Lancaster BL090Y19019 User manual

MODEL
BL090Y19019
VM Innovations
www.vminnovations.com877-472-4296
Assembly Instructions

BL090Y19019 1(Continued on the next page.) www.vminnovations.com
English
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited
warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer.
The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental
damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all
requests for warranty service, please feel free to contact our Consumer Service Department.
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Lancaster, cannot
handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE!
LANCASTER
877-472-4296
www.vminnovations.com
Customer Service Toll Free
Please Contact
Mon.-Fri., 9:00 a.m. to 5:00 p.m. EST
For additional resources and Frequently Asked Questions, please visit us at
DO NOT RETURN TO STORE
WE ARE READY TO HELP

This product is intended for INDOOR use only.
Please do not sit, climb or lean on the product.
Please do not drag the product when moving it in order to avoid damaging the legs.
Please only use spray furniture polish to clean the exterior surfaces of the product.
This is not a child's toy, adult supervision is required for children playing this game.
1.
2.
3.
4.
5.
- Not Included
- Not Included
- Included
RECOMMENDED
IMPORTANT NOTICE!
Adult Assembly Required.
CHOKING HAZARD - This item contains small parts. Not suitable for children under 3 years.
WARNING
Phillips Screwdriver
Standard (Flat Head Screwdriver)
Wrench
Electric Screwdrivers may be helpful during assembly; however, please set a low
torque and use extreme caution.
X4
At least 4 adults needed No children in assembly
area
Keep away from pets in
assembly area
Do not use or keep
product outdoors. For
indoor use only. No
wet/humid conditions.
Power Tools: Set to Low Torque
High Torque Over Tightened
2(Continued on the next page.) www.vminnovations.com
English
TOOLS REQUIRED

PART NUMBER FIG NUMBER
QUANTITY
PART
PART NAME Mainframe
1
x1
FOR FIG. 8
Lower Side Apron
2
x2
FOR FIG. 7
Lower End Apron
3
x2
FOR FIG. 7
Leg Panel Support
4
x4
FOR FIG. 2
Leg Top Panel - A
5
x4
FOR FIG. 1
Leg Top Panel - B
6
x4
FOR FIG. 1
Plastic Leg - A
7
x4
FOR FIG. 3
Plastic Leg - B
8
x4
FOR FIG. 3
Plastic Leg - C
9
x4
FOR FIG. 5
Plastic Leg - D
10
x4
FOR FIG. 4
Plastic Leg - E
11
x4
FOR FIG. 4
Apron Corner
12
x4
FOR FIG. 7
“L” Bracket
13
x8
FOR FIG. 2
Leg Base
14
x4
FOR FIG. 9
Leg Top Panel
15
x4
FOR FIG. 8
Leg Leveler
16
x4
FOR FIG. 10
E
D
B
A
3(Continued on the next page.) www.vminnovations.com
English
PARTS IDENTIFIER
Cue Rack - Side Panel
17
x2
FOR FIG. 12
Cue Rack - Middle Shelf
18
x2
FOR FIG. 12
Cue Rack - Base Panel
19
x1
FOR FIG. 13
Cue Rack - Top Panel
20
x1
FOR FIG. 13
Cue Rack Hook
21
x2
FOR FIG. 15
Cue Holder
22
x2
FOR FIG. 14
Triangle Holder
23
x1
FOR FIG. 15

HARDWARE
Cue
24
x2
FOR FIG. 16
Chalk
25
x2
Triangle
26
x1
FOR FIG. 16
Brush
27
x1
Billiard Ball Set
28
x1
FOR FIG. 16
FOR FIG. 2
M8x41mm Bolt
A1
x16
FOR FIG. 2, 9
M8 Spring Lock Washer
A2
x48
M8 Washer
A3
x16
FOR FIG. 2
4x15mm Screw
A4
x16
FOR FIG. 6. 7
P3x25mm Screw
A5
x8
FOR FIG. 9
M8x16mm Bolt
A6
x16
FOR FIG. 9
M6 Washer
A7
x12
FOR FIG. 8
3x15mm Screw
A8
x8
FOR FIG. 8
P3x18mm Screw
A9
x16
FOR FIG. 6
4x45mm Screw
A10
x8
FOR FIG. 1
M8x25mm Bolt
A11
x16
FOR FIG. 2
M6x45mm Bolt
A12
x12
FOR FIG. 8
Wrench
A17
x1
4(Continued on the next page.) www.vminnovations.com
English
ACCESSORIES
T4x12mm Screw
A13
x5
FOR FIG. 15
4x45mm Screw
A14
x8
FOR FIG. 13
3x38mm Screw
A15
x8
FOR FIG. 12
3x16mm Screw
A16
x4
FOR FIG. 14

5(Continued on the next page.) www.vminnovations.com
English
PRE-INSTALLED PARTS
BEFORE ASSEMBLY
Find a clean, level place to begin the assembly of your product.
Verify that you have all listed parts as shown on the part list pages. If any parts are missing, call our customer service.
1.
2.
Corner Pocket
P1
x4
FOR FIG. 11
Side Pocket
P2
x2
FOR FIG. 11
M6 “T” - Nut
P3
x12
FOR FIG. 7
M8x10mm Nut
P4
x16
FOR FIG. 7
Square Nut with Screws
P5
x12
FOR FIG. 2, 9
M8 “T” - Nut
P6
x16
FOR FIG. 1
M8x20mm Nut
P7
x8
FOR FIG. 2

6(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 1
5
x4
x4
6
x16
P6
Pre-installed
x8
A10
FIG. 2
4
x8
x4
P5
x8
P7
x16
A1
x32
A2
Pre-installed
Pre-installed
x8
13
x16
A11
x1
A17
x16
A3
4
P7 P5
A3
A2
A1
A2
A11
13
13
Note: Do NOT tighten the
Bolts (A11) until FIG. 9.
6
P6
5A10
5 6

7(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 3
7
x4
x4
8
A
B
BA
1
2
3
4
5
7
6
7
7 8
8
Note: For plastic legs - A, B (7 & 8), please follow
the illustration and the picture accordingly, lock
them together in the order of 1, 2, 3, 4, 5, 6, 7.
A
B
7 8
Note: You will hear a “click”
sound when the legs have
successfully locked together.
Please ensure that the legs
are firmly locked together.

8(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 4
x4
10
x4
11
E
D
D
E
E
11 10
11 10
IMPORTANT: You will hear a
“CLICK” sound when snapping the
Legs together. This will indicate
that the Legs are locked firmly in
place. If you do not hear a “CLICK”
sound the legs are NOT LOCKED.
10
11
1
D
11 10
11
10
10
11
2
3
4
E
Note: For plastic legs - E, D (11 & 10),
please follow the illustration and
the picture accordingly, lock them
together in the order of 1, 2, 3, 4.

9(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
x4
9
FIG. 5
10 9
9
9
FIG. 4 Assembly
1
2
4
3
10
11
C
Note: For plastic legs - C (9), please follow
the illustration and the picture accordingly,
lock them together in the order of 1, 2, 3, 4.
IMPORTANT: You will hear a “CLICK”
sound when snapping the Legs together.
This will indicate that the Legs are locked
firmly in place. If you do not hear a
“CLICK” sound the legs are NOT LOCKED.

10(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 6
x16
A9
x8
A4
A9
4
FIG. 5 Assembly
A4
FIG. 2 Assembly
FIG. 3 Assembly

11(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 7
2
x2
x2
3
x12
P3
Pre-installed
x16
P4
Pre-installed
x4
12
x8
A4
A4
12
Note: Arrow on the backside of Apron Corners shows direction to
slide the Apron Corners down.
SIDE VIEW: Part 12
Note: Flush with Aprons
12
TOP VIEW: Part 12
2
3
12
2
2
3
3
12
P4
P3

12(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 8
1
x4
x1
15
x12
A7
x8
A8
x12
A12
x1
A17
Note: Make sure “FLAPS” on Top
Leg Panels are FLUSH AGAINST
APRONS before inserting Screws.
A7 A12
A7
A12
15
A8
15
2
2
3
3
1

13(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 9
14
x4
x4
P5
x16
A2
x8
A5
x16
A6
Pre-installed
23
A2 A6
Note: After this step, tighten
the Bolts (A11) (See FIG. 2).
FIG. 6 Assembly
14
P5
A5

14(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
Note: Go back and make sure that all connections are tightened.
Lift the table off the ground.
Turn the table over.
Place it on all four feet at the same time on the ground.
1.
2.
3.
Four strong adults are recommended to turn over the table as shown.
CAUTION
DO NOT LEAN THE
TABLE ON ITS LEGS
DO NOT HOLD THE TABLE
BY THE LEGS
HOLD BY THE
TABLETOP
CABINET
FIG. 10
16 x4
16
Note: Avoid sideways
pressure on Legs when
turning over.

15(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 11
x4
P1
x2
P2
NOTE: DO NOT lift the table by the pockets. If you move the table, do not lift it
by placing your hands beneath the pockets and do not lean or put pressure on
them. Do not lean or sit on the end or side rails as this may damage the table.
P1
P2

16(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
ASSEMBLE THE CUE RACK
FIG. 12
x8
A15
17
x2
x2
18
FIG. 13
x1
19
A14 x8
x1
20
19
A14
A14
20
A15
17
17
18
18
A15

ASSEMBLE THE CUE RACK
17(Continued on the next page.) www.vminnovations.com
English
ASSEMBLY
FIG. 14
x2
22
x4
A16
FIG. 15
21 x2
x1
23
x5
A13
A16
22
22
23
A13
21
A13

ASSEMBLE THE CUE RACK
BL090Y19019 18(The last page.) www.vminnovations.com
English
ASSEMBLY
FIG. 16
x1
26
x2
24
x1
28
28
26
24
24

www.vminnovations.com