LaserPegs NG400 User manual

Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Triangle Power Base, AC
Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer’s
warranty. The packaging must be kept because
it contains important information.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2014 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: [email protected]
Compatible with other construction kits
Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.
www.LaserPegs.com
Color
Code
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
Construction Compatible
Laser Pegs®link that
allows you to connect to
other construction kits.
Laser Pegs
®
Stackable
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
Requires 3-AA Batteries
Batteries NOT
Included
Laser Pegs® Parts List
Construction Parts List
SQUARE
PEG
STACKABLE
There is No LED In The 90 Degree Peg
x4
x4
x4
x4
x4
x7
x3
x9
x8
x8
x18
x2
Y PEG
SQUARE
M-M PEG
STRAIGHT
T PEG
90° PEG
x6
x6
x6
x6
45° PEG
WHEEL PEG
STRAIGHT
PEG
Laser Pegs®
Peg Cord
STRAIGHT
M-M PEG
x2
x2 x2
x1
x1 x1
x2
x2
x2
x2
x2
x5
x5
x5
x8 x8
x8
x2
x2
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and o smoothly. The 90° Pegs are
essential to construction but they DO NOT LIGHT UP.
Connecting Pegs
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
Using an
AC Adapter
Remove all batteries
from Laser Pegs® power
base before using the
5-volt AC adapter.
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle Power Base
top peg holes.
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
The AC adapter and the Triangle Power Base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
damage, they must not be used until the damage has been repaired.
Never connect more than 200
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.
Please dispose of batteries properly as per state and local regulations.
1. Remove the three (3) screws.
2. Place three (3) AA batteries in the correct
position - as displayed inside the Triangle
Power Base.
3. Reassemble the Triangle Power Base.
4. Replace the three (3) screws.
5. Push RED Power Button to turn on!
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the Triangle Power Base.
9. Never connect more than 200 Laser Pegs®
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited.
15. DO NOT THROW BATTERIES INTO FIRE!
Replacing Batteries
Environmental Phenomena
* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to
normal operation when the interference stops. If not, it may become necessary to turn the power
o and back on, or remove and reinstall the batteries.
* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory,
requiring the user to reset the devise by removing and reinstalling the batteries.
WARNING: STROBE LIGHTS
MAY CAUSE SEIZURES
DO NOT SUBMERGE IN WATER
Add 3-AA Batteries
Ages 5 +
LIGHT UP
CONSTRUCTION SET INCLUDES:
24 Models+
ANY CREATION YOU CAN BUILD
SPACE
NG400
• 36 Laser Pegs®
• 125 Construction Parts
• Laser Pegs® Peg Cord
• Triangle Power Base
• Instruction Manual
Remove the three Phillips head
screws with a 4mm screw driver.
Requires (3AA) Batteries
Remove the 3 Phillips head screws
Red
Power Button
SOUND/ON/FLASH/FLASH FASTER
Peg Holes
AC Adapter
Connection
Push Red
Power Button
to turn on/o
Push Red Power Button to
cycle through 4 dierent
light settings.
Sound Activated
Triangle Power Base
The toy is not to be connected to more than
the recommended number of power supplies
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
Model
Diculty
Level
STAR CRUISER
5
A
B
C
8
STEP
A B
COMBINE
1
STEP
STAR CRUISER: The rst human spaceight missions were managed by national governments.
Today, some private companies oer programs for tourists.
Laser Pegs® CARES
Questions? Comments?
For additional compliance info:
1-866-432-3735
Contact: [email protected]

Copyright 2014© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
MADE IN CHINA
9
STEP
10
STEP
11
STEP
12
STEP
13
STEP
18
STEP
19
STEP
14
STEP
20
STEP
21
STEP
27
STEP
22
STEP
23
STEP
24
STEP
25
STEP
26
STEP
16
STEP
15
STEP
17
STEP
G
D
E
F
© 2014 National Geographic Society kids.nationalgeographic.com

28
STEP
35
STEP
29
STEP
36
STEP
30
STEP
37
STEP
31
STEP
38
STEP
32
STEP
39
STEP
33
STEP
34
STEP
H

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
48
STEP
49
STEP
43
STEP
44
STEP
45
STEP
46
STEP
42
STEP
40
STEP
41
STEP
DE
COMBINE
I
47
STEP

55
STEP
59
STEP
51
STEP
52
STEP
53
STEP
54
STEP
56
STEP
50
STEP J
K
57
STEP
58
STEP
J
COMBINE
I

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
65
STEP
60
STEP
67
STEP
61
STEP
63
STEP
64
STEP
K
COMBINE
66
STEP
COMBINE
G
62
STEP
COMBINE
F

71
STEP
69
STEP
70
STEP
COMBINE
C
H
COMBINE
68
STEP
NATIONAL GEOGRAPHIC KIDS and Yellow Border Design are trademarks of
the National Geographic Society, used under license. All rights reserved.

Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
ASTRONAUT
SPACE MARINE TROOP
LANDER ROCKET
SPACE SHUTTLE
CARRIER
MINI SPACE
SHUTTLE SPACE
TELESCOPE
SHUTTLE AND
SATELLITE
HELPER BOT
STARSHIP
MOON SPEEDSTER
SHUTTLE AND
GANTRY 2 STAGE ROCKET
GIANT ROBOT
OTHERWORLDLY
WALKER
ALIEN STUNT FIGHTER MOON ROVER
MINI ROBOT TRANSPORT SHUTTLE
MARS
TRANSPORT
VEHICLE
FLAG ON THE
MOON
MARS
VOYAGER
SPACE
CAPSULE
HOVER
VEHICLE
73
STEP
72
STEP
ATTACH MODEL TO THE
TRIANGLE POWER BASE
Copyright 2014 © All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
MADE IN CHINA
Laser Pegs® CARES
Questions? Comments?
For additional compliance info:
1-866-432-3735
Contact: [email protected]
FCC Notice:
Th
is device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B) / NMB-3 (B)
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in
a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. H
owever,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encour
aged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.