Land Pride RTA1042 User manual

136
Rotary Tillers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
311-252S continue on next page 5/10/11
26982
RTA10 Series
RTA1042 RTA1050 RTA1058
Recommended Tractor PTO HP 17 to 25 Horsepower (25 HP maximum)
Weight 358 lbs. 385 lbs. 415 lbs.
Tilling Width 42" 50" 58"
Overall Width 47 1/4" 55 1/4" 63 1/4"
3-Point Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick-Hitch
Offset Capabilities Yes, Cannot offset with Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
16” - 26”
16” - 26”
23” - 19”
25” - 25”
18” - 32”
32” - 18”
29” - 29”
22” - 36”
36” - 22”
Number of flanges 567
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline Category II
Off-Center Shear bolt - standard
Slip Clutch - optional
Gearbox Construction 25 HP input at 540rpm 1.5:1 ratio
Cast iron housing, straight bevel gears
Lubrication Gear Lube 80-90W EP
Capacity 2 pints
Drive Chain #80 Roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 225 rpm at 540 rpm PTO

137
Rotary Tillers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
26983
311-252S end 5/10/11
RTA15 Series
RTA1550 RTA1558 RTA1566 RTA1574
Recommended Tractor PTO HP 17 to 35 HP 20-40 HP 25-50 HP
Weight 412 lbs. 444 lbs. 476 lbs. 508 lbs.
Tilling Width 50" 58" 66” 74”
Overall Width 56 1/4" 64 1/4" 72 1/4” 80 1/4”
Hitch Type Category l, Adjustable Lower Hitch Clevis with Plated Pins
Fits Land Pride Quick Hitch
Sideshift Capabilities Yes, Works with Land Pride Quick-Hitch
Sideshift Dimensions Centered
Shifted Right
Shifted Left
25” - 25”
12” - 38”
31” - 19”
29” - 29”
12” - 46”
35” - 23”
33” - 33”
12” - 54”
39” - 27”
37” - 37”
16” - 58”
43” - 31”
Number of Flanges 6789
Number of Tines per Flange 4
Tine Construction Alloy steel heat treated “C” shaped blades
Skid Shoes Adjustable
Storage Stands Adjustable
Rear Deflector Adjustable profile stamped rear deflector
Driveline Category IIl Heavy Duty
Off-Center Shear bolt - standard
Friction Clutch - optional
Gearbox Construction 50 HP input at 540 rpm 1.92:1 ratio
Cast iron housing, straight bevel gears
Lubrication Gear Lube 80-90W EP
Capacity 2 pints
Drive Chain #80 roller chain - Fully enclosed in oil bath with drain & fill plugs
Drive Chain Lubrication Shell Alvania EP 00 or equivalent
Sprockets Case hardened teeth, splined bores
Rotor Swing Diameter 15"
Rotor Shaft Speed 211 rpm at 540 rpm PTO