LaserPegs RUNNERS 1320 B User manual

Please read manual before you begin! Failure to
follow this manual’s instructions may result in
damage to the Power Base and/or Laser Pegs®.
Not adhering to these directions will void the
manufacturer’s warranty. Packing has to be kept
since it contains important information.
To construct with Laser Pegs®, slide two pieces together to form a connection.
Slide each piece on and o smoothly. The 90° pegs are essential to construction
but they DO NOT ILLUMINATE.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Suppor[email protected]
Compatible with other construction kits
Laser Pegs®link that
allows you to connect to
other construction kits.
Allows you to connect to other
construction kits.
Allows you to connect to
both Laser Pegs® and other
construction kits.
TANK RUNNERS™ Power Base
www.LaserPegs.com
Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.
Color
Code
Connecting Pegs
RUNNERS™ POWER BASE
Switch power button to
cycle through the Runners™
power settings.
LIGHT/OFF/ON/FLASH
Power
Button
Peg Holes
Connecting Laser Pegs® to RUNNERS™POWER BASE AVOID DAMAGE TO PEG HOLES
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.
Do not submerge in water.
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
Construction Compatible
Laser Pegs
®
Stackable
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®
are not broken, they just need stronger batteries.
You have 2 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
*To avoid short-circuits, keep metal objects and
other un-authorized materials from obstructing
the peg holes.
1320 B
RUNNERS™
For Boys And Girls
Ages 5 And Up
LIGHTED
CONSTRUCTION SET INCLUDES:
• 2 Laser Pegs®
• 24 Construction Parts
• Runner Power Base
• Instruction Manual
Requires 3 AAA Batteries
Batteries NOT
Included
Laser Pegs® Parts List
Construction Parts List
6 Models+
Any creation you can build
There is No LED In The 90 Degree Peg
x2
x1
x4
x1
x2
Never connect more than 20
pegs at one time.
x3
x5
x2
x2
Remove the Philips
head screw with a
4mm screw driver.
Requires (3AAA) Batteries
Requires (3AAA) Batteries
When Using Batteries
1. Remove screws.
2. Place three AAA batteries in the correct
position - as displayed inside the Runners™
Power Base.
3. Switch power button setting to
light/on/ash
4. Switch speed setting to engage motor.
5. Do not mix old and new batteries.
6. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium)
batteries!
7. Exhausted batteries are to be removed
from the power base.
8. Never connect more than 20 Laser Pegs®
9. Non-rechargeable batteries are not to be
recharged.
10. Rechargeable batteries are only to be
charged under adult supervision.
11. Rechargeable batteries are to be removed
from the toy before being charged.
12. Batteries are to be inserted with the
correct polarity.
13. The supply terminals are not to be short-
circuited.
Speed
Settings*
Speed
Settings*
POWER SETTINGS
SPEED SETTINGS
Allows you to construct
with Laser Pegs®.
Construction Part Connection
The Laser Pegs® Runners™ power base allows you to build with Laser Pegs® and
construction parts to form models. It is battery operated to run on its own.
LIGHT - Illuminates your model
OFF - Turns power o
ON - Turns on motion and light
FLASH - Light Flash with motion
Battery
Compartment
The Runners™ power base will not operate on its own if the speed setting is in neutral.
*If your speed setting is in neutral the Runners™ will not run by itself.
Once you have switched the speed setting to either medium or fast
the motor will engage.
Hitch
Hitch
Screw
Requires (3AAA) Batteries
Push Switch Push Switch
(CENTER) Push Switch
MEDIUM NEUTRAL FAST
x4
SQUARE
PEG

Hitching Runners™
To Runners™
ATTACHING RUNNERS™ POWER BASE TOGETHER
RUNNERS™ HITCH
CHANGING TREAD
Additional tires or tracks sold separately.
A
Model
Diculty
Level
MINI TANK RUNNER
MINI TANK - A heavy armored and armed vehicle that moves on an articulated track.
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
STEP
B

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
COMBINE
C
8
STEP
9
STEP
10
STEP
11
STEP
12
STEP
14
STEP
15
STEP
13
STEP
16
STEP
B

Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558
www.LaserPegs.com
MINI TANK RUNNER
R1 TANK RUNNER SNOW RUNNER
AMPHIBIOUS RUNNER
RECON VEHICLE RUNNER
CONSTRUCTION RUNNER
COMBINE
A C
18
STEP
19
STEP
20
STEP
17
STEP