KWIK GOAL PRO PREMIER 2B2001 User manual

ASSEMBLY INSTRUCTIONS FOR 2B2001 & 2B2001SW
PRO PREMIER EUROPEAN MATCH GOAL
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has
occurred, notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging
immediately. Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2005, Rev 2018 Kwik Goal Ltd.
Crossbar (2)
(Part# UZ393)
280 in
Right Post (1)
(Part# UZ649)
Left Post (1)
(Part# UZ648)
Parts
NZ255 Rev. 09/11/18
Right Base (1)
Left Base (1)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
®
Part#
Goal#
UZ651
2B2001
UZ1365
2B2001SW
Part#
Goal#
UZ650
2B2001
UZ1364
2B2001SW

140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
1998 rev 2009 Kwik Goal Ltd.
IMPORTANT GOAL SAFETY INSTRUCTIONS
READ CAREFULLY
1. Check for structural integrity and proper connecting hardware before every
use. Replace damaged or missing parts or fasteners immediately.
2. Safety/Warning labels must be clearly visible.
3. Securely anchor moveable soccer goals at ALL times.
4. Always instruct players, managers, coaches, trainers, teachers, maintenance
workers and all other personnel who might come in contact with the goal,
on the safe handling of and potential dangers associated with moveable
soccer goals.
5. Always exercise extreme caution when moving goals and provide adequate
manpower to move goals of varied sizes and weights. Moveable soccer goals
should only be moved by authorized personnel.
6. NEVER allow anyone to climb on the net or goal framework.
7. Moveable soccer goals should only be used on LEVEL fields, NEVER on a
slope or hill area.
8. Remove nets when goals are not in use.
9. Most of the tip-over injuries occurred when goals were unattended. Anchor
or chain one goal to another or to nearby fence posts, dugouts, or any other
similar sturdy fixture when not in use. If this is not practical, store moveable
soccer goals in a place where children cannot have access to them.
10. Fully disassemble goals for seasonal storage.
NZ255 Rev. 09/11/18

Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1-3/4” Hex Bolt (Part# TZ227) (16)
3/8" x 7/8" Hex Bolt (Part# TZ249) (12)
3/8“ Lock Washer (Part# TZ65) (24)
3/8“ Flat Washer (Part# TZ60) (28)
3/8” Lock Nut (Part# TZ197) (4)
3/8" Square Nut (Part# TZ247) (12)
5/16" Eyebolt (Part# TZ270) (2)
5/16" Flat Washer (Part# TZ269) (2)
5/16” Lock Nut (Part# TZ5) (2)
Assembly Tools
AND
Scissors
Ratchet with
1/2”, 9/16” & 3/4”
Sockets
9/16
1/2”, 9/16” & 3/4”
Wrenches
Chain (4)
w/ Snap Link & Anchor Plate
(Part# UZ846 )
Channel Spacer (6)
(Part# UZ812)
Backstay Brace (2)
(Part# VZ328P2)
Backstay (2)
(Part# VZ328P1)
Net (1)
(Part# 3B6826)
Post Brace (2)
(Part# UZ737)
Anchor Bag (6)
(Part# 10B1605)
Net Clip (80)
(Part# 10B3101 Pack of 100)
Ground Anchor (4)
w/hardware
(Part# 10B101 Set of 4)
Net Strap (1)
(Part# 10B4406 Pack of 2)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18

3. Attach left post and right post to crossbar using channel spacers and 3/8” hex bolts. Note direction of decals
before fastening. Place a square nut in each side of the crossbar before inserting channel spacer. Be sure
connections are pressed firmly together before tightening hex bolts.
4. Insert one square nut in each of the assembled posts.
Left Post
Right Post
Crossbar
Decals
3/8” Square Nut
3/8” X 1-3/4” Hex Bolt
Channel Spacer
3/8” Square Nut
3/8” Flat Washer
Right Post
3/8” Lock Washer
Crossbar
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18

3/8” X 1-3/4” Hex Bolt
3/8” Flat Washer
Right Base
3/8” Lock Washer
Crossbar
Channel Spacer
(plastic)
Crossbar
Left Base
Right Base
Decals
5. Attach to Crossbar using channel spacers and 3/8”
hex bolts. Note direction of decals before
fastening. Be sure connections are pressed firmly
together before tightening hex bolts.
6. 2B2001SW - skip to step 8, for all other goals
continue to step 7.
7. Insert two 3/8” square nuts into left base and right
base. NOTE: If installing optional wheels (Part#
10B409), also include two threaded channel
spacers from wheel option package in each
base. To prevent threaded channel spacers or
square nuts from falling out during assembly,
temporarily insert a 3/8” hex bolt in last threaded
hole of the threaded channel spacer or square nut
and finger tighten only.
Threaded Channel Spacer (metal)
(for wheel option 10B409)
Left & Right Base
3/8” Square Nuts
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
Temporary
3/8" x 7/8" Hex Bolt
12"
3/8" Square Nut
Threaded Channel Spacer
(For wheel option 10B409)

8. 2B2001SW ONLY
Insert two 3/8” square nuts into left base and right base at locations shown.
Left Base
Right Base
Crossbar
Insert square nuts
into slot and
slide in direction
shown
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18

***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
Crossbar
Base
Base
Crossbar
Left Post
Right Post
9. Lift assembled bases and insert into
assembled posts. Be sure
connections are pressed firmly
together before tightening bolts. Be
sure to tighten both bolts on each
post brace.
3/8" X 1-3/4"
Hex Bolt
Lock Washer
Flat Washer
Post
Post Brace
Base
Channel Spacer
(plastic)
Flat Washer
Lock Washer
3/8" X 1-3/4"
Hex Bolt

10. Attach backstays and backstay braces using 3/8” hex bolts and square nuts.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
Insert square nuts
into slot and
slide in direction
shown
3/8" Lock Nut
Crossbar
Right
Post
3/8" Flat Washer
5/16" Eyebolt
Backstay
3/8" Flat Washer
3/8" Lock Washer
3/8" x 7/8" Hex Bolt
3/8" x 1-3/4"
Hex Bolt
5/16" Lock Nut
5/16" Flat Washer
3/8" Square Nut
Backstay
Brace

***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
11. Turn goal on to its bases and attach chain leashes. Remove 3/8” hex bolts used to temporarily secure fasteners
to bases.
34"
Assembled
60"
3/8" Flat Washer
3/8" Lock Washer
3/8" x 7/8" Hex Bolt
Chain Leash
3/8" Square Nut
Remove Temporary
3/8" x 7/8" Hex Bolt

***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
Stone
Concrete Concrete
Anchor Hole Detail
(4 places per goal)
20"
MIN
24" MIN
60°
Approx.
Field
Surface
Ground Anchor
12-3/4"
156"
34"
60"
Goal Line
312"
Ground Anchor locations
Centerline of Goal Line
12. Mark ground anchor hole locations. Prepare holes, install ground anchors and pour concrete.

***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
13. After concrete has fully cured, attach chain leashes to ground anchors. Be sure to apply a liberal amount of
anti-seize on bolt threads before installing into anchors. With goal leashed to all four anchors, test in
accordance with step 14.
1/2" Flat
Washer
1/2" Hex Bolt Assembled

- Distribute total amount
of weight evenly between
each back corner.
- Always fasten weight to
goal with straps or hardware.
14. The ground anchor and chain leash system supplied is the
recommended and the safest method of anchoring your
goal. However, counterbalance weight may be used as a
temporary anchoring system. A minimum of 240 lbs. must
be placed on the back bottom bar for the goal to be
stabilized. Test anchoring in accordance with step 15.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18

ANCHOR TEST
1. Clear all persons from a minimum 50 foot radius surrounding the goal.
2. Verify goal is attached to anchors according to instruction.
3. Apply a horizontal pull force of 247 lbs. to the center of the crossbar for 60 - 70 seconds.
Full safety precautions must be taken while performing test.
4. If goal overturns during application of force or does not return to an upright position after removing force, an
alternate anchoring system must be used
15. After installing, test as described below to verify effectiveness of anchor system. If applicable, allow concrete
to fully cure before testing.
Crossbar
247 lbs.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18

16. Attach net strap to the eyebolts in the backstays as shown. Pull net strap tight as shown. (NOTE: Do not
over tighten net strap. Over tightening may damage goal.) Excess strap can be trimmed to length.
Leave 12” to 18” of excess strap for ease of removal and re-installation. (Note: To keep end of adjustable strap
from fraying, ends can be melted after being cut.) Tie all excess strap to itself to prevent from hanging in goal
area.
Net Strap
Backstay
Clip
Eyebolt
Clip
Eyebolt
Net Strap
Pull
Backstay
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18

17. To attach net to goal, place base of net clip into channel and turn 90 degrees to lock into place.
CAUTION: DO NOT ATTEMPT TO CLIMB ON GOAL WHILE ATTACHING NET.
CAUTION: GOALS MUST BE PROPERLY ANCHORED OR STORED AT ALL TIMES.
Net
Net Clip
Net Clip
Net
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties. NZ255 Rev. 09/11/18
Go to kwikgoal.com for additional product information.

NZ235 Rev. 09/10/18
ASSEMBLY INSTRUCTIONS FOR 10B409 (WHEEL OPTION FOR
FUSION AND EUROPEAN MATCH GOALS)
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2011 Rev 2018 Kwik Goal Ltd.
Threaded Channel Spacer (4)
(Part# UZ691)
Tire and Wheel Assembly (4)
(Part# VZ349) Stop Plate (4)
(Part# UZ1254)
Mounting Bracket (4)
(Part# UZ659)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Parts

Threaded Channel
Spacer (metal)
3. If goal has been assembled with two threaded
channel spacers in each base, skip to step 7.
Continue with step 4 to install threaded channel
spacers.
NZ235 Rev. 09/10/18
Assembly Tools
9/16
9/16”, 3/4” & 15/16”
Wrenches
Ratchet with
9/16”, 3/4” & 15/16”
Sockets
AND
5/16” Hex
Wrench
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1” Hex Bolt (Part# TZ1) (8)
3/8" x 3/4" Socket Head
Capscrew (Part# TZ208) (4)
3/8“ Lock Washer (Part# TZ65) (8)
3/8“ Flat Washer (Part# TZ60) (8)
3/8” Lock Nut (Part# TZ370) (4)
1/2” Flat Washer (Part# TZ297) (4)
1/2" Lock Nut (Part# TZ28) (4)
5/8" x 3 1/2” Hex Bolt (Part# TZ369) (4)
5/8” Lock Nut (Part# TZ294) (4)
5/8” Jam Nut (Part# TZ108) (4)
Large Nylon Washer (Part# TZ204) (4)
Anti-Seize (Part# VZ327) (1)

Net Clip
Rotate 90 Degrees
and Pull Straight Out
4. Remove net clips from back bottom bar and right
and left bases. Also remove all four anchor plates.
Anchor Plate
3/8” Square Nut
NZ235 Rev. 09/10/18
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.

5. Turn goal onto posts. Remove left and right bases from posts and insert two
threaded channel spacers into each base.
6. Re-assemble bases, post braces, anchor plates and all hardware. Replace any worn or damaged hardware prior
to assembly.
Back Bottom Bar
Base
Crossbar
Post
Base
Post
Lift
Lift
Post
Base
Back Bottom Bar
3/8” Square Nuts
for anchor plates
(existing parts)
Threaded Channel
Spacers (metal)
Threaded Channel
Spacers (metal)
Unthreaded Channel
Spacer (plastic)
(existing part)
Base
Post
NZ235 Rev. 09/10/18
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.

1/2" Lock Nut
1/2" Flat Washer
Mounting
Bracket
5/8" X 3 1/2"
Hex Bolt
5/8" Jam Nut
5/8" Jam Nut
Stop Plate
5/8" Lock Nut
3/8" X 3/4" Socket Head Capscrew
3/8" Lock Nut
Tire and Wheel
Assembly
Stop Plate
Mounting
Bracket
Tighten nut until snug,
then loosen until
mounting bracket can
rotate on stop plate.
Left Side Wheel
1/2" Lock Nut
1/2" Flat Washer
Mounting
Bracket
5/8" X 3 1/2"
Hex Bolt
Stop Plate
Right Side Wheel
5/8" Lock Nut
3/8" X 3/4" Socket Head Capscrew
3/8" Lock Nut
Tire and Wheel
Stop Plate
Mounting
Bracket
7. Assemble left and right wheel assemblies as shown, except 2B3706. For 2B3706 continue to step 8.
Tighten nut until snug,
then loosen until
mounting bracket can
rotate on stop plate.
NZ235 Rev. 09/10/18
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Large Nylon Washer
Apply two small (1/4” max) drops of
anti-seize to each side of washer.
Keep anti-seize close to center hole.
Large Nylon Washer
Apply two small (1/4” max) drops of
anti-seize to each side of washer.
Keep anti-seize close to center hole.