Lancaster BLL090 128P User manual

MODEL
BLL090_128P
SPREETAIL
www.wearespreetail.com877-472-4296
Please mention model # BLL090_128P_V2
Assembly Instructions

BLL090_128P 1(Continued on the next page) www.wearespreetail.com
English
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited
warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer.
The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental
damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all
requests for warranty service, please feel free to contact our Consumer Service Department.
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Lancaster, cannot
handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE!
LANCASTER
877-472-4296
www.wearespreetail.com
Customer Service Toll Free
Please Contact
Mon.-Fri., 9:00 a.m. to 5:00 p.m. EST
For additional resources and Frequently Asked Questions, please visit us at
DO NOT RETURN TO STORE
WE ARE READY TO HELP

This product is intended for INDOOR use only.
Please do not sit, climb or lean on the product.
Please do not drag the product when moving it in order to avoid damaging the legs.
Please only use spray furniture polish to clean the exterior surfaces of the product.
This is not a children's toy, adult supervision is required for children playing this game.
1.
2.
3.
4.
5.
- Not Included
- Not Included
- Included
- Included
RECOMMENDED
IMPORTANT NOTICE
Adult assembly required.
CHOKING HAZARD - This item contains small parts. Not suitable for children under 3 years.
WARNING
Phillips Screwdriver
Standard (Flat Head Screwdriver)
Wrench
Allen Key
Electric Screwdrivers may be helpful during assembly; however, please set a low
torque and use extreme caution.
X4
At least 4 adults needed No children in assembly
area
Keep away from pets in
assembly area
Do not use or keep
product outdoors. For
indoor use only. No
wet/humid conditions.
Power Tools: Set to Low Torque
High Torque Over Tightened
BLL090_128P 2(Continued on the next page) www.wearespreetail.com
English
TOOLS REQUIRED

2
x4
FOR FIG. 1
Leg Top Panel - A
3
x4
FOR FIG. 1 5
x2
FOR FIG. 11
4
x4
FOR FIG. 2
6
x4
FOR FIG. 3
Plastic Leg - A
7
x4
FOR FIG. 3
Plastic Leg - B
8
x4
FOR FIG. 4
Plastic Leg - C
9
x4
FOR FIG. 4
Plastic Leg - D
10
x2
FOR FIG. 6
Side Top Board
11
x2
FOR FIG. 6
Lower Side Apron
12
x2
FOR FIG. 6
End Top Board
13
x2
FOR FIG. 6
Lower End Apron
14
x4
FOR FIG. 7
Apron Corner
15
x4
FOR FIG. 8
Leg Top Panel
16
x4
FOR FIG. 9
Leg Base
17
x4
FOR FIG. 10
Leg Leveler
18
x1
FOR FIG. 6
Glue
Leg Top Panel - B Support BoardLeg Panel Support
19
x4
FOR FIG. 11
“U” Bracket
PART NUMBER FIG NUMBER
QUANTITY
PART
PART NAME Mainframe
1
x1
FOR FIG. 13
BLL090_128P 3(Continued on the next page) www.wearespreetail.com
English
PARTS IDENTIFIER

HARDWARE
20
x2
Cue
21
x2
Chalk
22
x1
Triangle
23
x1
Brush
24
x1
Billiard Ball Set
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
BLL090_128P 4(Continued on the next page) www.wearespreetail.com
English
ACCESSORIES
A14
x4
FOR FIG. 13
T4x5/8'' Screw
A1
x16
FOR FIG. 2
5/16''x1'' Bolt 5/16''x1-1/2'' Bolt
A2
x16
FOR FIG. 9 A3
x32
FOR FIG. 2, 9 A4
x8
FOR FIG. 1
F4x2'' Screw5/16'' Washer
A5
x16
FOR FIG. 5, 9
T5x5/8'' Bolt
A6
x16
FOR FIG. 5 A7
x18
FOR FIG. 6 A8
x32
FOR FIG. 7, 12
T4x1/2'' Screw
T3x5/8'' Screw
A9
x4
FOR FIG. 11
1/4''x1-1/2'' Bolt
T3x3/4'' Screw F4x1-3/4'' Screw
A10
x24
FOR FIG. 11, 13 A11
x4
FOR FIG. 11 A12
x8
FOR FIG. 8
1/4'' Nut
Allen Key
A13
x20
FOR FIG. 13
x1
A16
x1
Wrench
1/4'' Washer
1/4''x1-1/4'' Bolt
A15

P1
x26
FOR FIG. 1. 6 P2 FOR FIG. 6 P3
x20
FOR FIG. 13
x16
5/16'' NutBarrel Nut 1/4'' T - Nut Adjustable Bracket
P4
x2
FOR FIG. 11
BLL090_128P 5(Continued on the next page) www.wearespreetail.com
English
PRE-INSTALLED PARTS
BEFORE ASSEMBLY
Find a clean, level place to begin the assembly of your product.
Verify that you have all listed parts as shown on the part list pages. If any parts are missing, call our customer service.
1.
2.

FIG. 1
2
x4
x4
3
x8
P1
x8
A4
Pre-installed
BLL090_128P 6(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
FIG. 2
4
x16
x4
A1
x16
A3
x1
A15
Note: Do NOT tighten the
Bolts (A1) until FIG. 9.
A3
A1
4
23
3
2A4
P1

FIG. 3
6
x4
x4
7
1
2
3
4
5
6
67
6 7
Note: For plastic legs - A, B (6 & 7), please follow the illustration and the
picture accordingly, lock them together in the order of 1, 2, 3, 4, 5, 6.
Note: You will hear a “click” sound
when the legs have successfully locked
together. Please ensure that the legs
are firmly locked together.
6 7
BLL090_128P 7(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY

FIG. 4
x4
8
x4
9
Note: For plastic legs - C, D (8 & 9), please follow
the illustration and the picture accordingly,
lock them together in the order of 1, 2, 3, 4.
1
92
3
4
8
89
8
9
9 8
8
9
IMPORTANT: You will hear a “CLICK”
sound when snapping the Legs together.
This will indicate that the Legs are locked
firmly in place. If you do not hear a “CLICK”
sound the legs are NOT LOCKED.
BLL090_128P 8(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY

FIG. 5
x16
A6
x8
A5
BLL090_128P 9(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
A6
FIG. 4 Assembly
A5
4
FIG. 3 Assembly
4
FIG. 2 Assembly
4

x16
P2
FIG. 6
10
x2
x2
11
x2
12
x2
13
x1
18
x18
A7
x18
P1
Note: Apply the Glue (18) onto
the grooves of the Side and End
Top Boards (10 & 12).
18
10 & 12
11
10
A7
P1
P2
13
12
A7
P1
P2
Pre-installed
Pre-installed
BLL090_128P 10(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY

FIG. 7
14
x16
x4
A8
Note: Arrow on the backside of Apron Corners shows direction
to slide the Apron Corners down.
SIDE VIEW: Part 14
Note: Flush with Aprons
14
TOP VIEW: Part 14
11
13
14
11
11
13
13
14
BLL090_128P 11(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
14
A8

FIG. 8
x4
15
x8
A12
15
Note: Make sure “FLAPS” on Top
Leg Panels are FLUSH AGAINST
APRONS before inserting Screws.
15
A12
BLL090_128P 12(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY

x1
A15
FIG.9
16 x4
x16
A2
x16
A3
x8
A5
11 13
A3 A2
FIG. 5 Assembly
Note: After this step, tighten
the Bolts (A1) (See FIG. 2).
16
A5
BLL090_128P 13(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY

FIG. 10
17 x4
17
Note: Avoid sideways
pressure on Legs
when turning over.
BLL090_128P 14(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
Note: Go back and make sure that all connections are tightened.
Lift the table off the ground.
Turn the table over.
Place it on all feet at the same time on the ground.
1.
2.
3.
Four strong adults are recommended to turn over the table as shown.
CAUTION
DO NOT LEAN THE
TABLE ON ITS LEGS
DO NOT HOLD THE TABLE
BY THE LEGS
HOLD BY THE
TABLETOP
CABINET

5
A8
5
5
P4
FIG. 11
5x2
x4
A9
x4
A10
x4
A11
x4
19
x1
A16
x2
P4
FIG. 12
x16
A8
Pre-installed
x1
A15
BLL090_128P 15(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
A10 A11
A9
19
19
5
P4
A16
P4
Note: Please note that Adjustable
Bracket (P4) and Support Boards
(5) must be parallel with each
other.

FIG. 13
A10
x4
x20
A14
x20
A13
x1
A16
x20
P3
x1
1
Pre-installed
BLL090_128P 16(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
1
5
5
1
P3
A10
A13
1
5A14
P4
1
12
A10
A13
13
SIDE VIEW

BLL090_128P 17(Continued on the next page) www.wearespreetail.com
English
ASSEMBLY
NOTE: DO NOT lift the table by the pockets. If
you move the table, do not lift it by placing your
hands beneath the pockets and do not lean or
put pressure on them. Do not lean or sit on the
end or side rails as this may damage the table.
FIG. 14
STEP 1
HOW TO LEVEL YOUR TABLE
Level (Not Included)
Raise
Lower
17
Note: Turn clockwise to raise
and counterclockwise to
lower.

BLL090_128P 18(The last page) www.wearespreetail.com
English
HOW TO LEVEL YOUR TABLE
STEP 2
x1
A15
ADJUST CONCAVE TABLE ADJUST CONVEX TABLE
A15
P4
A15
P4
Note: Under the Mainframe (1), adjust the
Adjustable Bracket (P4) in order to level
the playfield of the Mainframe.
Level (Not Included)
1
A15
P4
P4

www.wearespreetail.com