LEGRAND SANUS WSSE3A1 User manual

WSSE3 A1 / WSSE3A2
Height-Adjustable
Speaker Stand
For SONOS®Era 300™
INSTRUCTION MANUAL
Texto en español, página 12 Deutscher Text Seiten 16 Svensk text sida 20 中文文字说明请参见第 24 页
Texte français page 14 Nederlandse tekst op pagina 18 Русский текст: стр. 22 日本語は 26 ページ
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
US: [phone] • EMEA: [phone] • UK: [phone]
We’re ready to help!

2
CAUTION: Avoid potential personal injuries and property damage!
•Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•Please read through these instructions completely to be sure you’re comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at US: [phone] • EMEA: [phone] • UK: [phone].
Before getting started, let’s make sure this product is perfect for you!
10 lbs.
(4.5 kg)
Speaker
Weight Limit
DO NOT
EXCEED
Tool Needed
Screwdriver
This stand is designed to support only Sonos® Era 300™ speakers.
IMPORTANT SAFETY INSTRUCTIONS
—PLEASE READ ENTIRE MANUAL PRIOR TO USE —SAVE THESE INSTRUCTIONS

3
Dimensions































4
Parts and Hardware
NOTE: Not all hardware included will be used.
Quantities shown are for one speaker stand.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service. Never use damaged parts!
  


STEP 2 STEP 3 STEPS 4 and 5
STEP 6 STEP 7
OPTIONAL
Base
Lock
Washer
Pillar Screw
Carpet Spike
Jam Nut
Rubber Pad
Clip
Trigger
Pillar
x1
01 x2
04
x1
02
x2
03
x4
05
x4
06 x4
07
x1
08
x1
10 x4 11
Bracket
Speaker Screw
x3
09

Route Cable(s) STEP 1
5
Attach Base to Pillar STEP 2
02 01
02

03

04
2 X
2 X

6
Optional Carpet Spikes
Rubber Pads
Install Rubber Pads -or- Carpet Spikes STEP 3
Twist rubber pads 05 into the base 02 .
WARNING: The
ends of carpet spikes
06 are sharp and
may scratch flooring,
damage wiring, or be
hazardous to children.
02
02
05
OR
07 06
===
HEIGHT ADJUST
07
06

7
Attach Bracket to Pillar STEP 4
08
01
M5 x 12mm
09
CAUTION:
Do not overtighten.

8
Install Speaker STEP 5
M5 x 12mm
09
2 X

9
CAUTION: Avoid potential personal
injuries and property damage!
Hold upper post 01 BEFORE pressing
trigger button 10 .
Trigger button 10 is removable to
prevent accidental lowering, or to route
cables into post 01 (STEP 7).
10
10
01
01
RAISE LOWER
HOLD
1 2 PRESS 3LOWER
Height Adjustment STEP 6

11
11
4X
10
Secure Cable(s) STEP 7
10