2
S1300 User Guide
Thismanualis basedonthe production versionof theKyocera
S1300phone.Software changesmayhaveoccurredafterthis
printing. Kyocera reservesthe right tomakechanges in
technical andproduct specifications without priornotice. The
products and equipment described in this documentation are
manufactured under license from QUALCOMM Incorporated
under one ormore of the following U.S. patents:
4,901,307 5,109,390 5,267,262 5,416,797 5,506,865
5,544,196 5,657,420 5,101,501 5,267,261 5,414,796
5,504,773 5,535,239 5,600,754 5,778,338 5,228,054
5,337,338 5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
The Kyocera Wireless Corp. (“KWC”) productsdescribedin
this manualmayinclude copyrighted KWCand third party
software storedin semiconductor memoriesor othermedia.
Laws in the United Statesand othercountries preserve for
KWC and third party software providerscertain exclusive
rights for copyrighted software,such as theexclusive rights to
distribute orreproduce the copyrighted software. Accordingly,
anycopyrightedsoftwarecontained in the KWCproducts may
notbe modified, reverse engineered, distributed or
reproduced in anymanner not permitted by law.
Furthermore, the purchase ofthe KWC products shall not be
deemed togrant—eitherdirectly orby implication, estoppel,or
otherwise—anylicense underthe copyrights, patents, or
patent applications of KWC orany third party software
provider,except forthe normal, non-exclusive royalty-free
license to use thatarises by operation of law in the saleof
a product.
Kyocera is a registeredtrademarkof Kyocera Corporation.
BrickAttackand Race 21 aretrademarks ofKyocera
Wireless Corp.QUALCOMM is a registered trademark of
QUALCOMMIncorporated.
Openwave is a trademarkof Openwave Systems
Incorporated. eZiText isa registered trademark of Zi
Corporation. TransFlash is atrademarkof SanDisk
Corporation.
All other trademarksare the propertyof their
respective owners.
Copyright © 2008Kyocera Wireless Corp. All rightsreserved.
RingerTones Copyright © 2000-2008 Kyocera Wireless Corp.
82-L2613-1EN, Rev. 001
FCC Notice
Thisdevice complies withpart 15 of the FCCrules. Operation
issubjectto the following two conditions: (1) This device may
not cause harmful interference, and(2)This device must
acceptany interference received, including interference that
maycause undesired operation.To maintain compliance with
FCC RFexposure guidelines, if you wear a handset onyour
body, usethe Kyocera WirelessCorp. (KWC) supplied and
approvedaccessorydesignedfor this product. Using
accessoriesthat are not supplied orapproved by KWCmay
violate FCC RF exposureguidelines.
Other accessoriesused with thisdevice forbody-worn
operations must not contain any metalliccomponents and
must provideat least 15 mm separationdistance includingthe
antenna and the user’s body.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOREXPOSURE TO RADIO WAVES.
Your wirelessphoneis a radio transmitter andreceiver. It is
designed and manufactured to not exceed the emissionlimits
for exposure to radio frequency(RF) energy set bythe
FederalCommunications Commission of the U.S.
Government. These limits are part of comprehensive
guidelinesand establish permitted levels of RFenergy for the
general population. The guidelines are based on standards
that were developed byindependent scientificorganizations
through periodic and thorough evaluationof scientific studies.
Thestandards include asubstantial safetymargin designedto
assure the safetyof all persons, regardlessof ageand health.
Theexposure standard forwireless mobile phones employs a
unit of measurement known asthe Specific Absorption Rate,
or SAR. The SARlimit setby theFCCis 1.6 W/kg.*
TestsforSAR areconductedusing standard operating
positionsspecified by the FCC with the phone transmitting at
its highest certified powerlevel in all tested frequencybands.
Although the SARis determined atthe highest certified power
level, the actualSAR level ofthe phone while operating can