LEGRAND SANUS WSSAFM1-B2 User manual

WSSAFM1-B2
SOUNDBAR MOUNT DESIGNED
FOR Sonos*Ray™
INSTRUCTION MANUAL
WE’RE HERE TO HELP
If you have any questions along the way, just give us a call or visit SANUS.com
US: [phone] • UK: [phone] • EMEA: [phone]
Texto en español, página 22 Deutscher Text Seiten 30 Svensk text sida 38
中文文字说明请参见第 54 页 Texte français page 26 Nederlandse tekst op pagina 34
Русский текст: стр. 46 日本語は 50 ページ
Testo italiano pagina 42

2
•Your TV, soundbar, soundbar mount, and any accessories you plan to install
DO NOT EXCEED the specified weight limit of your TV or TV wall mount.
•Refer to the documentation that came with your soundbar, your TV and
your TV wall mount for additional guidance.
•You CANNOT use this product if your TV mount’s interface bracket:
includes built-in/integrated spacers (Figure 1), or the mounting holes/
slots are greater than 11mm [.43 in.] (Figure 2).
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Figure 2
Figure 1
Before getting started, let’s make sure this mount is perfect for you!

3
TV
Soundbar
Figure 3
WARNING:
•This soundbar mount is only designed for use with TV wall mounts that meet third party safety
certifications (UL Certified).
•This soundbar mount is ONLY designed to mount below the television (Figure 3).
•This soundbar mount is designed to be installed and utilized only as specified in this manual.
The manufacturer is not responsible for improper assembly, use, or handling of this product.
•For wall mounted TVs: Your wall must be capable of supporting five times the weight of your TV,
TV mount, and soundbar combined.
•Failure to follow these instructions could result in an unstable situation that may result in
property damage or personal injury.
If you have any questions,
please contact customer service.
US: [phone]
UK: [phone]
EMEA: [phone]

4
Weight Limit
for WSSAFM1-B2
TOTAL Weight Limit for Your TV Mount/Stand
DO NOT EXCEED
5 lbs. (2.27 kg)
for this Soundbar Mount.
5 lbs.
(2.27 kg)
CAUTION: Avoid potential personal injuries and property damage!
The weight of your TV/ this soundbar mount/your soundbar/any accessories, MUST BE LOWER than the
maximum weight rating of your TV mount.
See your TV mount's manual for maximum weight allowed.
(plus) (plus) (equals)
Soundbar
Mount ANY Other
Accessories
Sonos*Ray™
Soundbar Your TV
Total Maximum
weight for Your TV
Mount/Stand
Weight Restrictions
(plus)
(2 lbs.)
(0.9 kg) __ lbs.
(__ kg)
__ lbs.
(__ kg)
__ lbs.
(__ kg)
MAX
TOTAL
WEIGHT

5
Phillips Screwdriver
Level
3rd Party Certified
TV stand or Wall Mount**
**The TV mount styles illustrated will vary, though
the install procedures are the same.
Tools Needed
3/16 in.
Hex Key
H1
INCLUDED

6
Parts and Hardware for STEP 1
Soundbar
Bracket
Mount Spacer
qty. 2
qty. 2
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting
assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
01
05
M4 x 16mm
M5 x 16mm
M4 x 10mm
M5 x 10mm
1/4-20 x 9.53 mm (3/8”)
M6 x 16mm
M5 Washer
Spacer
qty. 2
#10
M5x10mm qty. 2
03
04
M5 x 10mm
Soundbar Screw
qty. 2
02
Part for STEP 3
M5

7
Parts and Hardware for STEP 3
M4 x 16mm
M6 x 16mm
M8 x 20mm
M4 x 40mm
M6 x 40mm
M8 x 40mm
M8 x 55mm
22mm
TV Spacer
2.5mm
5mm
M4 / M5
Washer
M6 / M8
Washer
qty. 4
qty. 4 each
qty. 4
TV Interface Screws
M4
M6
M8
Washers Spacers
06
07 08
M4 x 16mm
M6 x 16mm
M8 x 20mm
M4 x 40mm
M6 x 40mm
M8 x 40mm
M8 x 55mm
22mm
TV Spacer
2.5mm
5mm
M4 x 16mm
M6 x 16mm
M8 x 20mm
M4 x 40mm
M6 x 40mm
M8 x 40mm
M8 x 55mm
22mm
TV Spacer
2.5mm
5mm

8
STEP 1
Install Brackets on Sonos*Ray™
Bottom of Sonos*Ray™
01
02
03
04
04
03
02
01

9
Prep Your TV (if mounted on a wall or stand)
STEP 2.1
STEP 2
Position Sonos*Ray™Soundbar
CAUTION: Follow your TV mount’s manual for instructions on how to safely
remove your TV and TV bracket.

10
Adjust Soundbar Mount to Match Your TV (VESA) Hole Pattern
STEP 2.2
TV Hole
Pattern

11

12
NOTE: Position the soundbar brackets 01 as vertically as possible.
01
01

13
STEP 3
Install Sonos*Ray™Soundbar Mount to Your TV
M4
TV Screw Diameter
3.1
Only one screw size 06 fits your TV.
M6
M8
CAUTION: Verify adequate thread engagement with
your screw 06 , washer 07 , spacer 08 combination AND TV/
sound bar brackets.
Too short will
not hold your TV.
Too long will
damage your TV.
NOTE: If
your TV included
inset spacers or
adapters, use them
UNDER the mount
hardware.

14
SPACER NEEDED
b
NO SPACER
a
TV Screw Length
3.2
Flat Back TV
[TV brackets lay flat on your TV]
Flat Back TV
with Extra Space Needed
[for deep inset holes or cable interference]
Rounded or Irregular Back TV
[TV brackets NOT resting flat on your TV]
GO TO PAGE 15 GO TO PAGE 16 GO TO PAGE 16

15
Side View
05
06
07
01
05
06
07
01
NO SPACER
a
Assemble (No Spacer)
3.3a

16
Side View
05
08
08
06
07
01
SPACER NEEDED
b
06
07
05
01
08
Spacers 08
are stackable
Assemble (Spacer Needed)
3.3b

17
STEP 4
Adjust Soundbar Bracket
STEP 4
Adjust Soundbar Bracket
NOTE: You may need to
reposition the hole locations in
soundbar brackets 01 to adjust your
soundbar to the desired position.
01 01

18
IMPORTANT!
Do not over-tighten the screws —this will
deform the washers.
STEP 5
Tighten Connections

19
STEP 6
Hang Up the TV / Sonos*Ray™Assembly
Follow your TV wall mount installation
manual to hang your TV assembly.

20
Adjustments
H1
2
H1
1
T
01
TIP: Use tilt knobs Tto get soundbar
mount to desired location, then use
included hex key H1 to tighten.