KVMSwitchTech RKD-KVM-19 Series User manual

User Manual
1U LCD Keyboard Drawer
17", 19" screen size
Models
RKD-KVM-17 / 19 Series
- With KVM options
Models
RKD-SKVM-17 / 19
- With KVM options
- 1U 17", 19" screen size
- Designed for SUN Solaris
Models
RKD-KVMSD-17 / 19 Series
- Short depth version
- Without KVM options

Contents
Chapter 1 Getting Started
1.1 Important Safeguards........................................................1
1.2 Regulatory Notice..................................................................2
1.3 Package Contents.................................................................3
1.4 Before Installation..............................................................4
1.5 Unpacking .............................................................................4
1.6 Optional Accessories.............................................................4
1.7 Peripheral Products...............................................................5
1.8 Structure Diagram .................................................................5
1.9 How to Install “One Man” Installation Slides...................... 6-7
1.10 How to Use The Slides........................................................8
1.11 How to Use “RKD” Series LCD Keyboard Drawer...............9
1.12 “S” Series (Single console)
- Use KVMCB-6 to connect to server via USB interface............... 10
1.13 “S” Series (Single console)
- Use KVMCB-6 to connect to KVM via USB interface................. 10
1.14 RKD Series (Single console)
- Use KVMCE-6 to connect to server via PS/2 interface.............. 11
1.15 RKD Series (Single console)
- Use KVMCE-6 to connect to KVM via PS/2 interface ................ 11
1.16 RKD Series (Single console)
- Use KVMCE-6 to connect to server via USB interface............... 12
1.17 RKD Series (Single console)
- Use KVMCE-6 to connect to KVM via USB interface................. 12
Chapter 2 Operation
2.1 On-screen Display Operation ..............................................13
2.2 On-screen Menu..................................................................14
Chapter 3 Standard Specification
3.1 Specifications......................................................................15
3.2 Keyboard & Mouse.........................................................16-17
3.3 How to Use “NS” Keyboard.................................................18

Contents
Chapter 4 Optional Specification
4.1 KVM Options ........................................................................19
4.2 DVI-D Option........................................................................19
4.3 BNC + S-Video Option..........................................................19
4.4 Audio Option.........................................................................20
4.5 DC power Options................................................................20
4.6 Touchscreen Options ...........................................................21
Chapter 5 Troubleshooting........................................ 22
Chapter 6 Dimensions................................................ 23

1.1 Important Safeguards
Chapter1
P.1
Please read all of these instructions carefully before you use the device. Save this
manual for future reference.
What the warranty does not cover
Any product, on which the serial number has been defaced,modi fi ed or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product
modi fi cation, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fl uctuation or failure.
Use of supplies or parts not meeting our speci fi cations.
Normal wear and tear.
Any other causes which does not relate to a productdefect.
Removal, installation, and set-up service charges.

1.2 Regulatory Notice
Chapter 1
P.2
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given
to the correctness of the contents. The information in this document is subject to change without notice.
We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with temperatures not exceeding 40°Cel sius (104°Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally
falling and causing damage to other equipment or injury to persons nearby.
When the drawer is in an open position, do not cover, block or in any way obstruct the gap between
it and the power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the
voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the
cord should be higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to
prevent being damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled
on to the power supply or on other hardware may cause damage, fi re or electrical shock.
Only quali fi ed service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by quali fi ed
service personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
Any changes or modi fi cations made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur ina particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment intoan outlet on a circuit different from that to which the receiver is connected.

1.3 Package Contents
Chapter 1
P.3

1.4 Before Installation
Chapter 1
P.4
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
The surface for placing and un-bo xing the LCD Keyboard Drawer should be stable and level or mounted into a
suitable cabinet.
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt,
heat, water, moisture and vibration.
Position LCD Keyboard Drawer with respect to related facilities.
1.5 Unpacking
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.6 Optional Accessories
1. Combo 4-in-1 KVM
cable 1.1 KVMCE-6 6
feet 1.2 CE-10 10 feet
1.3 CE-15 15 feet
2. USB 2-in-1 KVM
cable 2.1 KVMCB-6 6
feet 2.2 CB-10 10 feet
2.3 CB-15 15 feet
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK) 3.4
CEE 7/4 power cord (German) 3.5
AS 3112 power cord (Australia)
Remarks :
KVMCB-6 is for “S” series only.

1.7 Peripheral Products
Chapter 1
P.5
Item Description
Matrix Cat6 KVM
Matrix Cat6 16 port KVM
Matrix IP Cat6 16 port KVM
Matrix Cat6 32 port KVM
Matrix IP Cat6 32 port KVM
Matrix DB-15 KVM
Matrix DB-15 8 port KVM
Matrix IP DB-15 8 port KVM
Matrix DB-15 16 port KVM
Matrix IP DB-15 16 port KVM
Combo Cat6 KVM
Combo Cat6 8 port KVM
Combo Cat6 16 port KVM
Combo Cat6 32 port KVM
Combo DB-15 KVM Combo DB-15 8 port KVM
Combo DB-15 16 port KVM
PS/2 DB-15 KVM 4 / 8 / 16 port PS/2 DB-15 KVM
Remarks :
“S” Series is for Matrix & Combo KVM only.

P.6
1.9 How to Install "One Man" Installation Slides
Chapter1
Install into rack

1.9 How to Install "One Man" Installation Slides Chapter 1
P.7
Remarks :
NBK-01 is for RKD-KVM-17 / 19 & RKD-SKVM-17 / 19 series only.
NBK-02 is for RKD-KVMSD-17 / 19 series only.
Installation procedures of NBK-02 are same to that of NBK-01.

1.10 How to Use the Slides
Chapter1
P.8

1.11 How to Use "
RKD
" Series LCD Keyboard Drawer
Chapter1
P.9

1.12 “S” Series (Single console)
Chapter1
P.10
- Use KVMCB-6 to connect to server via USB interface
Figure 7. Example of connecting KVMCB-6 2-in-1 USB KVM cable to server via USB interface
1.13 “S” Series (Single console)
- Use KVMCB-6 to connect to KVM via USB interface
Figure 8. Example of connecting KVMCB-6 2-in-1 USB KVM cable to KVM via USB interface
Remarks :
The above connection is only for the LCD keyboard without KVMswitch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.

1.14
RKD
Series (Single console)
Chapter1
P.11
- Use KVMCE-6 to connect to server via PS/2 interface
Figure 9. Example of connecting KVMCE-6 4-in-1 Combo KVM cable to server via PS/2 interface
1.15 RKD Series (Single console)
- Use KVMCE-6 to connect to KVM via PS/2 interface
Figure 10. Example of connecting KVMCE-6 4-in-1 Combo KVM cable to KVM via PS/2 interface
Remarks :
RKD-KVMSD-17 / 19 series are external power versions.
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.

1.16 RKD Series (Single console)
Chapter 1
P.12
- Use KVMCE-6 to connect to server via USB interface
Figure 11. Example of connecting KVMCE-6 4-in-1 Combo KVM cable to server via USB interface
1.17 RKD Series (Single console)
- Use KVMCE-6 to connect to KVM via USB interface
Figure 12. Example of connecting KVMCE-6 4-in-1 Combo KVM cable to KVM via USB interface
Remarks :
RKD-KVMSD-17 / 19 series are external power versions.
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.

2.1 On
-
screen Display Operation
Chapter 2
P.13

2.2 On
-
screen Menu
Chapter 2
P.14

3.1 Specifications Chapter 3
* Note: RKD-KVM-17 / RKD-SKVM-17 series in single console, with Combo Cat6 KVM or Combo DB-15 KVM integration is UL approved

3.2 Keyboard & Mouse
Chapter 3
P.16
For RKD-KVM-17 / 19 & short depth series

3.2 Keyboard & Mouse
Chapter 3
P.17
For RKD-SKVM-17 / 19 series