Legamaster EASY VIEW HUD-HC-EPTZ-USB User manual

Product Content & Operation - Version 1.0
EASY VIEW Camera 4k ePTZ
Product Content & Operation
English

Product Content & Operation - Version 1.0 2
ATTENTION
This manual introduces functions, installation, and operation for this camera in detail. Please read
this manual carefully before installation and use.
1. Cautions
1.1 Avoid damage to the product caused by heavy pressure, strong vibrations or immersion during
transportation, storage, and installation.
1.2Do not expose the product to rain or moisture.
1.3To prevent the risk of electric shock, do not open the device. Installation and maintenance
should only be carried out by qualified technicians.
1.4Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
1.5Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild
detergent if needed. Do not use strong or corrosive detergents to avoid scratching the lens and
affecting the image quality.
1.6This product contains no parts which can be maintained by users themselves. Any damage
caused by dismantling the product by user without permission is not covered by its warranty.
2. Electrical Safety
Installation and use of this product must strictly comply with local electrical safety standards.
3. Install
3.1 Do not rotate the camera head violently, otherwise it may cause internal mechanical failure.
3.2 This product should be placed on a stable desktop or other horizontal surface. Do not install the
product obliquely, otherwise it may display inclined image.
3.3 Ensure there are no obstacles within rotation range of the holder.
3.4 Do not power on before completing installation.
4. Magnetic Interference
Electromagnetic fields at specific frequencies may affect the video image. This product is Class A. It
may cause radio interference in household application. Appropriate measure is required.

Product Content & Operation - Version 1.0 3
TABLE OF CONTENTS
01 CAMERA DETAILS 4
1.1 INCLUDED ACCESORIES 4
02 REMOTE CONTROL 4
03 OPERATING THE CAMERA 5
3.1 CAMERA CONNECTION 5
3.2 APLICATION 5
3.3 MENU INTRODUCTION 7
3.3.1 MAIN MENU 7
04 MAINTENANCE & TROUBLESHOOTING 11
4.1 CAMERA MAINTENANCE 11
4.2 TROUBLESHOOTING 11

Product Content & Operation - Version 1.0 4
1. CAMERA DETAILS
1.Camera Lens
4.Tripod fixing hole
7.USB-B 3.0 Connector
2.Indicator light
5.Positioning hole
3.Built-in MIC
6.Bracket
ITEMS
IR Remote Control
USB 3.0 Cable
User Manual
2. REMOTE CONTROL
1.1 INCLUDED ACCESORIES.
1. Infrared indicator light
2. Stand By
The device enters standby mode after pressing it once and wakes up after pressing it again.
3. Menu Button
Enter/exit the OSD menu or return to the previous menu.
4. Pan/Tilt Control
Up: press Down: press
Left: press Right: press
Press and hold the up/down/left/right key, the pan/tilt movements will keep running.
【OK】：Camera lens back to the middle position; Enter next menu
5. Number key
Number keys 1, 2, 3:to preset positions settings.
Note: Short press for 1s [preset position recall]; long press for 3s [preset position setting]
Long press for 5s [preset delete]
6. Zoom Control
【 】: press【 】key to zoom in
【 】 : press 【 】key to zoom out
7. Auto Framing Function Key

Product Content & Operation - Version 1.0 5
3. OPERATING THE CAMERA
3.1 CAMERA CONNECTION
3.2 APLICATION
1. In this manual, “press the key” refers to a click rather than a long-press, and a special note will
be given if a long-press for more than one second is required.
2. When a key-combination is required, do it in sequence. For example, “【*】+【#】+【F1】”
means press“【*】”first and then press“【#】” and last press“【F1】”.
1）Infrared indicator light
1. Flashing (red): Sending instructions
2. No flashing: do not send instructions
2）Standby, Menu Setting
1. Standby button : turn on or turn off
the camera image
2. Menu key : call up the camera OSD
menu

Product Content & Operation - Version 1.0 6
3) Pan/Tilt Control
Rotate up: press【 】key rotate down: press【 】
Rotate to the left: press the【 】key
Rotate to the right: press the【 】key
Middle position: press【OK】key
Long press the up, down, left, and right rotation
buttons, it will continue to rotate from slow to fast
until the end of the stroke; release it halfway to stop
the rotation.
4）Preset position setting, calling, deleting
1. Save the preset position: Long press (within 3s-
5s) one of the keys 1 to 3, and a preset a position
corresponding to the number key will be saved.
2. Call the preset position: directly press the
number keys 1 to 3 to call the saved preset
position.
3. Delete preset position: Long press (5s) one key 1
to 3 to delete a saved preset position
corresponding to the number key.
Note: If the number key is not preset, it is invalid.
5）Zoom Control
1. Zoom in: press the 【 】key
2. Zoom out: press 【 】key
3. If you long press these two buttons, it will
continue to zoom in/out; release it halfway to
stop zooming.
6) Auto Framing Function On/Off
Turn on/off Auto Framing Function

Product Content & Operation - Version 1.0 7
Press 【MENU】key under MJPG, YUY2, NV12 or H264 compression encoding format output to
display the menu, using scroll arrow to point at or highlight the selected items.
3.3 MENU INTRODUCTION
3.3.1 MAIN MENU
Language
Language Setting press the【← →】keys to select a Language
System Setting
Move the pointer to (Setup) in the Main Menu, click the【HOME】key and enter the (System
Setting) as shown below:
Image Style: default / standard / clear / bright /
soft can be set.
Intelligent zoom: on / off
LDC: On/OFF

Product Content & Operation - Version 1.0 8
Exposure Setting
Move the pointer to EXPOSURE in the Main Menu, click the【HOME】and enter the (EXPOSURE SET)
as follows:
Mode: Auto, Manual, Shutter priority and Brightness priority.
EV: On/Off (only available in auto mode)
Compensation Level: -7~7 (only available in auto mode when EV is ON)
BLC: ON/OFF for options (only available in auto mode)
Anti-Flicker: OFF/50Hz/60Hz for options (only available in Auto/Iris priority/Brightness priority modes)
Gain limit: 0~15(only available in Auto/ Iris priority /Brightness priority mode)
WDR: Off, 1~8
Shutter Priority:
1/30,1/50,1/60,1/90,1/100,1/120,1/180,1/250,1/350,1/500,1/1000,1/2000,1/3000,1/4000,1/6000,
1/10000 (only available in Manual and Shutter priority mode)
Brightness: 0~23 (only available in Brightness priority mode)
Gain: 0 to 15 (only valid in manual, shutter priority mode)

Product Content & Operation - Version 1.0 9
Color
Move the pointer to the (COLOR) in the Main Menu, click the【HOME】and enter the (COLOR sub
menu) as follow:
WB Mode: Auto, Manual, One Push, Specified color temperature
Saturation: 0-50
AWB Sensitivity: high/middle/low (only available in automatic mode)
Chroma: 0~8
RG Tuning: -10 - 10
BG Tuning: -10 - 10
Red Gain: 0-255
Blue Gain: 0-255
Color Temperature: 2400K~7100K
Brightness: 0~14
Contrast: 0~14
Sharpness: 0~15
Flip-H: On/Off
Flip-V: On/Off
B&W Mode: color, black/white
Gamma: Default/0.34/0.39/0.47/0.5
Minimum Illumination: On/Off
Image
Move the pointer to the (IMAGE) in the Menu, click the【HOME】and enter the (IMAGE sub menu) as
follow:

Product Content & Operation - Version 1.0 10
Noise Reduction
Move the pointer to the (NOISE REDUCTION) in the Menu, click the【HOME】and enter the (NOISE
REDUCTION) as follow:
Version
Move the pointer to the (VERSION) in the Main Menu, click the【HOME】and enter the (VERSION) as
follow:
2D Noise Reduction: Auto, close, 1~7
3D Noise Reduction: Close, 1~8
Restore Default
Move the pointer to the (RESTORE DEFAULT) in the Main Menu, click the【HOME】and enter the
(RESTORE DEFAULT) as follow:
Restore default: YES/NO. Color style and video format cannot be restored to factory default
Note: If the address of former remoter is
not 1 but another one from 2, 3, 4, the
corresponding camera address will restore
to 1 when all parameters or system
parameters are restored. User should
change the remoter address to be 1 (press
No.1 according to the camera so to get
normal operation)