Lambrecht aem 8141.6 User manual

USER MANUAL
Ventilated Sensor Shelter
8141.6

aem.eco
LAMBRECHT meteo |AEM | 8141.6
page –2
Function and description
Sensor shelters are used to protect temperature and humidity measuring instruments against unmeant inuences
of the weather when eecting measurements in the open air. Thus the determined results of measurement are
independent of precipitation and their evaporation as well as of direct and indirect radiation. The measuring results
would be safe and comparable.
Constructionally all sensor shelters are in such a way arranged that the data acquisition area of the installed sensor
are located in the middle of the shelter. Additional the upper lamellae is closed for thermal insulation purpose. Thus
optimal measuring conditions are ensured. The plastic lamellae are arranged in a dened distance, one above the
other. By the special lamella design the protection of the sensor against unmeant inuences is extremely eective.
The sensors are placed from down into the opening of the shelter and xed by a clamping screw. The maximum
outside diameter of the sensors is ∅ 25 mm. The shelters are prepared for the mounting at traverses or pipes.
Benets
• Articial ventilation
• Improved lamellar system
• Suitable protection against direct and indirect radiation
• Protection against weather inuences
• Simple mounting on pipes
Warranty
Please note the loss of warranty and non-liability by unauthorized manipulation of the system. You need a written
permission of the LAMBRECHT meteo GmbH for changes of system components. These activities must be
operated by a qualied technician.
The warranty does not cover:
1. Mechanical damages caused by external impacts (e. g. icefall, rockfall, vandalism).
2. Impacts or damages caused by over-voltages or electromagnetic elds which are beyond the standards and
specications in the technical data.
3. Damages caused by improper handling, e. g. by wrong tools, incorrect installation, incorrect electrical
installation (false polarity) etc.
4. Damages which are caused by using the device beyond the specied operation conditions.

aem.eco
LAMBRECHT meteo |AEM | 8141.6
page –3
Dimensioned drawing and pin assignment ventilator
WeitergabesowieVervielfältigungdieserUnterlage,VerwertungundMitteilungihresInhaltsnicht
gestattet,sowienichtausdücklichzugestanden.ZuwiderhandlungverpflichtenzuSchadensersatz.
AlleRechtefürdenFallderPatenterteilungoderGebrauchsmuster-Eintragungvorbehalten.
Passing on and duplication of this document, utilization and communication of
it's contents prohibited unless definitely permitted. Infringement is bound to
compensation. All rights reserved for patent or registered pattern.
Zust. Änderungen Datum Name Dateiname Ersatz für:
Blatt
Bl
Bearb.
Gepr.
Datum Name
Artikelnummer
Benennung
80.08141.600A03.idw
1 / 1
06.06.2017 FKrell
80.08141.600A03
Schutzhütte, ventiliert
1
A4
00.08141.600002 / .600004
Norm.
Revision
A
120 
 150
 42,4
205
244
ca.
 20 (  14...21 mm)
or
 25 (  18...25 mm)
142
80 62
max.  50
min.
 25
170
max.
 30
395
ca.
A Anschlusstabelle 13.09.2019 kreitz
Pin assignment
Cable color Function
red VCC (12V/24V)
black GND
yellow Pulse
Anschlussbelegung
Aderfarbe Funktion
rot VCC (12V/24V)
schwarz GND
gelb Tacho (Puls)

aem.eco
LAMBRECHT meteo |AEM | 8141.6
8141.6_ventiliert_b-de.indd 47.23
Copyright © 2023 LAMBRECHT meteo GmbH. All rights reserved.
Information in this document subject to change without notice.
Photo copyright: © Leonid - Adobe stock
LAMBRECHT meteo GmbH Tel [phone]
Friedländer Weg 65-67 Fax [phone]
37085 Göttingen E-Mail [e-mail]
Germany Internet www.lambrecht.net
page –4
Technical data
ID 00.08141.600004 Ventilated Sensor Shelter (8141.6)
Range of application: -40...+70 °C
Amount of lamellas: 15
Dimensions: Diameter = 150 mm; height = 395 mm (incl. mounting)
for mast diameter: 25...50 mm
Weight: 1,400 g
Ventilator: Range of application: -40...+70 °C
Supply voltage: 9.5...13.2 VDC
Power consumption: 1.4 Watt (max. 1.8 W)
Durability: 50,000 h
Protection class: IP 68
Accessories: Screwing for sensor diameter 14...21 mm
(included in scope of delivery)
Accessory: (optional)ID 32.08141.001010 Adapter for sensor diameter 5 mm
ID 67.26010.540100 Screwing for sensor diameter 18...25 mm
Disposal
LAMBRECHT meteo GmbH is listed and registered at the Stiftung Elektro-Altgeräte Register ear under:
WEEE-Reg.-Nr. DE 45445814
In the category of monitoring and control instruments, device type: “Monitoring and control instruments for
exclusively commercial use”.
Within the EU
The device has to be disposed according to the European Directives 2002/96/EC and 2003/108/EC
(Waste Electrical and Electronic Equipment). Do not dispose the old device in the household waste!
For an environmentally friendly recycling and disposal of your old device, contact a certied disposal
company for electronic waste.
Outside the EU
Please follow the regulations in your country regarding the appropriate disposal of waste electronic equipment.