Lasonic LTA-260 User manual

TA-260
ATSC Converter Box
[][]IOO BVr
DIGITA
0DTt/
STANDARD EFINtTlONTElEV1SION
Product that have earned the ENERGY STAR@ are designed to
protect the environment through superior energy efficiency

TSC Converter Box
. Important Safety Instru ctions ------------------------------------------------ 02
2. Trad ema rks --------------------------------------------------------------------- 04
3. Accesso ries --------------------------------------------------------------------- 04
4. Before Ope rati ng --------------------------------------------------------------- 04
5. Quick Reference Control Operation ---------------------------------------- 07
5- . Front Pa nel ---------------------------------------------------------------- 07
5-2. Rea r Pa ne I ----------------------------------------------------------------- 07
5-3. Remote Control ----------------------------------------------------------- 07
5-4. Easy Setu p For First Use ------------------------------------------------ 08
5-5. Anten na Setu p ------------------------------------------------------------ 0
6. Basi c Operation ----------------------------------------------------------------
6- . Channel Scan -------------------------------------------------------------
6-2. Channel Information -----------------------------------------------------
6-3. Change Viewing Channel ------------------------------~---------------- 2
6-4. OS La ng uag e ----------------------------------------------------------- 2
6-5. Closed Caption ----------------------------------------------------------- 2
6-6. Parental Control (V-CHIP) ---------------------------------------------- 3
6-7. Mute ------------------------------------------------------------------------- 8
6-8. Audio Menu ---------------------------------------------------------------- 8
6-9. Scree n Mode -------------------------------------------------------------- 9
6- O. Sleep Timer---------------------------------------------------------------- 9
7. Before Calling For Service --------------------------------------------------- 9
7- . Quick Service Check List ----------------------------------------------- 9
8. Gen era I Specifi cation s -------------------------------------------------------- 20
9. Remote Controller Code ------------------------------------------------------ 2
0. Limited Warra nty ------------------------------------------------------------- 22
- 01 -

TSC Converter Box
The lighting flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un insulated "dangerous
voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Warning:
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so, and do not
expose this apparatus to rain or moisture.
Note:
CD Read these instructions.
~ Keep these instructions.
Q) Heed all warnings.
@ Follow all instructions.
CID Do not use this apparatus near water.
@ Clean only with dry cloth.
(/) Do not block any ventilation openings. Install in accordance with the
instructions.
CID Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
@ Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet
consult an electrician for replacement of the obsolete outlet.
@ Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
@ Only use attachments/accessories specified by the manufacturer.
@ Use only with the cart, stand, tripod, bracket, or table specified by <ml
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip over. 1\
~
02

TSC Converter Box
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
~ To Reduce the Risk of Fire or Electric Shock, Do not Expose This Appliance To
Rain or Moisture.
q9J Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, shall not be placed on the apparatus.
The Shock Hazard Marking and Associated Graphical Symbol is provided on the
back panel of unit.
Plug the adapter into AC11OVoutlet, Connect the supplied adapter in the slot of
the unit marked "DC IN", If the unit will not used for a long time, remove the
adapter from the outlet.
Before connect the adapter and the unit, make sure that all the connections
have been made.
) If an outside antenna is connected to the device, be sure the antenna system is
grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code provides information
with respect to proper grounding of mast and supporting structure, grounding of
the lead-in wire to antenna discharge unit. Size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Example of Antenna Grounding
as per national electrical code
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
.,.'- POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC --NATIONAL ELECTRICAL CODE
03

TSC Converter Box
Ff,CCNotice1
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
W RNING: FCC Regulations state that any unauthorized changes or
modifications to this device not expressly approved by the manufacturer
could void the user's authority to operate this device.
[][]IOOLBVr
DIGIT L
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished works.
@1992-1997 Dolby Laboratories, Inc. All rights reserved.
. EFOJI~QfERATING
4.1. Prepare the Remote Control
Please insert the batteries into remote controller.
Battery
Cover
Note: Be sure to match the battery terminal with the +/- marks inside
the remote control.
- 0 -

TSC Converter Box
4.2. ntenna Connections
D utdoor Antenna Connection.
Refer to one of the following diagrams while connecting the outdoor
antenna.
• Using a VHF/UHF combination outdoor antenna.
A. Combination VHF/UHF Antennas
300/75-ohm
ADAPT R
(Not supplied)
VHF/UHF
ANTENNA
300-ohm
twin-lead
ATSC Converter Box
• Using separate VHF and UHF outdoor antenna.
B. Separate VHF/UHF Antenna
ATSC Converter Box
VHF
ANTENNA
300-ohm
twin-lead
-
\
C MBINER
30.0-ohm (notsupplied)
tWin-lead Cl-
-~
75-0hmj
coaxial
cablellt}
Connect an outdoor antenna cable lead-in to F-Type terminal.
(Notice: F-Type connector should be finger-tightened only.)
F-Type ~ l~
/i--: 75-ohm
co~~~ - coaxial
~ ~ cable
05

TSC Converter Box
.3. Connect to your analog signal TV display
CD V Cable Connection.
Please plug one terminal of the RC Cable into the device RC
connector, and plug the other terminal into TV, YELLOW for VIDEO,
RED for UDIO (RIGHT), WHITE for UDIO (LEFT).
o
~TV
TSC Converter Box
(2) RF Cable Connection
If the TV have only RF ntenna terminal, please screw 750hm F-Type
RF cable into V RF OUT terminal of the device, plug the other terminal
into TV set. (Please refer to your TV manual).
o
L
TSC Converter Box
Note: RF output is modulated with current channel audio.
- 06 -

TSC Converter Box
: Jlo.l ratJ
5.1. Front Panel
CD Power Button:
Press - On;
Press gain - Standby.
5-2. Rear Panel
(2) Power Indicator:
On means work normally,
Off means no power or standby.
(3) IR window:
Infrared receiving window.
CD NT RF IN: ntenna RF Input.
(2) Video: Video Output.
(3) udio L : udio Left Output.
@ udio R : udio Right Output.
@ V RF OUT: udiolVideo RF
Output.
(6) &Co-<tl: C dapterDC IN(+5V).
5-3. Remote Control
CD MUTE: Mute or restore sound.
(2) SCREEN: Select TV Mode: 4:3 or 16:9.
(3) .•••/~ : Decrease/Increase audio volume.
or move cursor in menu screen.
@ INFO: Display viewing channel information.
(5) NT LEVEL: Display ntenna RF signal
strength and quality.
<ID CH SC N: Start channel auto scanning.
(/) 0-9: Set the channels or number keys.
(8) UDIO: Select audio language.
@ <b POWER: Power ON/ OFF. Remote
Control
- 07 -

TSC Converter Box
@SLEEP: Switch the sleep timer setting.
j) OK: Use to confirm the channel selection and other operation.
@C/C: Switch Close Caption Service or On/Off.
o CH+/CH-: Select next / previous channel or move the highlight for
menu item.
9 V-CHIP MENU: Enter or exit the V-CHIP setting menu.
@ V-CHIP ON/OFF: V-CHIP on / off temporarily.
@L NGU GE: Select OSD language: English / Spanish / French.
5-4. Easy Setup for first use
Please check and follow below instructions to enjoy the digital TV program.
(j) Insert the batteries into remote control.
(2) Connect the antenna cable into the device.
(3) Connect the audio/video or RF output into your TV.
@ Connect the C adapter to DC IN Jack of the device, and then plug the
C adapter to the outlet.
(5) Press POWER to turn on the device, the Power LED will be lighten.
(6) Turn on your TV, and refer to the TV manual.
• If you use RC cable, please switch to V IN .
• If you use RF cable, please rescan the TV channels.
TSC Converter Box
drUP
~
NT RF IN
DC IN
0
_ VRFOUT
TV
- .08 -

TSC Converter Box
J) Press lOCHSC N" to scan TSC program channels.
T"
c
1
Press "OK" to start uto scan, It may take you several minutes.
Note:
• If you use F-Cable to connect the equipment and the TV, please set
" udio Mode" to 'Mono" mode.
If you change the RF Channel to CH3 or CH4, you need to rescan.
(Please refer to your TV manual.)
• While you use RC cable to connect to your TV. If your TV only have
one jack for audio in, you can set " udio Mode" to "Mono" mode.
Unless set " udio Mode" to "Stereo" mode .
• To Select the Time zone, use "CH+/CH-" to focus "Time Zone",
then use" <Ill / ~ "to select the zone where you are located: laska,
Haweii, Pacific, Mountain, Central, Eastern.
- 09 -