container rotation state (bearing).
(After separating the container from the body and turning it over, if the lower part of the blade set
at the bottom of the container is turned by hand, if the rotation is not smooth or abnormal noise
occurs, check the product before using it.)
- After stopping the product, check the bonding between the container and the soundproof cover.
- Check the amount of items. (Check if it is the standard amount)
- Please check the size of the ingredients.
█When the body moves slightly during the operation.
- Wipe o any water, oil, or dust from the foot rubber and from the table.
█In case, the product does not operate normally
█There is smoke or burning smell when using the blender for the rst time.
- When using the blender for the rst time, there may be some smoke and/or a burning smell.
It is normal, and it will gradually disappear.
█Container set and Drive socket are consumable parts, so check and replace them periodically
(6 months to 1 year) depending on the frequency of use.
Category Error Code Problems Possible Actions Display
Motor Error
-
If the motor does not rotate
- Check the power plug if it is properly inserted into the outlet.
- Ensure that the Power Switch on the back of the body is turned on.
- Check if the Container is properly connected to the body.
ERROR M-1
When a hall sensor is detected for protect the motor
- After putting the ingredients into the container according to the
standard amount for each ingredients, it is restarted. If it does not
continue to work, check the coupling for damage/wear.
- After cooling the Body in a cool place for at least 30 minutes,
restart it.
ERROR M-2
When motor temperature sensor is detected due to
an increase in the motor temperature
- Unplug the power plug from the outlet.
- After cooling the Body in a cool place for at least 30 minutes,
restart it.
Vacuum Error
ERROR V-1
When parts (Sound Enclosure, Vacuum Module, Container Lid,
Lid Packing, etc.) are not properly connected
- Verify that the components (Sound Enclosure, Vacuum Module,
Container Lid, Lid Packing, etc.) are securely connected.
ERROR V-2
When the Vacuum Module is clogged due to the inow of
foreign substances or bubbles during vacuum, or when there is
residual water after separating and cleaning the Vacuum Module
- Refer to p.7 " Capacity Guide by Ingredients" and place the ingredients
in the container.
- After separating the Vacuum Module from the Sound Enclosure
and cleaning it, the water must be completely drained before use.
ERROR V-3
When the vacuum function cannot be completed normally - Verify that the components (Sound Enclosure, Vacuum Module,
Container Lid, Lid Packing, etc.) are securely connected.
* If the vacuum error persists despite the parts being securely
connected, contact the service center.
Attention
ATTENTION V-4
If vacuum is not maintained after vacuum blending
Before Requesting Service Before Requesting Service
* If the product emits a strange sound, smell or smoke, unplug the power plug immediately from the
outlet and contact the distributor.
ERROR M-1 ERROR V-1
CHECK MANUAL
OR QR CODE
ERROR V-2
CHECK MANUAL
OR QR CODE
ERROR V-3
CHECK MANUAL
OR QR CODE
ATTENTION V-4
CHECK MANUAL
OR QR CODE
ERROR M-2
ERROR M-1 ERROR V-1
CHECK MANUAL
OR QR CODE
ERROR V-2
CHECK MANUAL
OR QR CODE
ERROR V-3
CHECK MANUAL
OR QR CODE
ATTENTION V-4
CHECK MANUAL
OR QR CODE
ERROR M-2
ERROR M-1 ERROR V-1
CHECK MANUAL
OR QR CODE
ERROR V-2
CHECK MANUAL
OR QR CODE
ERROR V-3
CHECK MANUAL
OR QR CODE
ATTENTION V-4
CHECK MANUAL
OR QR CODE
ERROR M-2
ERROR M-1 ERROR V-1
CHECK MANUAL
OR QR CODE
ERROR V-2
CHECK MANUAL
OR QR CODE
ERROR V-3
CHECK MANUAL
OR QR CODE
ATTENTION V-4
CHECK MANUAL
OR QR CODE
ERROR M-2
ERROR M-1 ERROR V-1
CHECK MANUAL
OR QR CODE
ERROR V-2
CHECK MANUAL
OR QR CODE
ERROR V-3
CHECK MANUAL
OR QR CODE
ATTENTION V-4
CHECK MANUAL
OR QR CODE
ERROR M-2
ERROR M-1 ERROR V-1
CHECK MANUAL
OR QR CODE
ERROR V-2
CHECK MANUAL
OR QR CODE
ERROR V-3
CHECK MANUAL
OR QR CODE
ATTENTION V-4
CHECK MANUAL
OR QR CODE
ERROR M-2
EN

30 31
COMMERCIAL AUTO VACUUM BLENDER COMMERCIAL AUTO VACUUM BLENDER
Memo
Product Name
Blender
Model Name
IQB300(CB1000)
Rating Voltage
AC120V, 60Hz
Power Consumption
1,700W
Product Size
8.6 X 9.6 X 18.7(in)
Rating Time
Less than 3 minutes (Per 1 time)
Weight
24.7lb
Container Capacity
- Maximum Capacity of blend: 48oz
- Maximum Capacity for general ingredients
(Fruits, vegetables, liquid, Ice, etc.) : 48oz
- Maximum Capacity for dairy ingredients
(Milk, soy milk, dry milk, etc.) : 27oz
Manufacturer
NUC Electronics Co., Ltd.
Country of Manufacture
Republic of Korea
Specifications
EN

BLENDER SOUS VIDE COMMERCIAL
AUTOMATIQUE
Manuel d'utilisation
• Après avoir lu ce manuel, conservez-le dans
un endroit.
• En scannant le code QR, vous pouvez consulter
les vidéos relatives au produit.
FR

34 35
BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE
Précautions Importantes
Avertissement de sécurité (case à cocher)
Précaution de sécurité (case à cocher)
* Pour une utilisation sécurisée du produit, veuillez remplir
la case à cocher avant d'utiliser le produit.
34
36
37
Partie 1 Partie 2
Comment utiliser chaque fonction
Guide d'utilisation par fonction
Paramètres du programme de recette
de mixage automatique
Liste des programmes de recettes
Mode de conguration
Réglages du programme de recettes DIY
Réglage de la pression de la mise sous vide
Avant de solliciter le service après vente
Caractéristiques techniques
48
50
53
54
56
58
59
60
62
Sommaire
Précautions Importantes
Ne faites pas fonctionner un appareil dont le cordon ou la che est endommagé ou après un
dysfonctionnement de l'appareil, une chute ou un dommage quelconque. Retournez l'appareil au centre
de service agréé le plus proche pour examen, réparation ou réglage électrique ou mécanique.Ne laissez
pas le cordon entrer en contact avec une surface chaude, y compris la gazinière.
L'utilisation d'accessoires, y compris les jarres, non recommandés par le fabricant peut entraîner un risque
de blessure pour les personnes.
Ne pas utiliser à l'extérieur.
Ne laissez pas le cordon pendre sur le bord d'une table ou d'un comptoir.
Ne laissez pas le cordon entrer en contact avec une surface chaude, y compris la gazinière.
Ne pas placer l'appareil sur ou près d'un brûleur électrique ou à gaz chaud ou dans un four chaué.
N'utilisez pas l'appareil à d'autres ns que celles prévues.
Ne pas mélanger de liquides chauds.
Les lames sont tranchantes. Manipulez-les avec précaution.
Cet appareil est équipé d'une he polarisée (une lame est plus large que l'autre). que dans un sens. Si la
che ne s'insère pas complètement dans la prise, inversez-la. Si elle ne s'adapte toujours pas, contactez un
électricien qualié.
Ne modiez pas la che de quelque façon que ce soit.
Si la che et le cordon d'alimentation sont endommagés, ils doivent être remplacés par le 16. Si la che et
le cordon d'alimentation sont endommagés, ils doivent être remplacés par le fabricant, son revendeur ou
un technicien qualié.fabricant, son revendeur ou un technicien qualié pour éviter tout danger.
Lorsque vous transférez ou prêtez ce produit à une autre personne, faites-le avec le manuel d'instructions.
Suivez les instructions de ce produit dans le manuel d'utilisation.
Les connecteurs sont des consommables et doivent être contrôlés périodiquement pour vérier qu'ils ne
présentent pas d'usure visible, de ssures ou de dommages (il peut y avoir des diérences dans les cycles
de vie en fonction de l'usage et du nombre d'utilisations).
Lisez toutes les instructions.
Pour vous protéger contre les risques d'électrocution, ne mettez pas (ex : cordon d'alimentation, che,
moteur, etc.) dans l'eau ou tout autre liquide.
Cet appareil n'est pas destiné à être utilisé par des personnes (y compris les enfants) dont les capacités
physiques, sensorielles ou mentales sont réduites, ou qui manquent d'expérience et de connaissances, à
moins qu'elles ne soient étroitement surveillées et ne reçoivent des instructions concernant l'utilisation
de l'appareil par une personne responsable de leur sécurité. Une surveillance étroite est nécessaire
lorsqu'un appareil est utilisé par ou à proximité d'enfants. Les enfants doivent être surveillés pour
s'assurer qu'ils ne jouent pas avec l'appareil.
Éteignez l'appareil, puis débranchez-le de la prise lorsqu'il n'est pas utilisé, avant d'assembler ou de
démonter des pièces et avant de le nettoyer. Pour débrancher l'appareil, saisissez la che et tirez-la de
la prise. Ne tirez jamais sur le cordon d'alimentation. Installé de façon permanente - Assurez-vous que
l'appareil est éteint lorsqu'il n'est pas utilisé, avant de monter ou de démonter des pièces et avant de le
nettoyer.
Le voyant clignote pour indiquer que l'appareil est prêt à fonctionner. Évitez tout contact avec les lames
ou les pièces détachées.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
1.
2.
3.
4.
5.
Lors de l'utilisation d'appareils électriques, des précautions de sécurité
de base doivent toujours être respectées, notamment les suivantes :
ㆍConservez le manuel d'instructions pour vous y référer ultérieurement.
ㆍSi l'appareil est oert en cadeau, veuillez inclure le manuel avec le produit.
ㆍCes instructions sont également disponibles sur www.kuvings.com.
CONSERVEZ CES INSTRUCTIONS
Pièces détachées
Guide de capacité par ingrédients
Comment assembler et démonter
le produit
Mode d'emploi
Nettoyage et entretien
Mise en garde
38
39
40
44
45
46
FR

36 37
BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE
Case à cocher Mise en garde
Ne tenez pas les lames avec les mains lorsque vous utilisez
ou nettoyez le produit.
→
Cela peut entraîner des blessures.
Rangez l'appareil hors de portée des enfants ou des
nourrissons.
→Cela peut entraîner des blessures.
Ne mettez pas d'autres pièces ou outils à part les
composants dans le récipient avant d'utiliser le produit.
→
Cela peut provoquer des accidents de sécurité.
Veuillez débrancher le produit et utiliser une serviette
sèche lors du nettoyage.
Ne pas placer dans un endroit où il y a de fortes chaleurs,
de l'huile, de l'humidité, de la poussière, ou des
projections d'eau.
→
Cela pourrait réduire la durée de vie du produit.
Ne pas utiliser sur une pente ou un endroit instable.
→
Si le produit tombe, cela peut entraîner des dommages
ou des accidents de sécurité.
Ne pas nettoyer avec des matériaux inammables ou des
produits chimiques.
→
Cela pourrait provoquer un choc électrique,
un incendie ou une explosion.
Case à cocher Mise en garde
Ne branchez pas plusieurs ches d'alimentation sur une
même prise en même temps.
→
Cela peut provoquer un chauage anormal ou un
incendie.
Ne débranchez pas la che avec des mains mouillées.
→Cela pourrait provoquer un choc électrique.
Lorsque vous n'utilisez pas l'appareil, retirez la che
d'alimentation de la prise.
→Cela pourrait provoquer un choc électrique.
Ne pliez pas excessivement le cordon d'alimentation et ne
posez pas d'objet lourd dessus pour éviter de l'endommager.
→Cela pourrait provoquer un court-circuit ou un incendie.
Ne pliez pas excessivement le cordon d'alimentation et ne
posez pas d'objet lourd dessus pour éviter de l'endommager.
→Cela pourrait provoquer un court-circuit ou un incendie.
Débranchez-le lorsqu'il n'est pas utilisé
Interdit Ne pas réparer ou modier
Attention
Pour une utilisation sûre du produit, veuillez renseigner les cases à cocher avant d'utiliser le produit.
Les précautions suivantes sont fournies pour assurer la sécurité de l'utilisateur.
Veuillez lire attentivement ces précautions avant d'utiliser le blender.
Pour une utilisation sûre du produit, veuillez renseigner les cases à cocher avant d'utiliser le produit.
Avertissement de sécurité (case à cocher) Précaution de sécurité (case à cocher)
Avertissement : Le non-respect de ce guide peut entraîner la mort ou des blessures.
Avertissement : Le non-respect du guide peut entraîner des blessures ou des dommages au produit.
FR

38 39
BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE
Module de mise sous vide
Lorsque vous mélangez sous vide, gardez le
récipient dans une condition de mise sous vide.
Caisson sonore
Fonction d'aspiration intégrée et fonction
d'ouverture automatique, qui minimise le bruit
généré pendant le mixage.
Entrée pour la mise sous vide (à l'arrière du bloc)
Lorsque vous utilisez la fonction de mise sous
vide, l'air à l'intérieur du récipient est aspiré.
Fiche d'alimentation (arrière du bloc)
Lorsque la fonction d'ouverture et de fermeture
automatique est utilisée, l'alimentation est
transmise au moteur.
Couvercle de la jarre
Un couvercle à double couche est utilisé pour
empêcher les ingrédients de sortir pendant le
mixage. Il peut être facilement ouvert et fermé.
Joint de la jarre
Le joint en silicone permet au couvercle de
fermer la jarre. Il doit être utilisé pour une
xation complète.
Récipient
Fabriqué avec ECOZEN, c'est un récipient sans
BPA et écologique sans danger pour la santé
humaine.
Jeu de lames
Conçu pour réaliser des recettes à base de
glace telle que la glace pilée et les smoothies
en utilisant une lame droite en matériau STS.
Socle de rotation
Elle permet de xer de manière stable la lame
de la jarre xée dans le châssis.
Support de protection
Fix the Sound Enclosure and Container
to the body.
Joint d'étanchéité
En utilisant les fonctions de mise sous vide et
d'ouverture/fermeture automatique,
le Caisson Anti-Bruit restera en contact avec le
bloc moteur.
Bouton de démarrage rapide
Vous pouvez utiliser rapidement et facilement
le bouton de mixage automatique du
programme 1 fréquemment utilisé.
Panneau de contrôle
Vous pouvez faire fonctionner le produit
facilement et vérier en temps réel en temps
réel grâce à l'écran.
Socle en caoutchouc
Il réduit le bruit du produit et empêche les
secousses.
Interrupteur d'alimentation
(arrière du bloc moteur)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
A
B
C/D
E
F
G
H
I
J
M
K
N
L
Pièces détachées Guide pratique des
capacités par ingrédients
48oz
Capacité pour les ingrédients courants
(Fruits, légumes, liquide, glace, etc.).
27oz
Capacité maximale pour les produits laitiers
(lait, lait de soja, lait en poudre, etc.).
10oz
Capacité minimale de liquide pour le mixage
* Si la quantité est inférieure à la quantité minimale,
le mixage risque de ne pas s'eectuer correctement.
* Suivez le guide de remplissage :
Liquide (lait, eau, etc.) →Ingrédients humides (ananas,
fruits, etc.) →Ingrédients mous (légumes à feuilles) →
Ingrédients durs (carottes, glace, etc.)
* Ajoutez des liquides (eau, lait, jus de fruits, etc.) car les
lames peuvent tourner en rond ou les morceaux à mixer
peuvent devenir rugueuses lorsque les ingrédients sont
épais.
* Veillez à placer les ingrédients en dessous de la capacité
maximale.
Couvercle du
système sous vide
Valve de mise sous
vide
Bloc de mise sous
vide
Bouchon de mise
sous vide
Module de mise
sous vide
Arrière du
bloc moteur
A
C D
O
39
BLENDER SOUS VIDE COMMERCIAL AUTOMATIQUE
FR
48oz
27oz
10oz