La Crosse Technology 308-1711BLV2 User manual

SET UP GUIDE
MODEL: 308-1711BLv2
WIRELESS
WEATHER STATION

1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert 2-AA batteries Into your Weather Station
3. Enter the Settings Menu to adjust your time and date.
4. Once the sensor is reading to your clock, place the senor outside in a
shaded location. View our sensor mounting video here:
bit.ly/th_sensor_mounting
2
POWER UP
Weather
Station
308-1711BLv2
AA
AA
Outdoor Sensor
TX141TH-Bv3
AA
AA
SETTINGS MENU
1. Hold the SETTINGS button to enter the Settings Menu.
2. Use the -/LOW or +/HIGH button to adjust values.
3. Press the SETTINGS button to confirm and move to the next
item in the Settings Menu.

Settings Menu Order:
• Year
• Month
• Date
• 12/24 Hour Time
• Hour
• Minutes
• Fahrenheit/Celsius
• Weekday: Your weekday display will adjust automatically once you
have your Year, Month, and Date settings set correctly.
3
Setting and activating time alarms are separate
actions.
Set Alarm:
1.Hold the TIME ALARM button until the the
display changes to Alarm Settings.
2.Press and release -/LOW or +/HIGH button
to adjust the values. Hold to adjust quickly.
3.Press and release the TIME ALARM button to
confirm and move to the next item or exit.
TIME ALARM

4
• Press the TIME ALARM button once to view alarm time.
• Press the TIME ALARM button again to activate the alarm. Once
activated, the Alarm Icon appears.
• Press the TIME ALARM button again to deactivate the alarm. The Alarm
Icon will disappear.
ACTIVATE/DEACTIVATE ALARM
SNOOZE ALARM
• When alarm sounds, press the SNOOZE button to silence the alarm for 10
minutes. The Alarm Icon will flash.
• In snooze mode, press any button except SNOOZE to stop alarm for one
day.
Note: The alarm will sound with increasing frequency for two minutes,
then shut off automatically if not silenced.
Set Alerts:
1. Hold the TEMP ALERTS button to enter Alert Settings.
2. Use the -/LOW or +/HIGH button to adjust, and the TEMP ALERTS
button to confirm and move to the next alert.
TEMPERATURE ALERTS

5
Arm/Disarm Alerts:
• Press the TEMP ALERTS button to select an alert.
• Press the +/HIGH button to arm temperature alerts.
• Press the -/LOW button to disarm temperature alerts.
Sounding Alerts:
• When a temperature enters an alert range, the corresponding
Alert Icon will flash, and the station will ring for five seconds
every minute, until the temperature moves out of the alert range.
• Press any button to stop the sounding alert. The Alert Icon will
continue to flash.
OUTDOOR HIGH OUTDOOR LOW INDOOR HIGH INDOOR LOW
All MIN/MAX temperature/humidity records will reset automatically at 12:00
(midnight).
• Press and release the -/LOW button to view indoor/outdoor minimum
readings.
• Press and release the +/HIGH button to view indoor/outdoor maximum
readings.
MIN/MAX (HIGH/LOW) TEMPERATURE RECORDS

TEMPERATURE TREND ARROWS
6
Both the Indoor and Outdoor Temperature values have Trend Arrows to
indicate changes (2°F/1°C or more) over the past one hour period.
Temperature has risen over the past hour.
Temperature has been steady over the past hour.
Temperature has fallen over the past hour.
The Moon Phase is based on the lunar calendar, and therefore is controlled by the
time and date set on your weather station.
New Moon Small Waxing
Crescent
Large Waxing
Crescent
First Quarter Small Waxing
Gibbous
Large Waxing
Gibbous
Small Waning
Crescent
Large Waning
Gibbous
Small Waning
Gibbous
Last Quarter Large Waning
Crescent
Full Moon
HEAT INDEX / DEW POINT
MOON PHASE
• Press the HEAT/DEW button once to view remote Heat Index.
• Press the HEAT/DEW button twice to view remote Dew Point.

SENSOR WEATHER SHIELD
• The Sensor Weather Shield (sold separately) is designed to
protect your outdoor sensor from rain and snow.
• This shield will oer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/925-1418
7
SEARCH FOR OUTDOOR SENSOR
If you are seeing dashes for your outdoor readings, please try the
following steps:
1. Hold the SEARCH button to search for your outdoor sensor. The
Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside
next to the display and remove power from both the sensor and clock.
3. Press any button on the clock 20 times and leave the parts sit for a few
moments with the power o.
4. Install a new set of alkaline batteries into the sensor, then into your clock.
For additional help visit: bit.ly/basic_restart
5. If your outdoor data is still not appearing after these steps, please
contact our support sta via the links below.

8
WE’RE HERE TO HELP
Still have questions? Use the links below to find
additional resources or reach out to our sta directly.
Self-Help: bit.ly/308-1711blv2_support
Online Support: bit.ly/contact_techsupport
Phone: [phone]
Our friendly support team based in La Crosse, WI is
available Mon-Fri, 9am-6pm CST.
WARRANTY & PATENTS
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on
this product relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patent
Ask questions, watch setup videos, and provide feedback on our social
media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook
and Instagram.
STAY IN TOUCH!

9
Weather Station (308-1711BLv2)
Temperature Range:
32°F to 122°F (0°C to 50°C)
Humidity Range:
10% to 99% RH
Power Requirements:
2-AA, IEC, LR6 batteries (not included)
Dimensions: 5.40” L x 1.68” W x 4.40” H
(3.72 cm L x 4.28 cm W x 11.18 cm H)
Outdoor Sensor (TX141TH-Bv3)
Temperature Range:
-40°F to 140°F (-40°C to 60°C)
Humidity Range:
10% to 99% RH
Transmission Range:
Over 330 ft. open air
(100 meters) RF 433MHz
Update Interval:
About every 51 seconds
Power:
2-AA, IEC, LR6 batteries (not included)
Battery Life:
Over 12 months
Dimensions: 1.57” L x 0.79” W x 5.12” H
(4.0cm L x 2.0cm W x 13.0 H cm)
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 071222
SPECIFICATIONS CARE AND MAINTENANCE
When batteries of dierent brand or type are used
together, or new and old batteries are used together,
some batteries may be over-discharged due to a
dierence of voltage or capacity. This can result
in venting, leakage, and rupture and may cause
personal injury.
•Do not mix Alkaline, Lithium, standard, or
rechargeable battteries.
•Always purchase the correct size and grade of
battery most suitable for the intended use.
•Always replace the whole set of batteries at one
time, taking care not to mix old and new ones, or
batteries of dierent types.
•Clean the battery contacts and also those of the
device prior to battery installation.
•Ensure the batteries are installed correctly with
regard to polarity (+ and -).
•Remove batteries from product during periods of
non-use. Battery leakage can cause corrosion and
damage to this product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and
to protect the environment, please check the
internet or your local phone directory for local
recycling centers and/or follow local government
regulations.

10
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Caution!
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
FCC STATEMENT CALIFORNIA RESIDENTS
This product can expose you to chemicals
including acrylonitrile, butadiene, and styrene,
which are known to the State of California
to cause cancer and birth defects or other
reproductive harm. For more information, go
to: www.P65Warnings.ca.gov
CA WARNING:
All rights reserved. This manual may not
be reproduced in any form, even in part, or
duplicated or processed using electronic,
mechanical or chemical process without the
written permission of the publisher.
This booklet may contain errors or misprints.
The information it contains is regularly
checked and corrections are included
in subsequent editions. We disclaim any
responsibility for any technical error or printing
error, or their consequences.
All trademarks and patents are recognized.