La Crosse Technology WT-3122A User manual

12.5 Inch Atomic Wall Clock
Model: WT-3122A
DC: 052518
For information about WWVB, atomic time signal visit:
http://bit.ly/AtomicTime
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior
to battery installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from your clock when it is not used for an
extended period of time.
• Promptly remove an expired battery.
CARE AND MAINTENANCE
Battery Requirements: 1 AA (IEC LR6) required in movement
(Alkaline recommended)
Battery life: 1 battery; over 12 months
SPECIFICATIONS
La Crosse Technology, Ltd. provides a 1-year limited time
warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly
customer support with questions or visit our online help.
Phone: [phone]
Online: www.lacrossetechnology.com/support/
WARRANTY AND SUPPORT
Page | 1Page | 4
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: https://www.p65warnings.ca.gov/

POWER UP
1. Select Time Zone and DST ON or OFF.
2. Insert 1 AA battery into your clock.
3. For best reception, place your clock on a wall that faces
Ft. Collins, Colorado. During the night, your clock will set itself.
IMPORTANT:
• Hands will move to 12:00 and search for the atomic time
signal.
• After 8-10 minutes if no atomic time signal is received, the
clock will start running from 12:00.
• Your clock will continue to search for the WWVB atomic time
signal.
• Allow up to 5 nights for the clock to receive the atomic time
signal.
6
5
SET
RESET
WAVE (Atomic search)
Battery
Time Zone Selector
Daylight Saving Time
Selector
Set Time:
1. Hold SET for 3 seconds
2. Press and Hold SET to move hands quickly.
3. Press and release SET to move hands forward step by step.
Reset:
If the clock does not respond when trying to manually set your
time, press the RESET button on the movement case.
4
3
2
1
6
5
4
3
2
1
MANUALLY SET TIME
• In certain areas, your clock may not be able to receive
the atomic time signal due to signal strength or interference.
• In this case, your clock can be set manually and operate as
a quartz clock until the WWVB signal can be received.
Note: The atomic time signal will override manual settings.
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.
LET’S BE SOCIAL!
Page | 3Page | 2

POWER UP
1. Select Time Zone and DST ON or OFF.
2. Insert 1 AA battery into your clock.
3. For best reception, place your clock on a wall that faces
Ft. Collins, Colorado. During the night, your clock will set itself.
IMPORTANT:
• Hands will move to 12:00 and search for the atomic time
signal.
• After 8-10 minutes if no atomic time signal is received, the
clock will start running from 12:00.
• Your clock will continue to search for the WWVB atomic time
signal.
• Allow up to 5 nights for the clock to receive the atomic time
signal.
6
5
SET
RESET
WAVE (Atomic search)
Battery
Time Zone Selector
Daylight Saving Time
Selector
Set Time:
1. Hold SET for 3 seconds
2. Press and Hold SET to move hands quickly.
3. Press and release SET to move hands forward step by step.
Reset:
If the clock does not respond when trying to manually set your
time, press the RESET button on the movement case.
4
3
2
1
6
5
4
3
2
1
MANUALLY SET TIME
• In certain areas, your clock may not be able to receive
the atomic time signal due to signal strength or interference.
• In this case, your clock can be set manually and operate as
a quartz clock until the WWVB signal can be received.
Note: The atomic time signal will override manual settings.
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.
LET’S BE SOCIAL!
Page | 3Page | 2

12.5 Inch Atomic Wall Clock
Model: WT-3122A
DC: 052518
For information about WWVB, atomic time signal visit:
http://bit.ly/AtomicTime
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior
to battery installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from your clock when it is not used for an
extended period of time.
• Promptly remove an expired battery.
CARE AND MAINTENANCE
Battery Requirements: 1 AA (IEC LR6) required in movement
(Alkaline recommended)
Battery life: 1 battery; over 12 months
SPECIFICATIONS
La Crosse Technology, Ltd. provides a 1-year limited time
warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly
customer support with questions or visit our online help.
Phone: [phone]
Online: www.lacrossetechnology.com/support/
WARRANTY AND SUPPORT
Page | 1Page | 4
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: https://www.p65warnings.ca.gov/