Laura Ashley Provencale User manual

Laura Ashley
Provencale Tall Chest
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Please ensure instructions are read in full before commencing with this product.
Necessary Tools Screwdriver not supplied
Please check the pack contents before you begin. A full checklist of components is given in this leaflet. If any
components are missing, please contact the retailer from whom you bought this product.
- Do not stand or lean on this product.
- Make sure the area is clear when unpacking and positioning this product.
This product is heavy, it should be assembled as near as possible to the point of use.
Take care when lifting to avoid personal injury and or damage to the product.
- Keep small children/pets away from assembly area. This product has small component parts that are a
choking hazard.
- Make sure you assemble this product correctly as per the instructions and ensure all fittings are tight.
- A minimum of two persons is require to lift the rawer Chest into position
- We recommend that the packaging is used to protect the surfaces during assembly.
Safety Advice and Assembly Recommendations
1

Hardware and Wall Fixing Pack
AScrews Ø8 x 2”
x 8
BWasher x 1
CStrap x 1 Screws Ø8 x ¾”
x 1
Parts checklist
1. Tall Chest unit x 1 2. Plinth x 1
Wall fixing - if in doubt seek professional advice
To avoid any risk of tipping, this unit must be safely secured to the wall
(See Wall Mounting Instructions)
Wall Mounting Instructions
2
Wood
If fixing to wood make sure
that it isn’t chipboard as screws
can easily pull away from the
core structure
Brick or Masonry
Use an appropriate wall plug
provided you are sure your
wall is sound
Cavity wall
Special toggle wall plugs are
needed. Seek expert advice

1. Determine which side of the unit will have the easiest access, and secure the Wall Fixing Strap to one of
the pre drilled holes in the back panel (Fig 2) with the Screw ( ) and Washer (B)
(See illustration).
2. Place the unit in the desired position and move it approximately 5cm away from the side with the fixing strap.
3. Secure the loose end of the Wall Fixing Strap to the wall using a suitable fixing (NotSupplied) and move
the unit back into position, to hide the strap. Before drilling, check for any hidden water pipes or
electrical wires.
4. If for any reason you need to move your furniture, simply remove the wall fixing screw.
Fig1 Fig 2
Fig 1
Lay the unit on its back. We recommend that the packaging is used to protect the surfaces during this
process.
Place the plinth onto the bottom of the unit (Align the pre drilled holes on the plinth with the pilot holes on the
base panel) Secure the plinth using 8 Screws (A). Tighten with screw driver.
Fig 2
Carefully turn the assembled cabinet upright onto its feet.
A minimum of two persons will be required to do this.
Care and Maintenance. Please refer to Laura Ashley Care Guide
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
If you have any queries with this product please contact
Laura Ashley Customer Services. Tel: [phone]
www.lauraashley.com
3
D
1
2
A
C
B