Laser SPK-SB150-081 User manual

User Manual
Laser 2.1ch Soundbar with Wired Subwoofer
SPK-SB150-081

WHAT’S IN THE BOX
Laser 2.1ch Soundbar
Wired Subwoofer
Remote Control
Optical Cable
Mounting Screws
User Manual

SPECIFICATIONS
Soundbar Rated Power 30W
Subwoofer Rated Power 30W
Speakers 2 x 2.5 inch
Subwoofer 5.25 inch
Frequency Response 45Hz – 20kHz
Power Supply 110V – 240V ~ 50/60Hz AC
Display LED
Remote IR
Remote Battery 2 x AAA
Bluetooth Version
5.3
Bluetooth Name SPK-SB150-081
Bluetooth Range 10 meters
Soundbar Dimensions 800 x 78 x 68mm
Subwoofer Dimensions 160 x 265 x 280mm

PRODUCT DIAGRAM
SIDE VIEW
BACK VIEW Subwoofer
1. Power On/O
2. Volume +
3. Volume –
4. USB Input
5. AUX Input
6. Optical Input
7. Subwoofer Output
8. Subwoofer
9. Power Input
1 2 3 5
USB OPTICAL SW-OUT
Input 100-240V
50/60Hz
4 6 7 9
8

REMOTE CONTROL
PRODUCT DIAGRAM
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Power
Mode
Volume +
Previous
Play/Pause
Volume –
Music EQ
Movie EQ
Bluetooth Pairing
Reset
Mute
Next
News EQ
Repeat
MODE MUTE
PAIR
RESET
VOL+
VOL-
MOVIE MUSIC NEWS
1
211
12
6
13
14
3
4
8
9
10
7
5

SOUNDBAR CONNECTION
METHODS
CONNECTION METHOD 1
(RECOMMENDED): OPTICAL
Note: Using the optical
connection method
the TV volume and
soundbar volume
will both be heard,
we recommend
setting the tv volume
to the lowest setting or
zero so that sound only plays
through the soundbar.
• Turn on the soundbar and set it to Optical mode.
• Connect an optical cable to the optical input on the
soundbar and then to a TVs optical port.
• On the TV change the audio output to OPT, SPDIF, or
OPTICAL (this setting may have a dierent name based
on your TV manufacturer).
USB OPTICAL SW-OUT
Input 100-240V
50/60Hz
OPTICAL
Sounder
OPTICAL
TV
OPTICAL
Cable

SOUNDBAR CONNECTION
METHODS
CONNECTION METHOD 2:
BLUETOOTH (TV)
• Turn on the soundbar and set the source to Bluetooth.
• On the TV change the audio output to Bluetooth.
• You may receive a prompt to confirm the
connection on the TV. The soundbar name will appear as
SPK-SB150-081
CONNECTION METHOD 3: BLUETOOTH
(SMART DEVICE/COMPUTER)
• Turn on the soundbar and set the source to Bluetooth.
• On your computer/smart device, search for and select
“SPK-SB150-081”.
• You may receive a prompt to confirm the
connection on your Smart Device/Computer.
Soundbar Smart Device
/Computer
Bluetooth
Soundbar TVBluetooth
continued...

SOUNDBAR CONNECTION
METHODS
CONNECTION METHOD 4: AUX
AUX
Sounder
AUX
TV
AUX
Cable
• Turn on the soundbar and connect a 3.5mm cable to the
AUX input port.
• Connect the other end to the AUX/Headphone output
on your TV.
• On the TV change the audio output to AUX/
Headphones.
continued...

BASIC OPERATION
1. Connect the subwoofer to the soundbar via the
subwoofer input.
2. Connect both the soundbar and subwoofer to a
power source. The soundbar enters standby mode.
3. Insert 2 x AAA batteries into the remote.
4. Press the power button on the remote or soundbar
control panel.
5. Switch the soundbar to the desired input mode using
the MODE button on the remote. The available options
are Bluetooth (BT), Optical (OPT), AUX and USB.
Note:
1. For USB mode to work a USB flash drive (up to 32gb)
containing MP3 files must be connected to the sound-
bar.
2. The subwoofer connection is optional. Soundbar can
operate without the subwoofer, however bass impact will
be lessened.

NO SOUND COMING FROM THE
SOUNDBAR.
TROUBLESHOOTING
Check your soundbar is set to the correct input source.
Check the soundbar connection to the source device
(e.g. TV). Please refer to the soundbar connection
methods in this manual for tips on connecting.
Check the settings on your source device
(e.g. TV). Please refer to the soundbar connection
methods in this manual for tips on settings.
Adjust the volume level on the soundbar or input device.
Toggle the mute function on the soundbar or input
device.