Bison SC04WK User manual

1
P A R T S L I S T
Item Qty Description Item Qty Description
A 4 Wheel H 4 1/2” X 1 Carriage Bolt
B 4 Wheel Lever I 4 5/8” Lock Nut
C 4 Lever Bracket O 4 1/2” Lock Nut
D 4 Safety Channel P 12 1.66” Round Clamp Assembly
E 4 Hand Knob
F 4 Wing Nut
G 4 5/8” X 3” Carriage Bolt
 Inspect all contents prior to installation. Report any missing parts to dealer immediately.
 Read all instructions before proceeding.
Date: 11/02/06 Rev: 1 B.A. N.J.C. File: \drive.f\pub\sc04wkinst Ref#: 860065
Customer Service
[phone]
SC04WK
Portable Soccer Goal Wheel Kit
—— Instruction Manual ——
1. Install Lever Bracket (C) and Safety Channel (D) onto the back stay with the 1.66” Round Clamp
Assembly (P). This wheel assembly works the best when you install as close to the vertical uprights as
possible. Make sure the vertical leg of the Lever Bracket (C) is positioned to the outside of the goal and
level. See illustration on page #2.
2. Attach Wheel (A) to Wheel Lever (B) in the larger of the two square holes with the 5/8” X 3” Carriage
Bolt (G) and 5/8” Lock Nut (I). One side of the Wheel (A) has a hub that allows clearance for the Wheel
Lever (B) and you want the Lock Nut (I) on the outside of the wheel. Keep in mind that you will need a
right and left assembly, it is best to lay all of the parts out next to each upright, orient prior to assembly.
Once you have both wheels assembled onto the wheel levers you can now attach the wheel lever to the
Lever Bracket (C) with the 1/2” X 1” Carriage Bolt (H) and the 1/2 Lock Nut (O). Make sure the
Carriage Bolt is firmly seated in the square hole on the Lever. Tighten 1/2” hardware and back off 1/2
turn until the Wheel Lever (B) can rotate freely. See illustration on page #2
3. Use the Hand Knob (E) and Wing Nut (F) to lock Wheel (A) in position for transport. Once goal is
positioned for play remove Hand Knob (E) and Wing Nut (F). Rotate Wheel up and back until resting
on the playing surface away from the front of the goal. Replace Hand Knob (E) and Wing Nut (F) into
the Wheel Lever (B) for storage. See illustration on page #2.

2
Vertical Upright
EF
GI
A
B
HO
C
P
D
Back Stay