LEGRAND MyHome F524 User manual

www.legrand.com
Installation manual
F524
Energy Data Logger
003566

Energy Data Logger
Installation manual
3

Contents
3
Energy Data Logger
Installation manual
1 Description 4
1.1 Warnings and recommendations 4
1.2 Main functions 4
1.3 Legend 5
2 Connection 6
2.1 Wiring diagrams 6
3 Configuration 7
3.1 Procedure with Windows Vista, 7 or 8 operating system 7
3.2 Procedure for Tablet and Smartphone 13
3.3 Troubleshooting 13
4 Appendix 14
4.1 Technical data 14

5
4
Energy Data Logger
Installation manual
1.1 Warnings and recommendations
Before proceeding with the installation we recommend that you read the content of this manual
very carefully.
The warranty will automatically become void in case of negligence, improper use, and tampering
by unauthorised personnel.
1 Description
1.2 Main functions
The SCS device saves the consumption values in separate energy lines. These lines can be both
electric, by connecting Bus meters with 3 inputs for toroids, item F520, or a load management
central unit, item F521, and non-electric, by connecting pulse counter interfaces, item 3522. The
total number of lines managed cannot exceed 10.
It also allows to check the system loads, displaying the instantaneous consumptions and (when
they are deactivated by a load control unit following an overload), force their reactivation for a
given time.

5
Energy Data Logger
Installation manual
4
2
1
2
3
1 - User interface LED: see table
2 - MicroSD memory card slot (optional)
3 - Connection to the SCS BUS
4 - Ethernet connection
5 - Reset key:
– press and hold for 10 seconds to restart the Energy Data Logger;
– press and hold for 20 seconds to restart the Energy Data Logger , and set the dynamic
selection of the IP address.
1.3 Legend
User interface LEDs table
Red LED
flashing slowly and regularly:
no network found;
waiting for an address to be assigned.
Green LED
flashing slowly and regularly: device waiting to be configured.
Green LED
flashing quickly and regularly: time on the device not configured.
Green LED
flashing slowly and irregularly: device working and configured.
Red-green LED
flashing quickly:
IP or microSD configuration error.
Reset, check the configuration, and the microSD
memory card model.
1
5
5
3

Check that your PC is set for automatic acquisition of the IP address (network parameters);
then select the Energy Data Logger device among the network resources.
7
6
Energy Data Logger
Installation manual
2 Connection
BUS
Diagram with direct or crossover cable
2.1 Wiring diagrams
To put the device into operation, this must be connected following the diagrams below.
Diagram with switch
BUS
Switch / router

7
Energy Data Logger
Installation manual
3.1 Procedure with Windows Vista, 7 or 8 operating system
If the connection is correct, it will be possible to display the device in the My Network Places
window, with the name “Energy Data Logger”.
3 Configuration
The Web pages can be accessed with two authority levels: “user" and as “administrator”.
In addition to having access to the same pages as the user, the administrator can also
access the “Configuration” function and define some Data Logger parameters. Ask your
installer for the access passwords, if this has not already been provided.
To learn how to navigate through the web pages refer to the user manual.
Double click on the icon to open the configuration WEB page.

9
8
Energy Data Logger
Installation manual
If the device is not automatically recognised by the PC, follow the instructions below. To access
the configuration page, and display the device IP address, the following parameters must be set:
From the
Start / Control panel menu
1 - Click "Windows Firewall".
1
2 - Click “Allow a program or
feature through Windows
Firewall”.
2
3 - Enable both Public
and Private “Network
Discovery”.
3 3
3 Configuration

9
Energy Data Logger
Installation manual
From the
Start / Control panel menu
4 - Click “Network and Sharing
Center”
5 - Click "Change advanced
sharing settings"
5
6
6 - Turn on “Network
discovery”
4

11
10
Energy Data Logger
Installation manual
From the
Start / Control panel menu
7 - Click “Administrative Tools”
7
8 - Click “Services”.
8
3 Configuration

11
Energy Data Logger
Installation manual
9 - Set Automatic Startup Type for item "UPnP Device Host" and ensure that it has actually been
enabled.
9
10 - Click “Start”.
11 - Click.
10
11

13
12
Energy Data Logger
Installation manual
12 - Set Automatic Startup Type for item “SSDP Discovery” and ensure that it has actually been
enabled.
12
13 - Click “Start”.
14 - Click.
13
14
3 Configuration

13
Energy Data Logger
Installation manual
3.2 Procedure for Tablet and Smartphone
If viewing the pages using a Tablet or a Smartphone, it is recommend to set fixed IP and IP mask;
in alternative, use an application for the identification of UPnP devices.
3.3 Troubleshooting
Problem Solution
When directly connected to the
PC, the device cannot be displayed
among the system resources.
Power the device by pressing and holding down the reset
key until the red LED starts flashing: initialisation of the
device will start, and the following parameters will be set:
IP address: 192.168.1.5
IP Mask: 255.255.255.0
It will now be possible to connect to the device and
reconfigure the parameters.
The device web pages are not
correctly displayed
1. In the browser parameters enable "Compatibility
mode";
2. Delete the browser history, including, including
"Temporary files/cache”.
Internet Explorer 7 (on Windows XP) and 9 (on windows 7)
Google Chrome 19.0.1084.56
Safari 5.1.7
Mozilla Firefox 12
Opera 11.64
Note: the device has been tested with the following browser versions:

15
14
Energy Data Logger
Installation manual
4 Appendix
Power supply from BUS 18 – 27 Vdc
Assorbimento 30 mA (max)
Operating temperature 5 – 45 °C
4.1 Technical data
TECHNICAL AFTER-SALES SERVICE
Legrand SNC only accepts responsibility for perfect device operation if it is installed to the
state of the art respecting the indications of the product installation manual.
www.legrand.com

15

BTicino SpA
Via Messina, 38
20154 Milano - Italy
www.bticino.com
Legrand SNC
128, av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex - France
www.legrand.com
Legrand SNC reserves at any time the right to modify the contents of this booklet and to communicate in any
form and modality, the changes brought to the same.