Cable connection instruction
1.Connects A1 and B1, and then connects A2and B2 as
well.
2.Connects C to the last CPU port of KVM switch.
3.Connects D to the connectors of PC or Notebook.
Installation
Before the installation, make sure the peripherals of all PCsare
grounded properly and turned off.
1.Connect the monitor, keyboard and mouse with the Console
Port Connectors.
2.Use the recommended extension cables to connect the
PCs with the CPU Ports of KVM Switch.
3.Turn on the PCs.
Operation
1.The function of LED display:
LED DISPLAY DESCRIPTION
Light off PC power off
Green light on PC power on and connected
Green light on & Red light
flashing PC power on, connected and
selected
Note:It occurs occasionally that the green light of LED display is
on and the red light of LED display keeps flashing after
shutting down the PC because of the PC default.The
condition will not affect the regular operation of KVM switch.
2.2ways for PC selection–Push-button switch, hot key
2-1Push-buttonswitch (Manual Type)
Press the button on front panelto switch the CPU ports.
The red light of LED indicates which PC is selected.
2-2Hot Key option
Hot Key Navigation allows you to select PC fromthe
keyboard directly.
Options for Hot Key Navigation:
§Select PC by Hot Key
§Command mode
§Auto scanmode -3-
§Beep sound on/off option: Press [Right Shift] key
twice to turn on or off the beep soundwhen needed.
§Select PC by Hot Key:
Press either left or right [Ctrl] key twice.
Item Hot Key Operation
Function
IC-712-C[L Ctrl] + [L Ctrl] or
[R Ctrl] + [R Ctrl] Access between two PCs.
IC-714-C[L Ctrl] + [L Ctrl] Switch tothe previous PC.
IC-714-C[R Ctrl] + [R Ctrl] Switch tothe next PC.
§Command Mode:
Press [Num Lock] key twice, and the 3 keys [Num Lock],
[Caps Lock] and [Scroll Lock] will flashto access the
Command Mode.
a). Directly press the function key [F1] ~ [F2] for IC-712-Cor
[F1] ~ [F4] for IC-714-Cto select PC.
b). Press [Left Ctrl] key to disable [Ctrl] and [Shift] hotkey
function.
c). Press [Right Ctrl] key to enable [Ctrl] and [Shift] hotkey
function.
d). Press [Left Shift] key toturn off the beep sound.
e). Press [Right Shift] key toturn onthe beep sound.
f). Press [Left Alt] key to disable Auto skip function.
g). Press [Right Alt] key to enable Auto skip function.
h). Press [Esc] or [Enter] key to quit the mode.
Note:[Ctrl] Hot Key function–Selecting PC port.
[Shift] Hot Key function –Beep sound on/off.
§Auto Scan Mode:
Press [Scroll Lock] key twice to activate the Auto Scan Mode.
The time scale of Auto Scan ranges from 5 to 30 seconds,
and it can be recognized by the lights of the 3 keys [Num
Lock], [Caps Lock] and [Scroll Lock] as the timetable below.
a). Press the right number key [+] to increase time scale.
b). Press the right number key [-] to decrease time scale.
c). Press [Esc] key to quit the mode.
Note:Light(s) corresponding timetable
Seconds Num Lock
On On Off
3.The boot-up default of Smart View KVM Switch is
connected to your first activated PC.
4.When the PC is shut down under the function of “Auto
skips over the power-off PC”, it cannot be turned on again
by keyboard.
-4-
Makesure the cables are qualified and positioned.
Q1 : The keyboard does notrespond accurately.
A1a: Re-install the keyboard. Unplug the keyboard from the
Console Port and plug it back again.
A1b:
Re-install the Smart View KVM Switch. Shut down the PCs,
unplug the cables from the Smart View KVM Switch andwait
forfiveseconds. Then plug the cables back and activate the
PCs.
A1c: When under Auto Scan Mode,please press [Esc] key to
escape.
A1d: PCs can’t supply the power to Smart View KVM Switch.
Please attach a power adapter of DC9V 300mA with positive
central polarity.
A1e: Try another keyboard.
Q2 : The mousedoes notrespond accurately.
A2a: Re-install the mouse. Unplug the mouse from the Console
Port and plug it back again.
A2b: Re-install the Smart View KVM Switch. Shut down the
PCs, unplug the cables from the Smart View KVM Switch,
and wait forfiveseconds.Then plug the cables back and
activate the PCs.
A2c: Make sure the mouse is set on PS/2 mode.
A2d:
PCs can’t supply the power to Smart View KVM Switch.
Please attacha power adapter of DC9V 300mA with positive
central polarity.
A2e: Try another mouse.
Note: If you are using a particular mouse,wesuggestinstalling the
mouse driver from original manufacturer to reveal the
functionality of Smart View KVM Switch.
Q3: The mouse is out of control.
A3: The characteristic of the mouse is inefficient. Try another
superior mouse and plug it back again. Start the operation
after hearing the beep sound.
Q4: There isthe video problem.
A4a: The setting ofresolution or bandwidth isover high. Smart
View KVM Switch supports the VGA, SVGA, Multisync and
XGA (interlaced) with the resolution up to 1920 x 1440 Hz.
The maximum bandwidth is 200 MHz.
A4b: The cable is unqualified. Please use the superior cables of
Smart View cables series.
Q5:
A5:
Why the green light of LED display is on and red light
keeps flashing after shutting down the PC?
Thecondition is normal and causedfrom the PC default. The
condition will not affect the regular operation of Smart View
KVM switch.
Trademarks:
All the companies, brand names, product names are
referred to this manual, are the trademarks or
registered trademarks belonging to their respective
companies.
-5-
