La Crosse Technology W85923 Operating and maintenance manual

Model: W85923
Instructional Manual
DC: 101615
Projection Alarm Clock
Table of Contents
Welcome ............................................................................
Get Started ........................................................................
LCD Features ......................................................................
Button Functions .................................................................
Set Time ............................................................................
Set Alarm ..........................................................................
Arm/Disarm Alarm ..............................................................
Snooze ..............................................................................
Set Year, Month, Date ..........................................................
Fahrenheit/Celsius ...............................................................
MIN/MAX Temperature .........................................................
Projection ..........................................................................
Backlight ...........................................................................
Reset Button ......................................................................
Care and Maintenance .........................................................
Warranty and Support .........................................................
Specifications .....................................................................
FCC Statement ...................................................................
Canada Statement .............................................................. 7
6
6
6
5
5
5
4
4
3
3
3
3
2
2
7
1
1
1
DAY MONTH
DATE

Welcome!
Thank you for purchasing the Projection Alarm Clock, designed for
years of trouble-free performance.
Get Started
1. Insert the 4.5V adapter into the outlet, than into the clock.
2. (Optional): Insert two fresh AAA batteries into the clock.
LCD Features
DAY MONTH DATETEMPERATURE
1 2
3
4
567 8
5
6
7
8
1
2
3
4
Alarm Bell
Date
Month
Weekday
Indoor Temperature
Temperature Icon
AM/PM Indicator (12 hour)
Time
W85923 www.lacrossetechnology.com/support Page | 1
+AAA -
-AAA +
Focus Wheel

Button Functions
MODE Button
RESET Button
UP Button MAX/MIN Button
SET Button
DOWN Button
Normal Time Display:
• Press and release to toggle
Time, Alarm, and Calendar
setting modes
Time Mode, Alarm Mode,
Calendar Mode:
• Hold 3 seconds to set selected
mode
• Press and release to select
• Fahrenheit or Celsius display of
temperature
Time Set, Alarm Set,
Calendar Set:
• Press and release to adjust
value
• Hold to adjust quickly
Alarm Mode:
• Press and release to turn alarm
ON/OFF
Time Set, Alarm Set,
Calendar Set:
• Press and release to adjust
value
• Hold to adjust quickly
Normal Time Display:
• Press and release to toggle
MIN, MAX and Current
temperature
Normal Time Display:
• Press and release to reset clock
Set Time
1. Press the MODE button if you are not in Time mode.
2. Hold the SET button to enter Time Set.
UP or DOWN buttons to select 24 hr time.
4. Press the SET
UP or DOWN buttons to adjust.
6. Press SET
UP or DOWN buttons to adjust.
8. Press the MODE button to exit.
12/24 Hour Time Set Hour Set Minutes
DAY MONTH DATETEMPERATURE DAY MONTH DATETEMPERATURE DAY MONTH DATETEMPERA TURE
Page | 2 www.lacrossetechnology.com/support W85923

Set Alarm
TEMPERATURE
Setting alarm time and arming the alarm are separate steps.
1. Press the MODE button to view Alarm mode.
2. “AL” will show below time
3. Hold the
4
6
SET button to enter Alarm Set.
UP or DOWN buttons to adjust.
5. Press SET
UP or DOWN buttons to adjust.
7. Press the MODE button to exit
TEMPERATURE
Set Year, Month, Date
1. Press and release the MODE button to view Calendar mode.
2. The Year will show.
3. Hold the SET button to set the year.
UP or DOWN buttons to adjust.
5. Press SET
UP or DOWN buttons to adjust.
7. Press SET
UP or DOWN buttons to adjust.
9. Press the MODE button to exit
Arm/Disarm Alarm
Snooze
1. Press the MODE button to view Alarm mode.
2. “AL” will show below time
3. Press the UP to arm or disarm the alarm.
• The alarm bell icon will appear when the alarm is armed.
• The alarm bell icon will disappear when the alarm is off.
• When the alarm sounds, press the SNOOZE/LIGHT button to trigger
snooze alarm for 4 minutes.
• The snooze icon Zz
• Press any button to turn off the snooze feature when the snooze
alarm sounds. The snooze icon will disappear.
W85923 www.lacrossetechnology.com/support Page | 3

Set Year Set Month Set Date
DAY MONTH DATETEMPERATURE DAY MONTH DATETEMPERATURE DAY MONTH DATETEMPERATURE
Fahrenheit/Celsius
• With time showing, press and release the SET button to switch
between Fahrenheit or Celsius temperature display.
DAY MONTH DATETEMPERATURE
MIN/MAX Temperature
DAY MONTH DATETEMPERATURE
• With time showing, press and release the MIN/MAX button to view
minimum, then maximum temperature.
Reset:
1. Press and release the MIN/MAX button to view minimum
temperature.
2. Hold the DOWN button to reset to current temperature.
3. Dashes will show for 5 seconds.
• Repeat steps 1-3 to reset maximum temperature.
Note: Weekday will set automatically when year, month and date
are set. If weekday is incorrect, check the year setting.
DAY MONTH DATETEMPERATURE
MAX
MIN
DAY MONTH DATETEMPERATURE
Page | 4 www.lacrossetechnology.com/support W85923

Projection
Projection is best viewed on the ceiling or on a wall behind the clock.
• Projection Arm: The projection arm will rotate to project time on
the wall or ceiling.
• Focus Wheel: Adjust projection focus by turning the wheel on the
back of the projection arm.
• Time will project constantly when operating with the power adapter.
• Alarm time will project for 1 minute when in alarm mode, then will
default to time projection.
• The year will project for 1 minute when in calendar mode, then will
default to time projection.
• Battery Operation: Press the SNOOZE/LIGHT button for a
3 second projection and backlight.
Note: The projection image itself, does not rotate.
TIME ALARM YEAR
Backlight
• Operating with power adapter: Backlight and projection are on
constantly.
• Batteries only: Press the SNOOZE/LIGHT button for a 3 second
backlight and projection.
Reset Button
• If the clock display appears distorted or is not responding to buttons,
use a pen or paper clip to press and release the RESET button one
time.
• This will reset the clock to default settings.
W85923 www.lacrossetechnology.com/support Page | 5

• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity (+ and - ).
• Remove batteries from equipment which is not to be used for an
extended period of time.
• Remove expired batteries promptly.
Care and Maintenance
Specications
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support with
questions or visit our online help:
Phone: [phone]
Online Product Support:
www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
Warranty Address:
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
Page | 6 www.lacrossetechnology.com/support W85923
Temperature Range: +32 °F to +122°F (0°C to 50°C)
Power: 4.5-volt a/c power adapter (included)
AC #: GPU280450150WD00
Optional: 2-AAA, IEC, LR3 batteries (not included)
Battery Life: Battery life is over 24 months when using the AC
adapter for primary power
Dimensions: 5.91” L x 2.17” W x 4.33” H (150 x 55 x 110 mm)

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized changes or modications to this equipment. Such changes or
modications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part,
or duplicated or processed using electronic, mechanical or chemical process
without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is
regularly checked and corrections are included in subsequent editions. We disclaim
any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Canada Statement
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
FCC Statement
W85923 www.lacrossetechnology.com/support Page | 8