Laura Ashley ASHWELL User manual

1
ASHWELL Single Bed
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
Please check the pack contents before you begin. A full checklist of components is given in this leaflet. If
any components are missing, please contact the retailer from whom you bought this product.
-Do not stand or lean on this product.
-Make sure the area is clear when unpacking and positioning this product.
- This product is heavy; it should be assembled as near as possible to the point of use.
Take care when lifting to avoid personal injury and /or damage to the product.
-Keep small children/pets away from the assembly area. This product has small component parts that
are a choking hazard.
-Make sure you assemble this product correctly as per the instructions, and ensure all fittings are
tight.
-A minimum of two people is required to lift the bed into its position
-We recommend that the packaging is used to protect the surfaces during assembly.
Safety Advice and Assembly Recommendations

2
Fittings and parts checklist
A
Bolt M8X30 x 12
D
Allen Key x 1
B
Screw Ø 3.5 x25 x 6
C
Dowel D8X25 x 4
Step by step assembly instructions
A minimum of two persons is required to assemble this product.
Step One
-Attach one side rail to the headboard. Use bolts No. A. Allen key provided.
-
Step Two
-Attach the same side rail to the footboard, use bolts No. A

3
Step Three
- Repeat steps one and two with the other side rail.
Step Four
- Place 4 x wood dowels No. C into the pre-drilled position on the side rails.
- Place the slats between the said rails.
- Align the holes in slats with the holes in the rails. Secure with 6 screws No. B, tighten well.
Care and Maintenance: please refer to Laura Ashley Care
Guide.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE