Land Pride AFM4214 Series User manual

8
All Flex Mowers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
Model 4214 Specification Drawing 14043
315-587S continued on next 3 pages 02/07/11
AFM4214 Model
Description Specification / Capacity Description Specification / Capacity
Discharge Type Rear Cutting Height 3/4" to 5 1/4" (In 1/4” increments)
Cutting Width 14’-0” Blade Drive Belt 1 B-Section
Overall Width 14’-3” Drive Belt Tension Spring Loaded Idler with Overcenter
Release
Transport Height 7’-7 1/2” Blade Bearing Sealed Ball Bearings
Transport Width 6’ - 8” Blade Overlap 1 1/4"
Overall Length 14’-10” Mowing Position
12’-11” Transport Position Blades 3 Each Per Deck Low Lift (5/16" x 2 1/2" x 20 29/32") Optional Blades:
Medium Lift, High Lift & Mulching
Machine Weight W/15” tires = 3,000 lbs.
W/18” tires = 3,150 lbs. Blade Spindle Speed 3,362 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP Blade Tip Speed 18,396 F.P.M.
Hitch Pull Type with Adjustable Clevis and
Safety Tow Chain Deck Tires 10 each, Air tires with Sealant 18 x 9.5 or 15 x 6.6
Tongue Support 2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support 3/8” Steel Channel Transport Tires 2 each, 23 x 10.5 with Sealant
Gearboxes 540 RPM (1)-Splitter & (3)-Wing Transport Locks Automatic with Pull Rope Release
Gearbox Lubrication Gear Lube 80-90W EP Turning Radius Zero Turning Radius
Gearbox Oil Capacity 3 - Wings: 3.5 Pints
SD Splitter: 2.125 Pints or
OMNI Splitter: 2.5 Pints
Mowing Capacity @ 2 mph = 3.39 Acres Per Hour
@ 4 mph = 6.78 Acres Per Hour
@ 6 mph = 10.17 Acres Per Hour
Anti-Scalp Roller Front Center and
Outside Deck Corners Wing Deck Flex 23 Degrees Left To Right 22 Degrees Front To Back
Main Driveline (1) Cat. lV Constant Velocity
with Slip Clutch Center Deck Flex 10 Degrees Left To Right 22 Degrees Front To Back
Deck Drivelines (3) Cat. II Hydraulic Outlets 1 Set Required
Deck Size & Quantity 3 each / 60” Deck Cylinders Dual Acting
Deck Overlap 6” Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Thickness 3/16”

9
All Flex Mowers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
Model 4214 Specification Drawing
14044
315-587S continued on next 2 pages 02/07/11

10
All Flex Mowers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
AFM4216 Model
Description Specification / Capacity Description Specification / Capacity
Discharge Type Rear Cutting Height 3/4" to 5 1/4" (In 1/4” increments)
Cutting Width 16’- 8” Blade Drive Belt 1 B-Section
Overall Width 16’ -10” Drive Belt Tension Spring Loaded Idler with Overcenter
Release
Transport Height 8’ -10” Blade Bearing Sealed Ball Bearings
Transport Width 6’- 8” With Lock Pins Installed Blade Overlap 1 1/4"
Overall Length 15’-0” Mowing Position
13’-4” Transport Position Blades 3 Each Per Deck Low Lift (5/16" x 2 1/2" x 25") Optional Blades:
Medium Lift, High Lift & Mulching
Machine Weight W/15” tires = 3,315 lbs.
W/18” tires = 3,465 lbs. Blade Spindle Speed 2,302 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP Blade Tip Speed 18,340 F.P.M.
Hitch Pull Type with Adjustable Clevis and
Safety Tow Chain Deck Tires 10 each, Air tires with Sealant 18 x 9.5 or 15 x 6.6
Tongue Support 2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support 3/8” Steel Channel Transport Tires 2 each, 23 x 10.5 with Sealant
Gearboxes 540 RPM (1)-Splitter & (3)-Wing Transport Locks Automatic with Pull Rope Release
Gearbox Lubrication Gear Lube 80-90W EP Turning Radius Zero Turning Radius
Gearbox Oil Capacity 3 - Wings: 3.5 Pints
SD Splitter: 2.125 Pints or
OMNI Splitter: 2.5 Pints
Mowing Capacity @ 2 mph = 4.0 Acres Per Hour
@ 4 mph = 8.1 Acres Per Hour
@ 6 mph = 12.1 Acres Per Hour
Anti-Scalp Roller Front Center and
Outside Deck Corners Wing Deck Flex 23 Degrees Left To Right 22 Degrees Front To Back
Main Driveline (1) Cat. lV Constant Velocity
with Slip Clutch Center Deck Flex 10 Degrees Left To Right 22 Degrees Front To Back
Deck Drivelines (3) Cat. II Hydraulic Outlets 1 Set Required
Deck Size & Quantity 3 each / 72” Deck Cylinders Dual Acting
Deck Overlap 8” Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Thickness 3/16”
Model 4216 Specification Drawing 17853
315-587S continued on next page 02/07/11

11
All Flex Mowers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
Model 4216 Specification Drawing 13665
315-587S End 02/07/11