Lancaster AWH066_017P User manual

MODEL: AWH066_017P
VM Innovations
ASSEMBLY INSTRUCTIONS
ATTENTION
Contact
MD Sports
Customer Service
DO NOT RETURN
TO THE STORE
* For additional resources and Frequently
Asked Questions, please visit us at
themdsports.com

www.themdsports.com
AWH066_017P 1
(Continued on the next page.)
NOTICE!
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty
period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer. The only exceptions
to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or
neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all requests for
warranty service, please feel free to contact our Consumer Service Department at:
WEBSITE: www.themdsports.com
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle
the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING
THE PRODUCT TO THE STORE.
LIMITED 90 DAYS WARRANTY
STAPLE YOUR RECEIPT HERE
1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendant.
Failure to do so will result in a delay in shipping parts to you.
2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly.
For questions that may arise or for missing/damaged parts, please contact us.
3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged
table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy.

www.themdsports.com
AWH066_017P 2
(Continued on the next page.)
Phillips Screwdriver - Not Included
Standard (Flat Head Screwdriver) - Not Included
Allen Key - Included
CAUTION!
Electric Screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution.
CAUTION!
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
1 - This product is intended for INDOOR use only.
2 - Please do not sit, climb or lean on the product.
3 - Please do not drag the product when moving it in order to avoid damaging the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces of the product.
5 - This is not a child's toy, adult supervision is required for children playing this game.
Power Tools
- Set Low Torque
High Torque
over tightened
WARNING:
Adult Assembly Required.
WARNING:
CHOKING HAZARD
TOOLS REQUIRED
ASSEMBLY TIPS
IMPORTANT NOTICE!
Strong Adults Needed No Children in
Assembly Area Keep away from pets
Do not use or keep product
outdoors. For indoor use only.
No wet/humid conditions.
X2
1 - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid
damage or injury. For the assembly, at least two adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each
assembly step.

www.themdsports.com
AWH066_017P 3
(Continued on the next page.)
IMPORTANT SAFETY INSTRUCTIONS Read all instructions
1. Read all instructions-All the safety and operating instructions should be read carefully before this hockey game is
played.
2. Caution-This is not a toy and is intended for use by or under the supervision of adults. Adults should review safety
guidelines with children to avoid possible risk of electric shock or other injuries.
3. Power sources-This hockey game should be operated only from 110-120V A.C., 60 cycle current as indicated on the
identification label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local
power company.
4. Power cord protection-Power cord should be routed so that it is not likely to be walked on or pinched by items placed
upon or against it. Pay particular attention to cords at plugs, convenience receptacles, and the point of exit from the
game.
5. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
6. Object and liquid entry-Never push objects of any kind into this game through openings as they may touch dangerous
voltage points or short-out parts which could result in a fire or electric shock. Never spill liquid of any kind on the game.
7. Ventilation-Openings in the game are provided for the exhaust air to create a cushion effect. The openings on the air
blower are for the intake air. Keep clear of the air blower when it is on. Do not put hands or other objects near the
intake openings. To ensure reliable operation of the game and protect it from overheating these openings must not be
blocked or covered.
8. Damage requiring service-Unplug the game from the wall outlet.
Do not attempt to service the blower yourself as opening or removing covers may expose you to dangerous voltage
or other hazards. Refer servicing to qualified service personnel under the following conditions.
A. When the power supply cord or plug is damaged.
B. If liquid has spilled, or objects have fallen into the blower.
C. When the air blower exhibits a distinct change in performance e.g. abnormal noise, this indicates a need for service.
9. Grounding or Polarization-This game is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
10. CAUTION-ELECTRICALLY OPERATED
PRODUCT-Not recommended for children under 8 years of age. As with all electrical products, precautions should
be observed during handling and used to reduce the risk of electric shock.
11. We recommend that the game be periodically examined for conditions that may result in the risk of fire, electrical
shock, or injury to persons. In the event such conditions exist, the game should not be used until properly repaired.
12. RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING - When using electric appliances, basic precautions should always be followed, including the following:
A) Read all the instructions before using the appliances.
B) To reduce the risk of injury, close supervision is necessary when an appliance is used by or near children.
C) Do not contact moving parts.
D) Only use attachment recommended or sold by the manufacturer.
E) Do not use outdoors.
F) For a cord-connected appliance, the following shall be included:
- To disconnect, turn all controls to the off position, then remove plug from outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Unplug from outlet when not in use and before servicing or cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or
damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
13. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
SAVE THESE INSTRUCTIONS
WARNING: To Reduce The Risk Of Fire Or
Electric Shock, Do Not Use This Fan With
Any Solid-State Speed Control Device.
For Household use only.

Felt Pad
Leg Leveler
2 3 41
x1 x2 x2 x2
1x2x
x2x4
Round Puck
x2
8765
121110
9
151413
x1
x2
x2
End Cap
Pusher
Electronic Scorer
x2x2
Scorer Support - A
Scorer Support -B
Connect Box
A1
x1
Allen Key
A2
x12
5/16” x 2” Bolt
Goal Box
x2
End Leg Panel
Right LegMainframe Left Leg
Side Leg Panel
FOR FIG. 1 FOR FIG. 3, 5 FOR FIG. 3, 5 FOR FIG. 6
FOR FIG. 4 FOR FIG. 2 FOR FIG. 1
FOR FIG. 1 FOR FIG. 6 FOR FIG. 7
FOR FIG. 7
FOR FIG. 2
FOR FIG. 7FOR FIG. 2
FOR FIG. 3, 5 FOR FIG. 3, 5
FOR FIG. 2
A3 A4
x12 x12
5/16” Washer 3x15mm Screw
3x8mm Screw
4x12mm Screw
4x20mm Screw
A5
x8
A6
x10
A7
x8
FOR FIG. 6 FOR FIG. 1
FOR FIG. 5, 7
AWH066_017P PARTS LIST
www.themdsports.com
AWH066_017P 4
(Continued on the next page.)

P1
x1
Motor
P2
x4
P3
Square Nut with Screws
x12
T - Nut Scoring Sensor Wire
P4
x2
A5 X 8
X 1
8
9 X 2
P5
x2
Puck Catcher
P6
x4
Apron Corner
1
A5 9
A5
8
Underside of tableUnderside of table
www.themdsports.com
AWH066_017P 5
(Continued on the next page.)
AWH066_017P PRE-INSTALLED PARTS
FOR FIG. 3 FOR FIG. 6
FOR FIG. 3
FOR FIG. 3, 5
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Product.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts list pages.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
FIG. 1
FIG. 1A
FIG. 1B
X 1
1

X 2
12
X 2
13
A7 X 8
7X 1
12
A7
12
A7
7
13
A7
A7
13
X 1
X 1
2
3
X 6
A2
X 6
A3
X 1
A1
X 1
P1
X 6
P3
P3
X 4P6 1
3
2
A2
A3
www.themdsports.com
AWH066_017P 6
(Continued on the next page.)
FIG. 2
FIG. 3
FIG. 3A
FIG. 2A
FIG. 2B
P6
P1
FIG. 1 Assembly

3
5
5
A6
2
3
2
5
5
www.themdsports.com
AWH066_017P 7
(Continued on the next page.)
FIG. 4
FIG. 5
FIG. 5B
FIG. 5A
X 2
5
X 1
X 1
2
3
X 6
A2
A2
X 6
A3
X 8
A6
FIG. 4 Assembly A3
X 1
A1
X 6
P3
P3

X 4
X 2
4
10
X 12
A4
X 4
P2
P2
4
4
10
A4
www.themdsports.com
AWH066_017P 8
(Continued on the next page.)
FIG. 6
FIG. 5 Assembly
Note: Go back and make sure that all connections are tight.
DO NOT LEANTHE
TABLE ONITS LEGS
HOLD TABLE
CABINET DO NOT HOLD THE LEGS
CAUTION: Two strong adults are recommended to turn
the tableover as shown.
1. Lift the tableoff the ground.
2. Turn the tableover.
3. Place iton all four feet at the same time on the ground.

X 2
14
X 2
11
A6 X 2
X 2
15
14
11
A6
15
1
7
FIG. 2 Assembly
Scorer wire
Goal wire
8
1
www.themdsports.com
AWH066_017P 9
(Continued on the next page.)
FIG. 7
FIG. 7A
FIG. 7B
FIG. 6 Assembly
Note: Tear off the backside papers
of the Felt Pads (#11) and stick them
at the bottom of the Pushers (#14).
Note: Insert the Scorer Wires
into the Electronic Scorer (#7).

WARNING:
!
1) Require 3 pcs “AAA” Batteries (Not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechargeable (nickel - cadmium) batteries.
ELECTRONIC SCORER OPERATION
1. Install Batteries
Battery Box: Remove the battery cover and insert 3 “AAA” Batteries into the battery box. ( 3 “AAA” Batteries not
included.) When HOME / VISITOR indicates “0”, the game can start.
2. Reminding:
a. Batteries must be installed according to the correct polarization (+ and -) required.
b. Please clean the battery contacts and also those of the device prior to battery installation.
c. If the game will not be used for a long period of time, we recommend that the batteries should be removed.
3. When the “HOME” player scores a point, the “HOME” indicator will show 1 point; when the “VISITOR” player
scores a point, the “VISITOR” indicator will show 1 point.
4. The first player to reach 10 points wins the game, and the winner’s indicator will stay at 9 points and flash for
several seconds.
5. After the game, you can press the “RESET” button to start a new game and the HOME/VISITOR will indicate “0”.
NOTE:
1. You can press the “RESET” button at any time, to set the scorer back to the beginning status.
2. You can press “ON / OFF” at any time to turn off the scorer. Press “ON / OFF” again to turn it back on
P5 P5
P1
P4
P4
www.themdsports.com
AWH066_017P 10
(Continued on the next page.)

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
www.themdsports.com
AWH066_017P 11
(The last page)
YOU ARE NOW READY TO PLAY!
Table of contents
Popular Video Gaming Accessories manuals by other brands

All In 1 Gaming
All In 1 Gaming Pro SE Sim Frame Assembly instructions

OYPLA SPORTS
OYPLA SPORTS 4234 user manual

Elgato
Elgato Game Capture HD60 manual

Par T Golf
Par T Golf Double Eagle Elite Plus 4 Installation and maintenance manual

König Gaming
König Gaming GAME-WHEEL11 manual

Bionik
Bionik QUICKSHOT PRO user guide