QUICK GUIDE SPK-BT05
2
TROUBLE SHOOTING / Q & A
a few hours battery life?
liding the power switch to the off position
when not in use.
I always findconfiguring Bluetooth
software to be very difficult. Do you have
any tips tomake this easier?
Forthe first time user, we recommend that you
read these instructions carefully before
connecting your first device. Bluetooth technology
is the preferred wireless technology, with the set
up steps simply repeated for any Bluetooth device.
How long does the speaker need to
charge?
ut 1 hour to charge. When
charging the LED light will be red. When finished
charging the LED will turn OFF.
For further product information and instruction please visit our product web page atwww.laserco.net or
email
[email protected]. Please note: As continual improvements are made to this product, slight operational differences may occur. For the most up-to-date user manual, please visit our web site.
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12
months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or
instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to
other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair or exchange (where
possible) for this productifit becomes defective within the warranty period. Thiswarrantywill no longer apply where the defect
is a result of alteration, accident,misuse, abuse,normal wear and tear, neglect or improper storage.
Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified, your place of
purchase or Laser will make an assessment based on the date of manufacture, the condition of the Laser Product and the type of
defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and refund or replace the product asper their
store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser . Customer Service with details of your
defective Laser Product:Phone: (02) 9870 3355; or Email: service@laserco.com.au or online www.laserco.net/support/warranty
(click on “Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde, NSW 2113
Step 3: Laser . will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective
Product and a copyof your receipt. Laser will cover thecostof the returndelivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product for inspection, we will inform you of our
assessment of your claim within 7 days. When we contact you, we will firstly let you know whether you have a valid claim under
this Warranty, and if so, we will inform you whether your defective Laser Product will be replaced or repaired, togetherwith the
number of days you can expect to wait to receive your replaced or repaired Laser Product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to areplacement
or refund for amajor failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
