KWIK GOAL 2B3006 User manual

140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2005, Rev 2017 Kwik Goal Ltd.
ASSEMBLY INSTRUCTIONS FOR 2B3006, 2B3006W, & 2B3006SW DELUXE EUROPEAN CLUB GOAL
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard or packaging immediately;
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
Crossbar Corner (4)
(Part# UZ810)
Post Corner (2)
(Part# UZ811)
Crossbar (2)
(Part# UZ1088)
279-3/4”
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
87-3/4”
Base (2)
Part# Goal Model Number
UZ760 2B3006 2B3006W
UZ1475 2B3006SW -
NZ297 Rev. 07/17/17
Right Post (1)
(Part# UZ1517)
84-3/4”
Left Post (1)
(Part# UZ1516)
84-3/4”
ID STICKER

NZ297 Rev. 07/17/17
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
1998 rev 2009 Kwik Goal Ltd.
IMPORTANT GOAL SAFETY INSTRUCTIONS
READ CAREFULLY
1. Check for structural integrity and proper connecting hardware before every
use. Replace damaged or missing parts or fasteners immediately.
2. Safety/Warning labels must be clearly visible.
3. Securely anchor moveable soccer goals at ALL times.
4. Always instruct players, managers, coaches, trainers, teachers, maintenance
workers and all other personnel who might come in contact with the goal,
on the safe handling of and potential dangers associated with moveable
soccer goals.
5. Always exercise extreme caution when moving goals and provide adequate
manpower to move goals of varied sizes and weights. Moveable soccer
goals should only be moved by authorized personnel.
6. NEVER allow anyone to climb on the net or goal framework.
7. Moveable soccer goals should only be used on LEVEL fields, NEVER on a
slope or hill area.
8. Remove nets when goals are not in use.
9. Most tip-over injuries occur when goals are unattended. Anchor or chain
one goal to another or to nearby fence posts, dugouts, or any other similar
sturdy fixture when not in use. If this is not practical, store moveable soccer
goals in a place where children cannot have access to them.
10. Fully disassemble goals for seasonal storage.

Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1 3/4” Hex Bolt (Part# TZ227) (28)
3/8" x 7/8" Hex Bolt (Part# TZ249) (6)
3/8“ Lock Washer (Part# TZ65) (30)
3/8“ Flat Washer (Part# TZ60) (34)
3/8” Lock Nut (Part# TZ197) (4)
3/8" Square Nut (Part# TZ247) (6)
5/16" Eyebolt (Part# TZ270) (2)
5/16" Flat Washer (Part# TZ269) (2)
5/16” Lock Nut (Part# TZ5) (2)
Assembly Tools
1/2”, 9/16” & 3/4”
Wrenches
9/16
Ratchet with
1/2”, 9/16” & 3/4”
Sockets
Scissors
AND
Post Braces (2)
(Part# UZ737)
Channel Spacer (12)
(Part# UZ812)
Backstay Brace (2)
(Part# VZ328P2)
Backstay (2)
(Part# VZ328P1)
Net (1)
(Part# 3B6826)
Net Strap (1)
(Part# 10B4406 Pack of 2)
Net Clip (80)
(Part# 10B3101 Pack of 100)
Ground Anchor (4)
(Part# 10B103 Pack of 4)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17

3. Attach posts to crossbar corner and post corner as shown. Be sure connections are pressed firmly together
before tightening hex bolts. Note: Square nuts will float loose in net channel until step 6.
Post Corner
Crossbar Corner
KWIKGOAL sticker
Warning sticker
Post Corner
Post Brace
3/8” X 1 3/4”
Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Channel Spacer
Post
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17
Crossbar Corner
3/8” X 1 3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Square Nut
Channel Spacer
Square Nut
Left Post
Left Post

4. Assemble post and bases to crossbars as shown. Be sure connections are pressed firmly together before
tightening hex bolts. Note: Square nuts will float loose in net channel until step 6.
3/8” X 1 3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Crossbar Corner
Channel Spacer
Base
3/8” X 1 3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Crossbar
Crossbar
Base
Base
Crossbar Corner
Crossbar Corner
Channel Spacer
3/8” Flat Washer
3/8” Lock Washer
3/8” X 1 3/4“ Hex Bolt
Crossbar
Post
Square Nut
Left Post
Right Post
Crossbar
Warning sticker
KWIKGOAL sticker
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17

12"
Minimum
Temporary
3/8" X 7/8" Hex Bolt
Spacers (metal)
Threaded Channel
Left and Right Bases
For straight wheels only
3/8" X 1-3/4"
Hex Bolt
Lock Washer
Flat Washer
Post
Post Brace
Base
Channel Spacer
(plastic)
Flat Washer
Lock Washer
3/8" X 1-3/4"
Hex Bolt
3/8" X 1-3/4"
Hex Bolt
Lock Washer
Flat Washer
Post
Post Brace
Base
Channel Spacer
(plastic)
Flat Washer
Lock Washer
3/8" X 1-3/4"
Hex Bolt
Crossbar
Right Post
Left Post
Crossbar
Base
Lift
Lift
5. 2B3006 (10B410 straight wheels) - continue with step 5.
2B3006 (no wheels) - skip to step 6.
2B3006SW (10B414 swivel wheels) - skip to step 6.
Insert two threaded channel spacers from wheel package.
To prevent threaded channel spacers from falling out during
assembly, temporarily insert a 3/8” hex bolt in last threaded
hole of threaded channel spacer and finger tighten only.
6. Lift and insert assembled bases onto assembled posts. Fasten using channel spacers, post braces, and 3/8” hex
bolts. Be sure connections are pressed firmly together before tightening hex bolts.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17

7. Remove 3/8” hex bolts used to temporarily secure channel spacers in bases in step 5. Attach backstays and
backstay braces to square nuts as shown.
Ground
Anchor Holes
Base
Left Post
Crossbar
3/8” Lock Nut
3/8” X 7/8” Hex Bolt
3/8” Lock Washer
Backstay Brace
3/8” Square Nut
3/8” Square Nut
3/8” Square Nut
Backstay
3/8” Flat Washer
5/16” X 1 1/2” Eyebolt 5/16” Flat Washer 5/16” Lock Nut 3/8” X 1 3/4”
Hex Bolt
3/8” Flat Washer
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17
Crossbar
Ground
Anchor Holes
Right Post
Base

8. Set goal onto bases in desired location and mark anchor hole locations. Move goal and dig holes a minimum
of 24” in diameter and 20” deep. (NOTE: Areas subject to heavy ground frost may go as deep as 36”.) Attach
ground anchors to assembled goal. Set goal in desired installation location with anchors in holes, fill holes as
shown, surrounding anchors with concrete. Make sure goal is plumb and level and let concrete cure.
Up - Arch
Down - Bow Left Post
Cause
Bow in Crossbar
Cause
Arch in Crossbar
Crossbar
Right Post
Cause
Arch in Crossbar
12 3/4”
Concrete Detail
Concrete
20”
Minimum
Ground Anchor
Stone
60 Degs. Approx.
24”
Minimum
Cause
Bow in Crossbar
Stone
Ground
Anchor
12 3/4“
20“
Minimim
24“ Dia.
Concrete
Anchoring Detail
1/2“ X 4” Hex Bolt
1/2” Flat Washer
1/2“ X 4” Hex Bolt
1/2” Flat Washer
Ground
Anchor
Ground Anchor
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17
Swivel Wheel
Mounting Hole
Swivel Wheel
Mounting Hole

- Distribute total amount
of weight evenly between
each back corner.
- Always fasten weight to
goal with straps or hardware.
9. The ground anchor and chain leash system
supplied is the recommended and the safest
method of anchoring your goal. However,
counterbalance weight may be used as a
temporary anchoring system. A minimum of
240 lbs. must be placed on the back bottom
bar for the goal to be stabilized. Test
anchoring in accordance with step 10.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17

ANCHOR TEST
1. Clear all persons from a minimum 50 foot radius surrounding the goal.
2. Verify goal is attached to anchors according to instruction.
3. Apply a horizontal pull force of 247 lbs. to the center of the crossbar for 60 - 70 seconds.
Full safety precautions must be taken while performing test.
4. If goal overturns during application of force or does not return to an upright position after removing force, an
alternate anchoring system must be used
10. After installing, test as described below to verify effectiveness of anchor system. If applicable, allow concrete
to fully cure before testing.
Crossbar
247 lbs.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17

11. Attach net strap to the eyebolts in the backstays as shown. Pull net strap tight as shown. (NOTE: Do not over
tighten net strap. Over tightening may damage goal.) Excess strap can be trimmed to length. Leave 12” to
18” of excess strap for ease of removal and re-installation. (Note: To keep end of adjustable strap from fraying,
ends can be melted after being cut.) Tie all excess strap to itself to prevent from hanging in goal area.
Clip
Eyebolt
Net Strap
Pull
Backstay
Net Strap
Backstay
Clip
Eyebolt
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17

Net Clip
Net
Net
Net Clip
CAUTION: DO NOT ATTEMPT TO CLIMB ON GOAL WHILE ATTACHING NET.
12. To attach net to goal, place base of net clip into channel and turn 90 degrees to lock into place. NOTE: BE
SURE GOAL IS PROPERLY ANCHORED BEFORE ATTEMPTING TO ATTACH OR REMOVE NET.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ297 Rev. 07/17/17
Go to kwikgoal.com for additional product information.

ASSEMBLY INSTRUCTIONS FOR SWIVEL WHEELS
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NZ346 Rev. 07/24/17
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2013 Rev. 2017 Kwik Goal Ltd.
(A)”
Rubber Pad (8)
(Part# VZ654)
Hairpin Cotter (4)
(Part# TZ351)
Swivel Wheel (4)
(Part# VZ629)
Cable Lanyard (4)
(Part# VZ653)
12”
Parts
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Swivel Wheel Mounting Bracket (4)
(Part# UZ1356)
Mounting Bracket Pin (4)
Part# Dim (A) Goal Model Number
TZ347 3-5/16” 2B3306SW 2B3406SW 2B3706SW -
TZ348 5-5/8” 2B2001SW 2B3806SW 2B9006SW 2B9004SW
TZ378 4-3/16” 2B3006SW - - -

140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
1998 rev 2009 Kwik Goal Ltd.
IMPORTANT GOAL SAFETY INSTRUCTIONS
READ CAREFULLY
1. Check for structural integrity and proper connecting hardware before every
use. Replace damaged or missing parts or fasteners immediately.
2. Safety/Warning labels must be clearly visible.
3. Securely anchor moveable soccer goals at ALL times.
4. Always instruct players, managers, coaches, trainers, teachers, maintenance
workers and all other personnel who might come in contact with the goal,
on the safe handling of and potential dangers associated with moveable
soccer goals.
5. Always exercise extreme caution when moving goals and provide adequate
manpower to move goals of varied sizes and weights. Moveable soccer goals
should only be moved by authorized personnel.
6. NEVER allow anyone to climb on the net or goal framework.
7. Moveable soccer goals should only be used on LEVEL fields, NEVER on a
slope or hill area.
8. Remove nets when goals are not in use.
9. Most of the tip-over injuries occurred when goals were unattended. Anchor
or chain one goal to another or to nearby fence posts, dugouts, or any other
similar sturdy fixture when not in use. If this is not practical, store moveable
soccer goals in a place where children cannot have access to them.
10. Fully disassemble goals for seasonal storage.
NZ346 Rev. 07/24/17

Swivel Wheel
Mounting Bracket
5/16” X 1” Hex Bolt
5/16” Flat Washer
Swivel Wheel
5/16” Lock Nut
4. Attach swivel wheel brackets to swivel wheels.
Assembly Tools
1/2” & 3/4”
Wrenches
Phillips Screwdriver
Ratchet with
1/2” & 3/4”
Sockets
AND
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
5/16“ x 1” Hex Bolt (Part# TZ330) (16)
5/16” Flat Washer (Part# TZ4) (16)
5/16” Lock Nut (Part# TZ5) (16)
1/2” Lock Nut (Part# TZ349) (4)
3. Apply rubber pads to swivel wheel mounting
brackets at the center of location shown.
Peel Off Backing
Rubber Pad
Swivel Wheel
Mounting Bracket
Rubber Pad
5. Attach mounting bracket pin to swivel wheel bracket.
To tighten lock nut, insert a phillips screwdriver in
hole on mounting bracket pin. Orient hole to
bracket as shown.
Mounting Bracket Pin
1/2” Lock Nut
Swivel Wheel & Bracket
9/16
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
2B3006SW
ONLY
2B3306SW
2B3406SW
2B2001SW
2B3806SW
2B3706SW
2B9004SW
2B9006SW
Add Pad For
2B3806SW
2B3706SW
2B3306SW
NZ346 Rev. 07/24/17

6. Attach swivel wheel assembly on the outside of
goal frame by lifting goal frame at wheel locations
and insert mounting bracket pin into base
bushing. Never install pin into anchor hole.
Note: Attach one wheel at a time and secure in
place (See step 7 & 8) before attaching
remaining wheels.
7. Loop cable lanyard around handle on swivel wheel
assembly.
Swivel Wheel
Assembly Handle
Cable Lanyard
Base Bushing
Anchor Hole
(NO Bushing)
Swivel Wheel
Assembly
Mounting
Bracket Pin
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ346 Rev. 07/24/17

8. Attach hairpin cotter to cable lanyard and secure swivel wheel to goal frame with hairpin cotter as shown.
9. All 4 swivel wheel assemblies must be secured to goal
frame before attempting to move goal. A minimum
of 2 people are needed to move one goal.
WHEELS MUST BE REMOVED
GOAL MUST BE ANCHORED AT ALL TIMES
DO NOT PLAY GOAL WITH WHEELS INSTALLED
10. Grease wheels and casters as needed to keep them spinning freely.
Hairpin Cotter
Cable Lanyard
Mounting Bracket Pin
Hairpin Cotter
Cable Lanyard
Mounting Bracket Pin
WHEELS
MUST BE
REMOVED
GOAL MUST
BE ANCHORED
AT ALL TIMES
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ346 Rev. 07/24/17
Go to kwikgoal.com for additional product information.