Larson Electronics LEDHWP-SC-1000 User manual

LEDHWP-SC-1000
100 Watt Traditional Semi Cut-Off LED Wall Pack 11000 Lumens - Replaces 400
Watt Metal Halide Fixt
Instruction Manual
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com 1of 5
Thank you for your purchase of the Larson Electronics LEDHWP-SC-1000.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•INSTALLATION SHOULD ONLY BECONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•RISK OFFIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL
SYSTEMS. IFNOTQUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.
•TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE LEDHWP-SC-1000 MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL CODE
AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
RISK OF PERSONAL INJURY –FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
RISK OF BURN –ALLOW FIXTURE TO COOL BEFORE SERVICING.
The LEDHWP-SC-1000 Traditional Style Semi-Cutoff LED Wall Pack Light offers high light output from a compact form factor and is
designed to provide a more durable and long lived alternative to halogen and metal halide units. This 100 watt integrated LED light
assembly is designed to replace 400 watt metal halide wall packs and produces a wide flood beam without the high heat, fragile
construction, or high energy costs of traditional lighting. The LED LEDHWP-SC-1000 provides 11000 lumens and 50,000 hours of
reliability with up to 75% savings compared to traditional 400 watt metal halide wall pack fixtures.
WIRING
Standard pigtail(flying leads) wiring
We strongly encourage a licensed electrician install this product,in all locations especially in outdoor areas
where weatherproofing may be required. Universal voltage driver permits operation at 100V - 277V AC, 50 or 60Hz.
Warning: Check product label for correct input voltage!
Attach supply line wires to the appropriate light fixture wires as shown
in thediagram 
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device and take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the
unit. Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.

Features
•
•
•
•
•
Lumileds LED, high luminous efficiency and
long working life.
High efficiency LED Driver, the wide range
input voltage AC100-277V
/ 200 - 480 V.
Die Cast aluminium cooling design,high quality
and better cooling for LED Tj < 85℃.
Excellent Optics design, greatly improve the
light utilization and evenness.
Product Applications
The LED Semi-Cutoff Wall Pack series can be
widely used in indoor or outdoor lighting(Wet
location),like mechanical or electronic
processing workshops, storage warehouses,
steel mills, gas stations, toll booth, waiting
rooms, the platforms of railway station , indoor
stadiums.
LEDHWP-SC-1000
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com 2of 5

LED SEMI-CUTOFF
Installation Guide
& WARNING :--------------�

          
             
                        
       
                      
            
                       
  
1. Unpacking

2. Installation
 

 
  
•
t
 



 



  


  


A
       
  
 
 

B Red
LEDHWP-SC-1000
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com 3of 5

LEDHWP-SC-1000
Power
Input Voltage
PF
Driver Efficiency
Luminous Flux
Color Temperature
CRI
Lighting Angle
LED Brightness Decay
Working Life
Working Temperature
Storage Temperature
Protection Level
Cable
100W
AC100-277V/200-480V
>0.95
>90%
16000 Lm
4000K/5000K
Ra>80
60*90°
<5%/6000 hrs
>50000 hrs
-30 - +45℃
-40 -+80℃
Wet Location/IP65
Input Connect, 1.5m
Specifications
Technical Parameters
Photometry
Unit：inch(mm)
Structure Features
Shell materials: Aluminum & PC.
Finish: Black/White
Net weight：6.8Kg (15 lbs)
Product Size:370mm*227mm*197mm
•
•
•
•
Carton Size:385mm*320mm*280mm
•
Example: LEDHWP-SC-1500
WSD
1 0 W
HWP 27
XX K
X
Conmpany
WISDOM
Product
HWP
Semi-Cutoff
Wall Pack
Power
10W(150W)
Voltage
27
AC100-277V
Color Temp
4 0K( 4 000K)
5 0 K(5 0 00K)±500 K
Control
P
Photocell
48
AC 2 00- 480 V
LEDHWP-SC-1000
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com 4of 5

LEDHWP-SC-1000
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com 5of 5
MAINTENANCE
Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool down before
performing maintenance.
Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens will void
the warranty.
1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine
checks to be made on a yearly basis. Frequency of use and environment should determine this. It is
recommended to follow an Electrical Preventive Maintenance Program as described in NFPA 70B:
Recommended practice for Electrical Equipment.
2. The lens should be cleaned periodically as needed to ensure continued photometric performance.
Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use mild soap or a liquid
cleaner.
3. Inspect the cooling fins on the luminaire to ensure that they are free of any obstructions or
contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if needed.
4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use.Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The LEDHWP-SC-1000 is designed to provide years of reliable performance. Should the need for replacement parts
arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
[e-mail] OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.