LEGRAND Sanus Accents ASBWM1 User manual

Our US-based install experts
are standing by to help.
Call us at:
[phone]
WE’RE HERE TO HELP
Or, chat at:
SANUS.com/chatSA
Texto en español, página 16
SoundBar Wall Mount
Model ASBWM 1
INSTRUCTION MANUAL

20 lbs.
(9.07 kg)
2
DO NOT EXCEED
20 lbs. (9.07 kg) for this shelf.
IMPORTANT SAFETY INSTRUCTIONS
READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS
Weight Restrictions
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this
product, contact Customer Service (see back page).
CAUTION: Avoid potential personal injuries and property damage!
►Use this mounting system only for its intended use as described in these instructions.
►Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

3
Tools Needed
1/8 in.
(3.2 mm)
Wood
Drill Bit Hammer Drill Bit
3/8 in.
(10 mm)
Wood Stud Install Drywall Install
Pencil LevelPhillips
Screwdriver
Tape
Measure Electric Drill

4
M4 x 16mm
M5 x 16mm
M4 x 10mm
M6 x 16mm
#8 x 2 in.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Supplied Parts and Hardware
Anchor
Lag Screw
Soundbar
Bracket
Soundbar Screws Soundbar
Washers
qty. 2 each
qty. 2
qty. 4
qty. 4
qty. 2 each
4
1
2
3
5
M4
M5
M6
M4 / M5
Washer
M6
Washer
For Drywall
installations
ONLY
DO NOT use in
concrete
or wood
NOTE: Not all hardware included in this kit will be used.

5
Determine Your Install method
With threaded inserts
1: Bottom Mounted 2: Shelf-style
(no threaded inserts)
1
1
5
4

6
H H H
STEP 1 Determine your bracket location
HEIGHT H
1 1
1
STEP 1.1

7
W
W
W(51−127 mm)
2−5 in.
2−5 in.
(51−127 mm)
Determine your bracket location
WIDTH W
Bottom Mounted
Shelf-style
11
1 1
STEP 1.2

8
STEP 2 Install Soundbar Brackets
Determine Your Wall Type
STEP 2.1
1
1
For
DRYWALL
Only, or
UNSURE,
Skip to
STEP 2.2B,
on PAGE 10
For
WOOD STUD
MUST BE
CENTERED
on Bracket,
proceed to
STEP 2.2A

9
1/8 in.
(3.2 mm)
2 in. (51 mm)
Bit
Drill Hole Secure Bracket
STEP 2.2aSTEP 2.3a
Go to STEP 3 on PAGE 12
2
1

Drill Test Holes Drill Hole(s)
STEP 2.2BSTEP 2.3B
3/8 in.
(10 mm)
Bit
1 in. (25 mm)
1/8 in. (3.2 mm) Bit
Drill test holes using a 1/8 in. (3.2 mm) bit.
If you hit DRYWALL ONLY,
proceed to STEP 2.3B
If you hit a WOOD STUD,
Skip to STEP 2.5B
2 in.
(51 mm)
10