LAMAX TECH BFIT User manual

1
BFit by
Operating Instructions
Charging and replacing the wristband
Remove the body of the BFit from the strap according to the
instructions in the picture below. Charge the tness band before
using it for the rst time. Plug it into any USB charger or USB port
on your computer. Whilst charging, the white LED ashes and stops
when fully charged. Charging takes about half an hour.

2
Controls
The tness band can be controlled by moving the wrist or via touch.
Rotating the band activates the horizontal screen which then dis-
plays the current time. This function can be enabled or disabled in
the mobile app.
Touch the Bt display to do the following operations:
Action Operating the tness band
Turn on
the tness band
Touch and hold the display.
Light up
the display
Touch the display or rotate your
wrist to a horizontal position.
Turn o
the tness band
Scroll across the screen from left to right using
your nger until you see the icon . Then touch
the power switch icon . To turn o, touch and
hold the display.
Switch between
functions
Scroll across the screen from left
to right using your nger.
Select
function
Touch the display.
Conrm
selection
Touch and hold the display.
Fitness band functions
Time Distance covered
Date Calories burnt
Bluetooth connection Camera remote control
Finding connection Inactivity alert
Sleep monitor Alarm clock
Phone locate Display caller
Turn o wristband Display incoming messages
Pedometer

3
Installing the mobile app and pairing the tness band
The tness band is compatible with iOS (7.0 and higher) and Android
(4.3 and higher). Download the LinkFit mobile app to control the t-
ness band from the following link:
http://tech.lamax-electronics.com/
BFit/BFit-app-app-store
http://tech.lamax-electronics.com/
BFit/BFit-app-google-play
Enable Bluetooth on your smartphone. Turn on your Bt band.
When the band is not paired, it is in search mode and this icon .
appears next to the time display, above the battery status. Open the
LinkFit app on your smartphone. If your phone is not already paired
with the tness band, it will appear on the Device Scan page in the
app. Choose the band with your identication number and conrm
this pairing with your phone (Android – Conrm, iOS – Pair). The
identication number is displayed on the tness band screen when
it is turned on. Pairing should be complete within a minute. If after
a minute the pairing notication does not appear, repeat the abover
procedure. Once paired, this icon appears next to the time and abo-
ve the battery status. When paired the tness band can be seen in the
app Device Connected settings. After pairing the app will ask you to
enter your gender, weight, height and daily step target.
Data synchronization
The tness band automatically syncs with the app after pairing with
your smartphone via Bluetooth. The band displays the precise time
and synchronizes the pedometer data, calories burnt and distance
travelled. The initial data synchronization takes approximately one
or two minutes. Data can be synchronized manually in the app by
touching the icon . If data is not synchronized, turn Bluetooth o
and on again.
Sleep monitor
Scroll across the screen from left to right using your nger until you
reach this icon . Then touch and hold the display. The band then
briey vibrates and displays the exact time together with the icon
. Sleep monitoring is now enabled. Turn o sleep monitoring by
pressing and holding the display in this mode. The display will light
up, vibrate briey and the connection icon reappears next to the
time. Automatic sleep monitoring can also be enabled in the app. In
the settings turn on the Autosleep function. Sleep monitoring is now
automatically enabled between 8 pm and 9 am.

4
Alarm clock
In the app go to the Alarm settings. Set the day and time of the alarm.
At the set time the tness band will display this icon and vibrate.
Inactivity alert
In the app go to the Sedentary reminder settings. Here you can set the
time range and days of the week that you want the BFit to encourage
your activity. If you are inactive for a long time within this period the
band vibrates and this icon is displayed .
Phone locate
Navigate the menu of tness band, which is paired with the phone, to
the icon . Touch and hold the display until the band vibrates. The
phone will now begin to ring or vibrate (if it is on vibrate).
Smartphone camera remote control
In the app navigate to the camera controls in the section Camera. The
icon is then displayed on the paired tness band. To take a photo,
press and hold the BFit display.
Display incoming call and message notications
In the app navigate to Message push settings. Select which no-
tications to display on the tness band. If a notication does not
appear on the Bt screen, despite being paired with the phone and
with the notication function enabled in the app, disconnect and
reconnect the band to the smartphone via Bluetooth and turn the
notications o and on again in the app.
Water and dust resistant
The tness band is resistant to the ingress of water and foreign
objects according to the IP67 rating. This means that it is resistant to
water when immersed for 30 minutes up to a depth of 1m and to the
penetration of foreign matter including dust.
Technical specications
Bluetooth v 4.0
Display 0.91“ OLED
Weight of body 9 g
Weight of whole
device
26 g
Body dimensions 46 mm x 18.7 mm x 7.9 mm
Charging USB 5 V / 0.5 A
Battery 3.7V 75mAh Li-Ion
Water resistant in accordance with IP67, up to 1 m for 30 minutes

5
To use this product correctly and for detailed instructions
on installing and operating the mobile app and pairing
the band with your smartphone, read the most recent
version of the manual which is available to download at the
following link:
http://tech.lamax-electronics.com/
download/BFit_manual.pdf