Laser MIC-KKAAST User manual

User Manual
Portable Karaoke Machine
MIC-KKAAST & MIC-KKAFLM

SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• Karaoke Speaker
• 2 x Microphones
• Carry Strap
• User Manual

Bluetooth Version: 5.0
Bluetooth Range: 10M
Speaker Output: RMS 6W
Signal to Noise Ratio: ≥80dB
Battery: 3.7V/1200mA
Charging Input: DC 5V/1A
Dimensions: 19.2 x 7.8 x 22.9cm
SPECIFICATIONS

Open the backpack
SETUP
Step 1:

SETUP
Take out the strap
Step 2:
continued...

SETUP
The straps can be fastened to both ends
of the speaker carry handle.
Step 3:
continued...

SETUP
Insert 1 or both microphones into the ports
on the speaker.
Step 4:
continued...

CONTROLS
Turn device on/off
-
1.
DC5V Charging Port
-
2.
USB Port
Insert USB to play music files
-
-
3.
Micro SD card slot
Insert Micro SD card to play
music files
-
-
4.
Voice changer
Tap to switch between
3 different voice filters.
-
-
5.
13
9 7 5
4 3
2 1
8 6
10
11
12

CONTROLS
Press and hold to skip
track forward.
Tap to increase volume.
-
-
-
-
6.
Tap to mute the lyrics on
any music being played.
7.
Tap to play/pause.
Note: Results may vary
based on individual tracks.
8.
-
-
Tap to “cheer”.
Press and hold to “boo”.
10.
11. -Microphone 1 input.
-Microphone 2 input.
-Tap to switch between
Bluetooth, USB, and
Micro SD card modes.
9.
12.
continued...

BLUETOOTH PAIRING
TIP:
If password is requested during Bluetooth
pairing then enter “0000”.
• Turn the speaker on and it should
automatically go into Bluetooth pairing mode.
• Search for “MIC-KKAAST or MIC-KKAFLM”
under Bluetooth settings of device you are
connecting to e.g., smartphone or tablet.

MICRO SD CARD
PLAYBACK
• Plug in a Micro SD Card via the port on
the speaker.
• Only MP3 files are supported.
• Up to 32GB cards are supported.
• If card is not detected, please try formatting
on a Windows computer to another file system.

USB DRIVE PLAYBACK
• Turn the speaker on and it should
automatically go into Bluetooth pairing mode.
• Only MP3 files are supported.
• Up to 32GB drives are supported.
• If drive is not detected, please try formatting
on a Windows computer to another file system.
CHARGING
• Plug one end of the included charging
cable into the port on the speaker.
• Plug the other end to a 5V/1A USB
power source.
• A full charge can take up to 6 hours.

TROUBLESHOOTING
• Check battery level and charge if required.
• Try charging the speaker with a USB Wall
Adapter (like a smart phone charger) instead
of a laptop or computer.
No Power:
• Try turning on speaker while connected to
a power source.
• Make sure the Micro SD Card or USB drive
is 32gb or less.
• Make sure to only use MP3 music files
copied to the Micro SD Card or USB drive.
• Check the Micro SD Card or USB drive file
system and format to another type using a
Windows computer.
Micro SD Card or USB drive
not recognised or files
not playing:

• Place the speaker next to the smart device
you are pairing to e.g., Smartphone.
• Wait up to 1 minute for the device name
to appear.
• If the Bluetooth name “MIC-KKAAST or
MIC-KKAFLM” does not appear on the list
of available devices, then try refreshing the
list or searching again.
Problems Connecting to
Bluetooth:
TROUBLESHOOTING
• Make sure the speaker is in Bluetooth mode
(default mode when turning on speaker)
before searching on your smart device.
• If the speaker is already connected to
another smart device, it will need to be
unpaired from that device first or it will need
to be out of Bluetooth connection range of that
device before it can be connected to another.
continued...

www.laserco.com.au
Check us out at
www.youtube.com/lasercoau
Visit our website