LaCie LaCinema Classic User manual

DESIGN BY NEIL POULTON
Quick Install Guide
LaCinema
CLASSIC

BOX CONTENT
LaCie LaCinema Classic
External power supply
Video composite + stereo cable
HDMI cable
USB cable
Remote control
2 x AAA batteries
Quick Install Guide
LaCie Utilities CD-ROM
(with detailed User Manual
and software)
Caution: Disk should not be reformatted in a file system other than FAT32 / MS-DOS.
If you reformat the disk in NTFS or HFS file system, files will not be available when
connected to a television.
Your LaCie LaCinema Classic has been pre-formatted as a FAT32 volume for use
with Mac OS and Windows. For more information, please see the user manual on
the LaCie Utilities CD-ROM.
Protect your investment – register for free technical support at www.lacie.com/register

Front View
1. Infra red receiver
2. USB expansion port (connect
disks formatted in FAT32 file
system only)
Rear View
3. Power supply connector
4. USB port
5. Ventilation area
6. HDMI connector
7. Video connector
8. Stereo audio connectors
9. Coaxial S/PDIF connector
9
8
7
421
5
63
LACINEMA CLASSIC

1. Connect the power supply which turns on the LaCinema Classic.
2. Connect the USB cable to the LaCinema Classic and to your computer.
3. Copy your multimedia files to the LaCinema Classic hard disk.
4. Safely disconnect the LaCinema Classic and its power supply.
IMPORTANT NOTICE: The LaCie LaCinema Classic is not designed or intended for use in
violation of copyrights or other intellectual property rights. The LaCie LaCinema Classic
may only be used in conjunction with materials legally owned or licensed by the user and
only to the extent that such ownership or license rights permit such use.
Setup Steps

Playing Multimedia Files
1. Choose one of the two connection methods:
a. Connect the LaCinema Classic to your television and stereo with the provided video
composite + stereo cable.
b. Connect the LaCinema Classic to your television with the provided HDMI cable.
You can also connect the LaCinema Classic to your home theater receiver’s coaxial
digital audio port with a coaxial digital audio cable (also called S/PDIF) (not included).
2. Connect the power supply.
3. Turn on your television and stereo (if applicable).
4. When the LaCinema Classic is connected to your television, turn it on by pressing the
remote control power button.
5. Use the remote control to select the media files you want to play.
TV
HOME THEATER RECEIVER