Lab-T MCS-2.4G User manual

Copyright ⓒ2019. Lab-T, Inc.
User Manual

MCS-2.4G USER MANUAL

VATOO INC
Title Version V1.0
Release 2015.10.
CONTENTS
1. ............................................................................... 3
1.1. BUTTONS ................................................................................................................................. 4
1.2. VOLUME CONTROL .................................................................................................................. 4
1.3. GROUP SETTING ...................................................................................................................... 4
1.4. ID SETTING ............................................................................................................................. 5
1.5. TALK FUNCTION ..................................................................................................................... 5
1.6. SPECIFICATIONS .................................................................................................................. 7
MCS-2.4G User Manual
ERCOM FEATURES ..
MCS-2.4G INT

VATOO INC
Title Version V1.0
Release 2015.10.
1.
MODE
LCD
Mode Button
Talk Button
Power Button
Antenna
Headset Jack
AUX Jack
UP Button
Down Button
USB Jack
LED
MCS-2.4G user Manual
MCS-2.4G intercom Features

VATOO INC
Title Version V1.0
Release 2015.10.
1.1. Buttons
Button Function Description
Power Power ON/OFF
Talk Talk channel On/Off
Mode To set group mode or ID mode
Up VOL : To set volume level higher
Down VOL: To set volume level lower
1.2. Volume Control
How to set
VOL is displayed right after power is turned on. The default mode is volume control
mode
In Volume mode, volume can be set with UP/DOWN button in the range of 0 ~ 6.
1.3. Group setting
How to set
After turned on, phone is in volume control mode.
To change volume mode into group mode, press Mode buttons Long.
MCS-2.4G User Manual
MCS-2.4G intercom has volume control function that serves user to change volume level wanted.
MCS-2.4G intercom has group setting function that serves user to change group to communicate.

VATOO INC
Title Version V1.0
Release 2015.10.
In Group mode, group can be set with UP/DOWN button in the range of 0 ~ 39.
1.4. ID Setting
to have an unique Identification number in the same group and Master’s ID must be set “00” .
How to set
After turned on, phone is in volume control mode.
To change volume mode into group mode, press Mode Button Long
Press Function button to move ID change mode as below.
In ID change mode, ID can be set with UP/DOWN button in the range of 0 ~ 99.
1.5. TALK Function
default talk mode in ON, and in case of Slaves the default talk mode is in inactive state. Therefore
Master can start to talk after power is turned on, Slaves are required to press Mode button then
Talk function is activated. Talk function is available in 6 phones including Master at the same time.
While 5 slaves are using Talk, if another slave tries to talk by pressing mode button, Master
release one of 5 slaves that accessed first and allows the latest one to use Talk. In this way 6
MCS-2.4G user Manual
MCS-2.4G intercom has ID setting function to communicate with each other. Each intercom has
MCS-2.4G intercom serves TALK function to let users start to talk with others. In case of Master, the

T
i
t
l
e
User
Manual
V
e
r
s
i
o
n
V
1
.
0
R
e
l
e
a
s
e
2015
.
10
.
Compliance
to FCC US/CAN
- This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).
- Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation of the device.
-This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user encouraged
to try to correct the interference by one or more of the following measures :
. Reorient or relocate the receiving antenna.
. Increase the seperation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
Conformité à FAC É.-U./CAN
- Cet appareil est conforme à la partie 15 des Règles de la FCC et aux normes RSS d'Industrie Canada exemptées de
licence.
- Le fonctionnement est assujetti aux deux conditions suivantes : (1) ce dispositif ne doit pas causer de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris le brouillage pouvant causer le
fonctionnement non désiré du dispositif.
-Cet équipement a été testé et jugé conforme aux limites pour un appareil numérique de classe B conformément à
la partie 15 de
Règles de FAC. Ces limites visent à assurer une protection raisonnable contre le brouillage préjudiciable dans une
installation résidentielle. Cet équipement génère, utilise et peut émettre de l'énergie de fréquence radio et, s'il n'est
pas installé et utilisé conformément aux instructions, peut causer du brouillage préjudiciable aux communications
radio.
- Cependant, rien ne garantit qu'il n'y aura pas d'interférence dans une installation particulière. Si ce matériel cause
du brouillage préjudiciable à la réception de la radio ou de la télévision, qui peut être déterminé en l'éteignant et en
l'activant, l'utilisateur est encouragé à tenter de corriger le brouillage par une ou plusieurs des mesures suivantes :
. Réorienter ou déplacer l'antenne réceptrice.
. Accroître la séparation entre l'équipement et le récepteur.
. Connecter l'équipement à une sortie sur un circuit différent de celui auquel le récepteur est connecté.
Consultez le concessionnaire ou une radio expérimentée/Technicien en télévision pour l
’
aide.
- Tout changement ou toute modification non expressément approuvé par la partie responsable de la conformité
pourrait annuler le pouvoir de l'utilisateur d'utiliser cet équipement.

FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed)
Radiation Exposure Statement
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for
intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body or set the device to lower output power if such function is available.
.
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada etablies pour un
environment non control. Le produit est sur pour un fonctionnement tel que decrit dans ce manuel. La reduction aux expositions
RF peut etre augmentee si l'appareil peut etre conserve aussi loin que possible du corps de l'utilisateur ou que le dispositif est
regle sur la puissance de sortie la plus faible si une telle fonction est disponible.
Note.
the device was evaluated for body worn SAR condition and it is not a hand-held device.

VATOO INC
Title Version V1.0
Release 2015.10.
1.6. SPECIFICATIONS
ITEM SPECIFICATION
Radio Frequency Type
Type Wireless Intercom Unit
Voice Codec 16bit/8KHz
Rx Sensitivity -95dBm
Voice Latency < 30ms
Data Rate 500Kbps
Freq. Bandwidth 500KHz
Battery Li-ion Battery @3.7V/ TBD 1100mA
MCS-2.4G user Manual
Modulation
FHSS
Antenna
Helical Antenna
Talk Time for Microphone
10hr Typ.
Frequency response
50Hz ~ 4KHz
Power Consumption
Avg. 100mA
ISM 2407MHz ~ 2476MHz
CAUTION
MCS-2.4G is put in the pouch and attached to the waist.
Also the MCS-2.4G should not be used in other places than the waist.
Identification
FCC ID : YJH-MCS-24G
Product reference
MCS-2.4G
Table of contents
Other Lab-T Intercom System manuals