Lancaster 164WAITRS1BK User manual

(1) /1PC (2) /1PC
(3) /1PC
(4)/1PC
(7) /1PC
(6)/1PC
(8) /2PC
SIZE: 43in. x 23in.
PART LIST:
HARDWARE LIST:
Cam Lock
Screw (46PCS) Hinge (4PCS)
Screws
(24PCS)
ASSEMBLY INSTRUCTIONS
ITEM NO.
(5) /1PC
(9) /1PC (10) /2PC (11) /2PC
Cam Lock
(46PCS)
Magnetic Door
Catch (2PCS)
ADEXA DIRECT LIMITED
TOOLS REQUIRED:
Phillip’s Head Screwdriver (not included)
SIZE: 43in. x 23in.
SIZE: 24in. x 8in.
SIZE: 24in. x 21in.
SIZE: 43in. x 24in.
SIZE: 24in. x 21in. SIZE: 24in. x 21in.
SIZE: 19in. x 12in.
SIZE: 24in. x 2in. SIZE: 19in. x 4in. SIZE: 23in. x 4in.
(A)
(B)
(C) (D) (E)
Left Side Board Right Side Board
Top Ledge
Top Shelf
Back Board
Middle Shelf Bottom Shelf
Cabinet Doors
Top Shelf Ledge Base Board A Base Board B
164WAITRS1BK
164WAITRS1WL

A
A=8PCS
A=10PCS
A=10PCS
TIGHTEN ALL THE A
SCREWS AFTER THEY ARE
INERTED INTO THE BOARD
A
(2)
A
AAAAAA
A A A
(1)
A
A
A
AA
AA
A
(3)
(6)
(4) (7)
ITEM NO. : 30194
STEP 1.
Screw Cam Lock Screws (Ax28) onto left and right side boards (1) & (2), and back board (5).
Insert cam lock nuts (Dx28) into Top Ledge (3), Top, Middle & Bottom Shelves
(4,6 & 7). Insert cam lock screws (Ax8) into Bottom Shelf (7). Arrow on cam lock
nut should face outer edge where screw will be inserted.
D
STEP 2.
D
(6)
(7)
(4)
(3)
D
D
D
D
D
DD
D
D
D
D
D
DD
D
D
DD
D
D
D
D
D
D
A
Lay Back Board (5) on ground. Add shelves (3,4,6 & 7): line up cam lock (D) and cam lock
screw (A). Tighten cam lock nut (D) with screwdriver once boards are in place.
STEP 3.
D=6PCS
D=6PCS
D=6PCS
D=8PCS
(5)
A
A
D
A
A
A
A
A

ITEM NO. : 30194
STEP 4.
(10)
(11)
A
(3)
(6)
(4) (7)
(2)
(1)
(9)
Align left and right-side boards (1) and (2) onto the
corresponding sides of shelves (3,4,6 and 7).
a. Once boards (1) and (2) are placed with cam
lock screws (A) in corresponding cam lock nuts
(D), tighten nuts with screw driver.
Screw in cam lock screws to top shelf ledge (9).
STEP 5.
(9)
Place piece (9) onto the top shelf (4) of the waitress
station, use screwdriver to tighten cam locks.
STEP 6.
Attach 2 magnetic door catches (Ex2) to
underside of middle shelf with screws (Cx4).
STEP 7.
Add cam locks nuts (Dx16) to base boards
(10 & 11). Add Cam lock screws (Ax8) to ends
of base boards (11)
STEP 8.
A
AA
A
DD
DD
Form a rectangle with base boards (10 & 11).
Align cam lock nuts with cam lock screws
and use screwdriver to tighten.
STEP 9.
(10)
(11)
(11)
(10)
TIGHTEN ALL THE A
SCREWS AFTER THEY ARE
INERTED INTO THE BOARD
A
AA

ITEM NO. : 30194
C
C
C
C
C
B
B
B
(8)
A
Use the rectangular piece made from step 9 to attach to bottom shelf (7) with
shorter base board (10) parallel to the front of the waitress station.
STEP 10.
Finally, place door hinges (Bx2) onto the predrilled holes in cabinet door (8x1).
Use screwdriver to screw (Cx4) into the predrilled holes. Repeat for second door.
STEP 11.
Turn waitress station right side up and make sure all connections are secure.
STEP 12.