La Crosse Technology V10v2 User manual

SET UP GUIDE
MODEL NUMBER V10v2
Wi-Fi COLOR FORECAST
STATION

Table of Contents
BASICS LA CROSSE VIEW
FORECAST PRESSURE
Initial Setup
Station Settings
Buttons
LCD Display Brightness
Auto-Dim Settings
Viewing Time/Calendar
Connecting to the App
Connecting Your Station
Adding Your Sensor to
the App
Manually Add Sensor to
the App
Viewing Your Forecast Data
Seasonal Trees
Standalone Forecast Icons
Enhanced Forecast Data
Daily/Hourly Forecast
Relative Pressure
02
Initial Setup
Power Up
02
06
07
08
08
09-10
TEMP. AND HUMIDITY
Viewing Your TH Data
Viewing TH Records
Outdoor Comfort Meter
Temp. & Humidity Alerts
09-11
11
11
12
APPENDIX
Specifications
Cautions/Statements
Warranty
Recycling & Disposal
18
18-21
19
19
03
04
05
06
13
13
14
14
15
16
SENSORS
Placement & Mounting
Add-On Sensors
Adding Extra Sensors
16
17
17
Note: It may take up to 10 minutes for your sensor data to appear on your
station’s screen.
BASICS
Weather Station
Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the back
of the station. Next, remove the Insulation Tab from the Station’s Battery Compartment.
Thermo-Hygro Sensor
Install 2 fresh “AA” batteries according to polarity and replace battery cover. The blue LED light
will flash when transmitting.
SUPPORT
We’re Here to Help
Factory Reset
Stay in Touch
21
21
21
APPENDIX
FCC Statement
Canada Statement
20
20
Weather Station (V10v2) Thermo-Hygro Sensor (LTV-TH2i)

03 04
Connecting to the App
LA CROSSE VIEW
Download the La Crosse View App
Visit the App Store or Google Play Store to download the free
La Crosse View app onto your mobile device.
Stay connected to your home anytime, anywhere with the
La Crosse View app.
Monitor your home environment and set custom alerts to
notify you when conditions change.
Connecting your station is optional and the display will
function as a standalone unit without the Wi-Fi connection.
However, we recommend connecting during the initial
setup, as it will save you time and allows access to some
advanced features right away.
Launch the App
Connecting Your Station to the App
Open the La Crosse View app. Follow the on-screen setup instructions
to create an account, add new devices, and connect your station to
your Wi-Fi network.
Stay Connected to Your Home
Anytime, Anywhere.
Now that you’ve created your La Crosse View account, it’s time to add your station into your account
and connect your station to your home router using the La Crosse View app.
NOTE: For the steps listed on the next page, you’ll need your Wi-Fi network name (SSID) and password.
Make sure your mobile device is connected to the same Wi-Fi network.
Adding & Connecting Your Station to Wi-Fi
LA CROSSE VIEW
Checking Your Station’s Wi-Fi Status
Press the SET button on the top of the station to view your Wi-Fi Status.
Having Trouble Connecting to Wi-Fi?
The app should guide you through the best method for your Wi-Fi network and router.
However, if you have trouble connecting, please go to: bit.ly_v10v2_wifi or scan the
QR code. This will explain additional connectivity options, including connecting by
WPS or contacting our technical support team for further assistance.
ALL OK CONNECTED: Your station is connected to your
Wi-Fi and its data should be available on the station and in
the app.
SEE APP TO CONNECT: Check the app for notifications.
NO WEATHER SERVICE: Your Internet weather and time
services are not connecting. These should resolve on their
own, please be patient.
LOST WIFI: Check your router and network connections.
The La Crosse View app is required to connect the station to your Wi-Fi network. Download, install,
and log into your La Crosse View account first.
New User Initial Setup: When first setting up
your station, the app will lead you through a
series of instructions to help get your station
added into your account and connected to
your home Wi-Fi network.
Manually Add & Connect Display: After the
initial walk-through, stations can be added and
connected via the Devices tab in the app’s main
menu. Simply tap the Add Device or +button at
the bottom of the Devices page in the app.
1.
Follow the initial app instructions or manually add the display into your account.2.
Next, the app will prompt you to use your phone to scan the device ID barcode located on the back of
the station. Please note, adding a device to your account and connecting it to Wi-Fi are two dierent
steps. You can complete either step separately after if you have any trouble.
When connected, the station will beep, and time and forecast information should populate on the
display. The indicator will become solid.
3.
4.

123456-ABC
05 06
BASICS
Station Settings
* This step is only required if you do not receive the Add Device notification within the app.
Prior to mounting/positioning your sensors, make sure your station is receiving sensor data.
Adding Your Sensors to the App
LA CROSSE VIEW
Upon getting the station connected to your Wi-Fi network, the app will
explain how your connected sensor should be brought in. Within the
next 15 minutes, you should receive an Add Device notification in your
app. This is indicated by the Red Cloud and the numbers inside of it.
Tap this icon to begin adding your sensors into the app.
1.
Manually Add Sensors Into the App*
3.
4.
2.
Open your La Crosse View app. On the Main Menu, scroll to
ADD/EDIT and select DEVICES.
Scan the Barcode on your Sensor or type in the Device ID
manually.
Confirm the sensor image and Device ID and add a Device
Name and Location Name. Select DONE.
On the Devices page, select the ADD DEVICE or PLUS (+) button.
123456-ABC
Back of Sensor
Settings Menu Order
• Greeting/HELLO
• Language (English/Spanish/French)
• Beep ON/OFF
• 12/24 Hour Time Format
• Hour | Minute | Year | Month | Date
• Calendar Order Month/Date or Date/Month
• Temperature Units (Fahrenheit/Celsius)
• Pressure Units (InHg/hPa)
• Pressure Number Setting
The default pressure reading is 29.91 INHg (1013 hPa).
The station will acclimate on it’s own if the pressure
number is not set. Learn more on page 16
• THANK YOU
Important: Settings such as language and units of measure must
be set manually within the station’s Settings Menu. These are not
controlled by the La Crosse View app.
When a language is selected, the following instructions and
weekday will be presented in that language.
Weekday will set automatically after year, month, and date
settings are adjusted.
When in 24 hour time format, seconds will show in place of
AM/PM markings.
If you’re connected to Wi-Fi, the time/date will automatically
update from the Internet. See pages 3-4 for more info.
When the station is first powered on, it will begin searching for your sensors,
which should connect within 10 minutes.
Navigating the Settings Menu
To manually set language, time/date, and
other settings, hold the SET button to
enter the Settings Menu.
1.
Use the +/- buttons on the top of the
station to adjust the values.
2.
Press the SET button to confirm your
selection and move to the next setting.
3.
You may exit the Settings Menu at any
time by pressing the LIGHT button.
4.

07 08
Buttons
Back of Station
* Your display must be connected to Wi-Fi to receive Hourly/Daily forecast information.
LCD Display Brightness
The icon will appear on the LCD when the Auto-Dim feature is activated.
BASICSBASICS
Please Note: Only the hour can be set.
Auto-Dim Settings
Program your display to automatically dim during preselected times.
1. Hold the LIGHT button to enter
the Auto-Dim Settings Menu.
2. Press the +/- buttons to turn the
Auto-Dim feature on or o. Press
LIGHT to confirm.
3. Press the +/- buttons to adjust
the starting hour. Press LIGHT to
confirm.
4. Press the +/- buttons to adjust the
stopping hour. Press LIGHT to
confirm and exit.
Adjusting the LCD Display Brightness
Press the LIGHT button on the top of the station to
adjust the backlight intensity. There are 4 brightness
levels, plus an o option.
3. EXTRA SENSOR
Press to toggle through extra
sensors and pressure. Hold to
add sensors. While viewing,
hold the MINUS button to
delete the sensor.
1. LIGHT
Press to adjust backlight. Hold
to enter Auto-Dim settings.
2. TEMP. INFO
Press to view Temperature
and Humidity History. While
viewing, hold MINUS button
to delete the history reading.
4. SET
Press to view Wi-Fi status.
Hold to enter Settings Menu.
5. PLUS/MINUS (+/-)
Use to adjust values. In Alert
Settings, press to turn Alert(s)
on/o. Hold both together to
search for Wi-Fi signal.
6. ALERTS
Hold to enter Alert Settings.
While in Alert Settings, press
to move to next Alert.
9. WIFI
Press during initial setup for
Wi-Fi Connection. Hold to
re-enter Configuration Mode &
clear previous Wi-Fi settings.
7. HOURLY FORECAST
Press to see Hourly Forecast*
8. DAILY FORECAST
Press to see Daily Forecast*

09 10
Viewing Time, Calendar, Temperature, & Humidity Viewing Time, Calendar, Temperature, & Humidity
BASICS BASICS
1. DAY OF THE WEEK
Select from English, Spanish,
or French in the Settings Menu
7. LOW BATTERY ICON
FOR SENSOR
Indicates sensor battery needs
to be replaced
4. 12/24 HOUR TIME
Time will automatically update
when connected to Wi-Fi
10.SENSOR RECEPTION
INDICATOR
Indicates if the station is
receiving data from the sensor
13.OUTDOOR
COMFORT METER
Represents current outdoor
comfort level
2. WI-FI ICON: Indicates active
Wi-Fi connection*
8. HIGH/LOW OUTDOOR
TEMP. ALERT ICONS:
Appears if high ( ) or low ( )
alert(s) are set and active
5. LOW BATTERY ICON
FOR STATION
Appears when station battery
needs to be replaced
11. DAILY FORECASTED HIGH
AND LOW TEMPERATURES
Forecasted high and low
temperatures in the next 12
hours*
3. AUTO-DIM ICON: Indicates
active Auto-Dim setting
9. OUTDOOR TEMPERATURE
Current outdoor temperature
(°F/°C)
17. INDOOR TEMPERATURE
Current indoor temperature
(°F/°C)
6. CALENDAR: Select order
(Month/Date or Date/Month)
in the Settings Menu
12.OUTDOOR HUMIDITY
Current outdoor relative
humidity (%RH)
18.INDOOR HUMIDITY
Current indoor relative
humidity (%RH)
TIME & CALENDAR
TEMPERATURE & HUMIDITY
14.HIGH/LOW OUTDOOR
HUMIDITY ALERT ICONS
Appears if high ( ) or low ( )
alert(s) are set and active
15.HIGH/LOW INDOOR
TEMP. ALERT ICONS
Appears if high ( ) or low ( )
alert(s) are set and active
16.HIGH/LOW INDOOR
HUMIDITY ALERT ICONS
Appears if high ( ) or low ( )
alert(s) are set and active
*Your display must be connected to Wi-Fi to receive AccuWeather forecast data.

11 1211
Viewing Your Temperature and Humidity Data
TEMPERATURE & HUMIDITY
Outdoor Comfort Meter
The arrow indicates outdoor comfort level based on current relative humidity.
Temperature and Humidity Alerts
TEMPERATURE & HUMIDITY
1%RH to 25%RH 26%RH to 39%RH 40%RH to 75%RH 76%RH to 83%RH 84%RH to 99%RH
Viewing Records
Press the TEMP. INFO button to toggle
through indoor/outdoor temperature and
humidity records with time and date stamps.
Resetting Individual Temperature and
Humidity Records
Records Viewing Order
Press the TEMP. INFO button to view the individual
temperature & humidity values you’d like to reset.
Hold the MINUS (-) button until dashes appear.
This will reset the value to your current temperature
or humidity reading.
•Outdoor High Temperature
•Outdoor Low Temperature
•Outdoor High Humidity
•Outdoor Low Humidity
•Indoor High Temperature
•Indoor Low Temperature
•Indoor High Humidity
•Indoor Low Humidity
•Heat Index
•Dew Point
1.
2.
3.
Hold the ALERTS button to enter the
Alert Settings Menu.
Use the +/- buttons to activate/deactivate
individual alerts, or press the ALERTS
button to skip to the next alert option.
Once activated, use the +/- buttons to
adjust the alert value. Press the ALERTS
button to confirm and move forward.
Active alerts are indicated by the and /
icons in the respective sections on screen.
Note: The default setting for alerts is OFF.
Setting Temperature and Humidity Alerts
Alerts Setting Order
Alert Sounds
Outdoor High Temp. •Outdoor Low Temp. •Outdoor High Humidity •Outdoor Low Humidity
Indoor High Temp. •Indoor Low Temp. •Indoor High Humidity •Indoor Low Humidity
•When an alert value is reached, the respective alert icon will flash and the station will beep
5 times each minute until the value moves out of the alert range.
•Press any button to stop the alert sound. The alert icon will continue to flash until out of
the alert range.
High Temperature Alert Example
Note: Alerts set on the station are separate from those created within the La Crosse View app.

13 14
Viewing Your Forecast Data
2. CHANCE OF PRECIPITATION
Predicts upcoming chance of precipitation*
3. DAILY FORECASTED HIGH TEMPERATURE
Upcoming forecasted high temperature*
5. FORECAST ICONS
Predicts upcoming weather conditions**
4. DAILY FORECASTED LOW TEMPERATURE
Upcoming forecasted low temperature*
6. SEASONAL TREES
Foliage scene changes seasonally
1. INTERNET ICON
Indicates the station is connected and receiving
AccuWeather forecasts*
Spring (March 20th to June 20th)
Fall (Sept. 21st to Dec. 20th)
Summer (June 21st to Sept. 20th)
Winter (Dec. 21st to March 19th)
Seasonal Trees
The foliage scene in the
forecast section changes
seasonally. The dates are
pre-programmed.
*Your display must be connected to Wi-Fi to receive AccuWeather forecast data.
**When connected, your station will display 6 additional forecast icons.
FORECAST
Viewing Your Forecast Data
FORECAST
Forecast Icons
Please Note: The Forecast Icons may not represent
your current weather. They are a future prediction of
the weather to come over the next 12 hours.
When using as a standalone station, the display
will use changes in barometric pressure to predict
your weather to come in the next 12 hours. This is
represented by 6 forecast scenes (sunny, partly
sunny, clouds, rain, t-storm, and snow).
When connected to Wi-Fi, the station will receive additional weather icons, chance of precipitation values,
and future forecast information. These enhanced Internet features are powered by AccuWeather.
Additional forecast scenes include:
Tip: The icon will appear in the top left corner of the forecast section when your display is connected and
receiving AccuWeather forecasts.
Sunny
Rain
Sunny
Light Snow
Light Rain
Windy
Partly Sunny
T-Storm
Partly Sunny
Snow
Rain
Ice
Clouds
Snow
Clouds
Wintry Mix
T-Storm
Fog

15
Viewing Your Forecast Data
FORECAST
Day/Night Forecast
When connected to Wi-Fi, the sun icon appears in daylight hours and the moon icon appears
during nighttime hours if the forecast is for sunny or partly sunny.
•The times the sun and moon icons appear are
pre-programmed and cannot be adjusted.
•The station must be connected Wi-Fi to activate
the day/night forecast feature.
Sun (7:00am to 7:00pm) Moon (7:00pm to 7:00am) 16
Relative Pressure
Sensor Placement & Mounting
•Your Relative Pressure reading will come
from your station’s internal barometer.
•Please allow up to 10 days for automatic
calibration, or program your local pressure
value in the Settings Menu.
•The arrows located to the left of the values
represents Pressure Tendency ( / ).
•Select your desired unit of measurement
(hPa or InHg) in the Settings Menu. You can
also set a specific pressure number setting
if desired.
PRESSURE
SENSORS
Note: The default pressure reading is 1013 hPa (29.91 InHg).
The station will acclimate on it’s own if the pressure number
is not set.
Daily and Hourly Forecast Buttons
When connected to Wi-Fi, use the DAILY FORECAST and HOURLY FORECAST
buttons on the top of the station to view future forecast information.
Daily Forecast
•Hold the DAILY FORECAST button to scroll
through 7 days of future forecasts. When scrolling,
press the DAILY FORECAST button to stop the
scroll and return to main display.
•Press and release the DAILY FORECAST button
to view each day individually.
•Hold the HOURLY FORECAST button to scroll
through 12 hours of future forecasts. When scrolling,
press the HOURLY FORECAST button to stop the
scroll and return to main display.
•Press and release the HOURLY FORECAST button
to view each hour individually.
Hourly Forecast
• Use the hole at the top to hang your sensor from the back using a
nail. Or, insert one mounting screw through the front of your sensor.
• Mount your sensor on a north-facing wall or in any shaded area.
Under an eave or deck rail is preferred to avoid inaccurate readings
from the sun.
• The maximum wireless transmission range to the station is up to
400 feet (121 meters) in open air, not including walls or floors.
• Be sure your sensor is mounted vertically, to allow moisture to
drain out properly.

17
SENSORS
18
Add-On Sensors
Whether you choose to connect to the La Crosse
View app or not, this station can display data for up
to 4 extra sensors. This data will appear in the red
section on the LCD and in your La Crosse View app
if connected.
Note: When first powering up, or after a factory reset,
extra sensors should automatically connect to your station.
2. Install batteries into your sensor. If the sensor
has a TX button, press it to force a transmission
signal. This button is usually located in or near
the sensor’s battery compartment. The LED light
on the sensor will flash once.
3. Your sensor should connect within the next 3
minutes, briefly displaying its ID and type on the
LCD. The Sensor Reception Indicator will show
solid on the screen when a sensor is connected.
Adding Sensors to Your Station
Viewing Add-On Sensor Data
1. Hold the EXTRA SENSOR button until the
Sensor Reception Indicator starts to animate.
If you have multiple add-on sensors connected, press
the EXTRA SENSOR button to cycle through the data
you’d like displayed on the LCD. The Auto Scroll Icon
( ) will appear if activated. This setting will also
include relative pressure data in the cycle.
Specifications
APPENDIX
Wi-Fi NETWORK REQUIREMENTS
• Broadcast Frequency: 2.4GHz (802.11 b/g/n)
• Network Name/Password: Must Not Exceed 45
Characters
• Network Speed: Must Be Greater than 1 Mbps
Note: If you have multiple band router, this device will
connect to the 2.4GHz band when connecting to Wi-Fi.
MOBILE REQUIREMENTS
• Apple phones require iOS with cellular or Wi-Fi service.
• Android phones require Android OS with cellular or
Wi-Fi service.
STATION SPECIFICATIONS (V10v2)
• Indoor Temperature Range: 32°F to 122°F
(0°C to 50°C)
• Indoor Humidity Range: 10 to 99%RH
• Relative Pressure Range: 23.62 to 32.48 InHg
(800 to 1100 hPa)
• Power Requirements:
• Primary Power: 5.0V Adapter (included)
•Battery Backup: 1 “CR2032” Coin Cell Battery
(included)
• Station Dimensions: 7.80 in. L x 1.23 in. W x 6.44 in. H
(19.81 cm L x 3.12 cm W x 16.35 cm H)
• LCD Brightness: 4 Intensity Levels + OFF
(Programmable Auto-Dim Backlight Option)
• Language Options: English, Spanish, and French
(Translation Available for Menus & Calendar)
SENSOR SPECIFICATIONS (LTV-TH2i)
• Outdoor Temperature Range: -40°F to 140°F
(-40°C to 60°C)
• Outdoor Humidity Range: 10 to 99%RH
• Transmission Range: 400 feet (121 Meters) open air
• Power Requirements: 2 “AA” Batteries (not included)
• Sensor Dimensions: 1.97 in. L x 0.75 in. W x 5.73 in. H
(5.0 cm L x 1.91 cm W x 14.55 cm H)
* Water Leak Sensor shown as example, sensor not included
Inside of Water Leak Sensor* Top of Water Leak Sensor*
bit.ly/v10v2_parts
Find all of your add-on
sensor options by scanning
the QR code or visiting:
Care & Maintenance
Battery Replacement Instructions
When batteries of dierent brand or type are used together,
or new and old batteries are used together, some batteries
may be over-discharged due to a dierence of voltage or
capacity. This can result in venting, leakage, and rupture and
may cause personal injury.
•Always purchase the correct size and grade of battery
most suitable for the intended use.
•Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
dierent types.
•Clean the battery contacts and also those of the device
prior to battery installation.
•Ensure the batteries are installed correctly with regard to
polarity (+ and -).
•Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this
product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone
directory for local recycling centers and/or follow local
government regulations.