La Crosse Technology 817-2410B User manual

SET UP GUIDE
MODEL: 817-2410B
PROJECTION ALARM CLOCK
with 1 AMP USB Charging and FM Radio

Power Up
2
1. Insert the 5.0 volt power adapter into an outlet, then into your clock.
Optional: Insert a CR2032 battery (not included) for backup.
2. Enter the Settings Menu to set Time.
Settings Menu
1. Hold the button to enter the Settings Menu.
2. Use the + / - buttons to adjust the values. Hold to adjust quickly.
3. Press the button to confirm and move to the next item.
5.0 V USB Cord and
power brick (included)
Optional CR2032
(not included)

Settings Menu
Settings Menu Order:
• Hour
• Minutes
• Snooze Duration (NO5) 5-60 minutes
Note: When setting the Hour, the “P” will show to indicate PM hours.
3
FM Radio
1. Extend the antenna for best reception.
2. Press the button to listen to the radio. ON will show briefly, followed
by the frequency in MHz.
3. Use the + / - buttons to select station. Hold to search for next clear
station.
4. Press to view Volume Setting. Use the + / - buttons to adjust Volume
(L1 - L16).
5. Press to turn radio o.

4
FM Radio
Auto Scan and Store Station Presets:
1. Press to listen to the radio
2. Hold to automatically scan and set up to 20 stations.
Manually Store Station Presets:
1. Press the button to listen to the radio. ON will show briefly.
2. Use the + / - buttons to select station.
3. Hold until P01 flashes. Press to store as Preset 1.
4. Repeat steps 2 and 3 to set up to 20 Station Presets.
Note: You can change preset stations with the above instructions.
Listen to Preset Stations:
1. Press the button to listen to the radio.
2. Press then the + / - buttons to select Preset Stations.
Radio Sleep Timer:
1. When the radio is on, hold , the sleep time “05” (5 minutes) will show.
2. Press repeatedly to select an option between 5 and 90 minutes.
(05, 10, 15, 30, 45, 60, 75, 90, or OFF)
3. The clock radio reverts to the time display automatically in a few
seconds. Hold to see the sleep time remaining.
4. From the normal display, press to deactivate the radio and
sleep function before the sleep time has elapsed.

Time Alarm
5
This Projection Clock has a dual time alarm function. Use the following
instructions to set your alarm times, choose your wake up sound (buzzer or
radio), and alarm volume if you choose the radio option.
Set Alarms:
1. Hold the button to enter the Alarm Settings.
2. Use the + / - buttons to adjust the values. Hold to adjust quickly.
3. Press and release the button to confirm and move to the next item.
4. Press the button anytime to save and exit.
Alarm Settings Order:
• Alarm 1 Hour
• Alarm 1 Minutes
• Alarm 1 Wake sound: bu (buzzer) or rd (Radio)
• When rd (Radio) is selected: Alarm 1 HI/LO (volume)
• Alarm 2 Hour
• Alarm 2 Minutes
• Alarm 2 Wake sound: bu (buzzer) or rd (Radio)
• When rd (Radio) is selected: Alarm 2 HI/LO (volume)

6
Activate/Deactivate Alarm 1 & 2:
1. Press the button to activate or deactivate Alarm 1 and/or Alarm 2.
2. The Amber LED Light next to the or indicates that alarm is active.
Time Alarm
Projection
Turn O Sounding Alarm:
When alarm sounds, press the button once to stop the alarm for 24
hours when alarm is sounding.
Snooze:
When an alarm is sounding, press once, the alarm will be silenced
and come on again after the custom snooze duration selected.
Note: If your second alarm activates while the first alarm is sounding, or it
is in the snooze mode, the second alarm overrides the first alarm (the first
alarm is reset to come on the next day).
Projection ON/OFF:
When first powered on the projection will turn on automatically.
1. Press the button to turn Projection O, Dim or On again.

7
Projection
Projection Image Rotation:
1. Hold the button to turn Projection 180 degrees.
2. Turn the Projection Wheel on the back of the
Projection Arm to adjust the projected image
90 degrees.
3. Rotate the Projection Arm forward or backward to
project onto the wall or ceiling.
Note: The Projection Wheel will rotate to allow you to
correctly orientate the time onto your wall or ceiling.
Projection
Wheel
• Be sure to power your clock with the included USB (5V-1.2A) Power Cord.
• Connect your external device’s USB charging cable (not included) to the
USB Charging Port.
• Charging times will vary.
• USB Power Output: 1A maximum current.
• Charge 1A devices or devices that are self- regulating.
Note: This clock was not designed to charge tablets or other devices
requiring more than a 1A current.
USB Charging

Adjustable Backlight
Select High or Low:
Press the button to select High or Low backlight. Backlight will dim but does
not turn o.
Adjust Low Brightness:
Rotate the Dimmer Wheel on the side of your clock to adjust the brightness of the
Low setting. The High setting is not adjustable.
Dimmer Wheel
to adjust Low
Backlight
Stay in Touch
Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.
Ask questions, watch setup videos, and provide feedback on our social
media outlets.
8

9
Specifications
Projection Alarm Clock (817-2410B)
Power Requirements:
5V USB Power Cord (included)
AS0601A-0501200USU USB
Optional Backup: CR2032 battery (not included)
The plug on the power adapter is intended to
serve as the disconnect device, the socket-outlet
shall be installed near the equipment and shall be
easily accessible.
Dimensions: 7.75” W x 1.97” D x 3.74” H
(19.7cm W x 5.0cm D x 9.5cm H)
USB output: 1A maximum current.
Note: The clock’s USB port is only for power output,
other USB cords cannot power the clock itself.
Maximum Alarm Duration:
Buzzer 5 minutes / Radio 1 hour
Snooze Duration: 5-60 minutes programmable
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 102521
Warranty Info
La Crosse Technology, Ltd. provides a 1-year
limited time warranty (from date of purchase) on
this product relating to manufacturing defects in
materials & workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
This product can expose you to chemicals including
styrene, which is known in the State of California to
cause cancer. For more information, go to:
www.P65Warnings.ca.gov
WARNING:
If you require additional support, get in touch with
our friendly customer support team based in
La Crosse, WI.
Our knowledgable customer support team is
available Mon-Fri: 8am-6pm CST
Phone: [phone]
Email: bit.ly/contact_techsupport
Self-Help: bit.ly/817-2410b_support
We’re Here to Help

Battery replacement instruction:
When batteries of dierent brand or type are used
together, or new and old batteries are used together,
some batteries may be over-discharged due to a dier-
ence of voltage or capacity. This can result in venting,
leakage, and rupture and may cause personal injury.
• Always purchase the correct size and grade of battery
most suitable for the intended use.
• Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
dierent types.
• Clean the battery contacts and those of the device
prior to battery installation.
• Ensure the batteries are installed correctly with regard
to polarity (+ and -).
• Remove batteries from product during periods of non-
use. Battery leakage can cause corrosion and damage
to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect
the environment please check the internet or your local
phone directory for local recycling centers and/ or
follow local government regulations.
Replace the Coin Cell Battery
1. Use a coin to turn the battery cover to the left to
remove it.
2. Pull back the metal pin and gently remove thebattery.
3. Insert a fresh CR2032 battery with the + side up and
snap into place.
4. Replace the battery cover and use the coin to turn it
to the right to lock.
Swallowing may lead to serious injury in as little
as 2 hours or death, due to chemical burns and
potential perforationof the esophagus.
If you suspect your child has swallowed or
inserted a button battery, immediately seek urgent
medical assistance.
Examine devices and make sure the battery
compartment is correctly secured, e.g. that the
screw or other mechanical fastener is tightened.
Do not use if compartment is not secure.
Dispose of used button batteries immediately and
safely.
Flat batteries can still be dangerous.
Tell others about the risk associated with button
batteries and how to keep their children safe.
1.
2.
3.
4.
5.
6.
WARNING:
KEEP BATTERIES OUT OF REACH OF CHILDREN
This product contains a button battery.
If swallowed, it could cause severe injury or death
in just 2 hours.
Seek medical attention immediately.
1.
2.
3.
WARNING
Care & Maintenance Warnings
10

11
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints.
The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.
FCC Statement
Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement8