Lanpro LP-PCI/P User manual

Active Products - Communication Cards
www.lanpro.com
123 Manual for installing the LP-PCI/P card with
the Windows 7 Operating System.
LPPCIP_M123_ENB01W
123 Manual for installing the
LP-PCI/P card with the
Windows 7 Operating System.

www.lanpro.com
Active Products - Communication Cards - 123 Manual for installing the LP-PCI/P
Following these instructions will install the card-LP-PCI/P, for system Windows 7.
2
First, please download the corresponding driver set from www.lanpro.com and decompress them accordingly:
http://www.lanpro.com/products/active/products/download.asp?id=823
1
Figure 1
We now remind you the common precautions you should take when installing hardware inside a personal computer:
(Anti-static protection, power disconnection, etc.), then proceed to open your PC and insert the PC Board in an
available slot, as shown in gure 1.
Proceed now to turn your equipment on, it will indicate you if it found a new device that could not be installed, then
proceed to select: Start and Control Panel, as shown in gure 2.
2
3
Figure 2

www.lanpro.com
Active Products - Communication Cards - 123 Manual for installing the LP-PCI/P
3
Proceed to enter in: System and Security, System,
then open : Device Manager as shown in gure 3.
Proceed to look for the corresponding device list as
shown in gure 4.
By clicking the right button of the mouse and then
selecting with the left button: Properties, then:
Update Driver, as shown in gure 5.
4
5
6
Figure 4
Figure 3
Figure 5

www.lanpro.com
Active Products - Communication Cards - 123 Manual for installing the LP-PCI/P
4
Figure 9
A new window will pop-up in which you should select
option: Browse, as shown in gure 7.
8
Figure 7
Locate the corresponding folder, as shown in gure
8, please remember that this depends on the le
location where you decompressed and saved the
les, then select: OK.
Now select: Next. As shown in gure 9.
9 10
Figure 8
A new window will pop-up asking for how to search the
driver, left-click on: Browse my computer for driver
software, as shown in gure 6.
7
Figure 6

www.lanpro.com
Active Products - Communication Cards - 123 Manual for installing the LP-PCI/P
5
Figure 10
Figure 11
Figure 12
Once the installation has
finished, please select: Close ,
as shown in figure 11.
Watch your PC installing the corresponding
driver as shown in gure 10.
Now you can verify that the device was properly installed as shown
in gure 12, nally close the Device Administrator.
12
11
13