Landmann 28251 User manual

CROSSROADS CHIMINEA
Model 28251
ASSEMBLY INSTRUCTIONS
odel 28251
FOR SAFE OPERATION, PLEASE READ ALL ASSEMBLY
AND OPERATING INSTRUCTIONS BEFORE USE.
Congratulations on your purchase of the Crossroads
Chiminea! At Landmann USA, our goal is to provide
products that are easy to assemble and fun to use.
Should you have questions, issues, a defective part or
if you have any questions concerning its use, please
contact us at:
[email protected]
-OR-
1-800-321-3473 M-F 8-5 Eastern ime
Proof of purchase may be required.
Landmann USA
Cartersville, GA 30120
www.landmann-usa.com
Made in China
©2008 LandmannUSA
• HIS CHIMINEA IS FOR OU DOOR USE
ONLY!
• USE ONLY ON BRICK, CONCRE E, S ONE
OR O HER MASONRY SURFACES.
• KEEP HE FIRE REASONABLE. A LARGE
FIRE CAN DAMAGE OR SHOR EN HE LIFE
OF HE CAS IRON.
• DO NO USE FIREWOOD OVER 10” LONG
IN HIS CHIMINEA.
• DO NO USE ON LAWNS OR WOODEN
DECKS.
• KEEP HE CHIMINEA AWAY FROM
BUILDINGS, FLAMMABLE I EMS AND
VEHICLES.
• HE CHIMINEA IS FOR ADUL USE ONLY.
• DO NO MOVE HE CHIMINEA WHILE I IS
BEING USED.
• DO NO LEAVE UNA ENDED A ANY
IME WHILE IN USE.
• DO NO USE IN WINDY CONDI IONS.
• DO NO OVERLOAD OR USE O BURN
LEAVES OR GARBAGE.
• KEEP HE SPARK SCREEN IN PLACE
WHILE USING.
• USE CAU ION WHEN REMOVING HE
SPARK SCREEN, AS HO S EAM OR A
FLARE UP COULD CAUSE BURNS.
• BEFORE EACH USE, MAKE SURE HE
CHIMINEA IS IN GOOD WORKING
CONDI ION.
• USE CAU ION AF ER HE FIRE HAS
BEEN EX INGUISHED- SURFACES WILL
REMAIN HO FOR SOME IME.
• BE SURE ALL COALS ARE COLD BEFORE
EMP YING. IF NECESSARY POUR WA ER
ON COALS.
READ FIRST!
RULES FOR SAFE OPERATION
PAGE 1
REV.3, 1/21/08
!
!

Assembly Instruct ons:
You will need these tools for assembly:
edium phillips or flathead screw driver, pliers or small adjustable wrench.
Step 1 Place fire bowl (H) on its side and attach the three legs (L) with
six 30 bolts, lock washers, flat washers and nuts.
Step 2 Attach three connector plates (G) to the fire bowl bottom with
three 20 bolts, lock washers, flat washers and nuts.
Step 3 Attach the bowl vent / cleanout (S) to the firebowl with two
25 bolts and 5 nuts. Attach the vent latch (V) to the firebowl
using two 25 bolts and 5 nuts.
Step 4 Attach the top (F) to the fire bowl and connector plates with
three 20 bolts, lock washers, flat washers and nuts.
Step 5 Attach poker hook (D) on the right side of the top using a lock
washer and nut.
Step 6 Install chimney (C) to the top using three 30 bolts,
lock washers, flat washers and nuts.
Step 7 Insert the grate halves (J) inside the fire bowl.
Step 8 Place the spark arrestor (B) and cap (A) on the chimney.
Step 9 Attach the spark screen hook ( ) using one 20 bolt,
lock washer and nut. Place the spark screen (K) on the hook.
Step 10 Enjoy!
Ma ntenance:
The Crossroads Chiminea may be cleaned with water and mild
detergent. Periodic maintenance is required to return painted cast iron
surfaces to original appearance. Remove any rust with sandpaper or steel
brush. Repaint with grill paint for high temperature surfaces. Follow paint
manufacturerʼs instructions.
Parts and Quant t es:
Exploded V ew
CROSSROADS CHIMINEA
Model 28251
Do not return product to the store. If you have
quest ons or trouble w th assembly,
please contact us at: 1-800-321-3473 or at
customerserv [email protected]
PART DESCRIPTION QTY
A
B
C
D
E
F
G
H
J
K
L
N
O
P
Q
R
S
T
U
V
CAP
SPARK ARRESTOR
CHI NEY
POKER HOOK
POKER
TOP
CONNECTOR PLATE
FIRE BOWL
GRATE HALVES
SPARK SCREEN
LEGS
SPARK SCREEN HOOK
30 BOLT
20 BOLT
LOCK WASHER
FLAT WASHER
6 NUT
BOWL VENT / CLEANOUT
25 BOLT
5 NUT
BOWL VENT LATCH
1
1
1
1
1
1
3
1
2
1
3
1
9
7
16
16
17
1
4
4
1
1
3
4
5
6
7
8
9
PAGE 2
2