La Hacienda 58157US User manual

Produced in China for La Hacienda UK Ltd
Hangar 27, Site C, Aston Down Airfield, Nr Stroud, Glos, GL6 8HR, UK
www.lahacienda.co.uk
Tools list
Tools required (not included)
IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions.
These instructions form part of the product.
Please take note of all of the safety warnings listed in these instructions.
Please read these instructions in their entirety and retain them for future reference.
These instructions should be stored with the product.
This product is for domestic use ONLY and should not be used commercially or for contract purposes.
User Instructions - Please keep for future reference
Pizza Firepit with Grill 58157US
V1.0
La Hacienda
®

2
Careandsafeuseguidelines
DANGER Plastic bags can cause
This product is intended FOR OUTDOOR
USE ONLY.
DANGER Failure to read and observe all
warnings, directions for use and
extinguishing may result in unsafe conditions
leading to damage to property, injury or
death.
ALWAYS keep children and pets at a safe
distance from the product when in use. Do
not allow children to use the product.
NEVER leave a burning fire unattended.
DANGER of carbon monoxide
poisoning - NEVER light this product or
let it smoulder or cool down in confined
spaces.
DO NOT use this product in a tent,
caravan, car, cellar, loft or on a boat.
DO NOT use this product under
any outdoor awnings, parasols, sun
umbrellas or gazebos.
DO NOT use coal in this product.
DO NOT use this product on decking or
any other flammable surfaces such as dry
grass, wood chips, leaves or decorative bark.
Ensure product has a minimum of 7ft
overhead clearance and has a minimum of
7ft clearance from any combustible materials
or items.
DO NOT use this product as a
furnace - ONLY use as a patio heater.
DO NOT handle or move the product
whilst alight as it will be hot.
Ensure that the product is positioned on
a permanent flat, stable, heat resistant
non-flammable surface away from flammable
items.
The assembled product is heavy and once
positioned must not be moved whilst in use.
If it is necessary to move it once cooled, use
two persons to lift (DO NOT drag) the product.
As this model is made from steel, the surface
will age and develop surface rust as soon as
it is exposed to the natural weather elements
and also from first use.
If the product surface becomes scratched
or chipped, the damaged area should be
re-coated with a suitable non-toxic high
temperature paint.
For safety reasons, always inspect your
product prior to use for signs of fatigue
and damage and replace your model as
and when necessary.
FIRE HAZARD – Hot embers may emit
while in use. Always keep fire suppression
tools nearby.
DO NOT use gasoline, kerosene, white spirit,
lighter fluid,alcohol or other similar chemicals
for lighting or re-lighting the fire.
ONLY use methods of ignition which are
acceptable in accordance with your local
fire safety codes.
This product is ONLY suitable for use with
untreated wood, logs or charcoal.
DANGER Plastic bags can cause
suffocation. Dispose of all packaging
materials properly.
The unit may be left outside all year if a
cover is used to help protect it from bad
weather.
To help reduce surface rust, make sure
product is cool then rub with an oily rag
(vegetable oil).
Always use heat resistant gloves during use
and when adding fuel.
NEVER touch the ground/surface or leave
fuel or other objects directly under this
product, as the ground/surface will be very
hot and may remain so for some time even
after the product has been extinguished.
DO NOT overload the unit with fuel, only one
or two small logs is sufficient.
DO NOT use alcohol, intoxicants, narcotics
or any form of non-prescription drug when
handling the product as the ability to safely
assemble and operate will be impaired.

LIGHTING & REFUELLING
•This product is ONLY suitable for use with charcoal, untreated wood or logs.
•Prepare a stack of loosely crumpled newspaper and place on top of the fuel grate.
• Pile finely split dry firewood or kindling on top of the paper.
• To light the newspaper, use long safety matches or a long nosed lighter.
• Once sufficiently alight, add logs or larger pieces of untreated wood to the unit to increase the heat slowly.
• DO NOT overload with fuel, only one or two logs is sufficient.
•ALWAYS use heat resistant gloves when adding fuel as the unit will become very hot.
COOKING ON YOUR GRILL
• Add 0.5 kg of charcoal on top of the fuel grate and light according to the instructions.
• It is recommended that the unit be heated up and the fuel kept red hot for at least 30 minutes prior to first cooking on
the unit.
•Once the charcoal is completely coated in ash the product is at the optimum temperature for cooking.
•Using heat resistant gloves, place the grill (6) into the centre of the frame (8) using the supplied handle (7).
•If refueling is required, ALWAYS use heat resistant gloves and the supplied handle (7) to remove the grill as this will
be very hot.
•When finished DO NOT remove the grill until the unit has cooled completely.
TO USE AS A PIZZA FIREPIT
•Start the fire with a little kindling wood on the fuel grate (10), and then add one or two untreated logs. ONLY a small
fire is needed to cook a pizza.
•Using heat resistant gloves, insert the pizza stone (5) into the centre of the frame (8).
•Leave for approximately 10 minutes before cooking your pizza. This will allow the pizza stone (5) to heat up.
•DO NOT cook a pizza whilst flames touch the pizza stone (5), your pizza base will burn before the topping is cooked.
•Using heat resistant gloves and either a long metal slice or pizza paddle, carefully place your pizza on the pizza
stone (5) and place the lid (4) on top. Cooking time is approximately between 5 and 15 minutes.
•Check your pizza at regular intervals and once cooked remove the pizza using heat resistant gloves and a long
handle metal slice, or pizza paddle.
•ALWAYS ensure food is cooked thoroughly prior to consuming.
CLEANING
• The chrome cooking grill and pizza stone should be cleaned using a mild detergent. From first use the underside
and edges of the pizza stone will be coated with soot. This will be difficult to remove and should be expected. This
does not affect the use of the pizza stone.
Careandsafeuseguidelines
If using an outdoor cover, only position once
the fire has died and the unit has completely
cooled.
Use care when working near fire, do not stand
over fire when lighting or during use, loose
clothing can catch fire easily. If clothing catches
fire always remember to stop, drop and roll.
To extinguish unit – stop adding fuel and
allow fire to die or douse with sand.
DO NOT use water as this may damage
the product.
ALWAYS use heat resistant gloves when handling this product and a long handled metal slice or pizza paddle to
remove food from the grill or pizza stone.
FOOD COOKING INFORMATION
•DO NOT cook before the fuel has a coating of ash.
•ALWAYS wash your hands before and after handling uncooked meat and before eating.
•ALWAYS keep raw meat away from cooked meat and other foods.
•Before cooking ensure grill surfaces and tools are clean and free of old food residues.
•DO NOT use the same utensils to handle cooked and uncooked foods.
•Ensure all meat is cooked thoroughly before eating.
•CAUTION – eating raw or under cooked meat can cause food poisoning (e.g. bacteria strains such as E.coli).
•To reduce the risk of under cooked meat cut open to ensure it is cooked all the way through.
•CAUTION – if meat has been cooked sufficiently the meat juices should be clear and there should be no traces
of pink/red juice or meat colouring.
•Pre-cooking larger pieces of meat and joints is recommended before finally cooking on your grill.
•After cooking ALWAYS clean the grill cooking surfaces and utensils.
EXTINGUISHING
• To extinguish, stop adding fuel and allow fire to die or douse with sand. DO NOT use water as this may damage the
product.
STORAGE
• When not in use, and if stored outside, cover the product once it has cooled completely with a cover.
• Remove loose paint and rust with a wire brush when needed and re-paint the product using high temperature paint.
3

Careandsafeuseguidelines
Assembly Instructions
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this
product.
ASSEMBLY
STEP 1 - Fix 3x legs (12) to fire bowl (11) using fixing pack B.
STEP 2 - Attach ash catcher plate (14) and connector (13) to base of fire bowl (11) using
fixing pack C.
STEP 3 - Attach handles (9) to chrome frame (8) using fixing pack A.
STEP 4 - Place the charcoal grate (10) in the bottom of the fire bowl (11).
STEP 5 - Attach chrome frame (8) to fire bowl (11) by locating 3 pre-attached bolt heads into holes and
twisting in a clockwise motion to secure.
If this does not locate securely into the holes, please put some pressure on the round head nuts to
push the step bolt into a downwards position.
STEP 6 - Attach mesh cover handle (1) to the mesh cover (2) using pre-attached nut.
STEP 7 - Attach T shaped lid handle (3) to lid (4) using pre-attached fixings.
Your product is now ready to use, but please ensure you have read these instructions thoroughly prior
to use.
Parts list
1 (1x)
2 (1x)
3 (1x)
4 (1x)
5 (1x)
6 (1x)
14 (1x)
7 (1x)
8 (1x)
10 (1x)
11 (1x)
9 (2x)
12 (3x)
13 (1x)
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
components of the product.
Prior to assembly, read the instructions carefully. Check all parts against the parts list.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
A (4x)
M5 x 10mm fixing pack
B (6x)
M6 x 12mm fixing pack
M6 x 45mm fixing pack
C (1x)
4

5
3
14
12
13
9
11
10
C
2
1
6
7
8
Assembly diagram
5
4
B
A
The product is now ready to use but please ensure you have read these instructions thoroughly prior to
Note A large fire can damage or shorten
the life of the unit.
WARNING Do not leave the unit unattended
while the fire is burning.
Note Check the product for any signs of
damage or disrepair before each use.
Note Follow all local, state and national
codes when using this unit. Contact your
local fire department for information on
outdoor burning.
use.