Leica DSX User manual

Leica DSX
Quick Guide
Version 2.0
English

1 Important Information about your Instrument
Read and follow the User Manual before using the product or the accessories
delivered with the product.
Keep for future reference!
•Data communication with external appliances
•Carrying out measurement tasks using various GNSS measuring techniques
•Validating user-input utilities based on the processed data
•Detecting and mapping underground utilities - metallic and non‑metallic
•Generating project documentation and 3D map of underground utilities
The product must not be disposed with household waste.
☞
Intended use
2 Important Information about your Instrument

2 DSX Components
0019568_001
g
f
j
h
i
k
a
b
d
e
c
a Cradle for CT1000 tablet
b Extendable handle
c Handle extension knobs
d Upper cam levers for foldable
handle
e Wheel lock for cart brake
f Power button for the DSX
g Front alignment marker on
the carrying handle
h Battery compartment
i Encoders – placed inside the
rear wheels
j Bottom cam levers for the
foldable handle
k Side alignment markers on
the bottom chassis
DSX
3 DSX Components

3 Technical Data
Temperature
Operating temperature [°C] Storage temperature [°C]
−10 to +40 −40 to +70
GEB242:
−10 to +55 −40 to +70
Protection against water, dust and sand
Protection
IP65 (IEC 60529)
Humidity
Protection
Max 95% non-condensing
The effects of condensation are to be effectively counteracted by periodically
drying out the instrument.
Environmental
specications
4 Technical Data

4 Care and Transport
Never carry the product loose in a road vehicle, as it can be affected by shock
and vibration. Always carry the product in its container and secure it.
For products for which no container is available use the original packaging or its
equivalent.
When transporting the product by rail, air or sea, always use the complete original
Leica Geosystems packaging, container and cardboard box, or its equivalent, to
protect against shock and vibration.
Transport in a road
vehicle
Shipping
5 Care and Transport

5 Operation
5.1 Unfolding and Adjusting the Handle
0019569_001
1 2 3 4
1. Release inner cam levers and unfold upper handle legs .
2. Lock inner cam levers until the visual markers are aligned.
3. Release outer cam levers and raise entire handle assembly until the
visual markers are aligned.
4. Loosen the knobs to extend the upper handles, and then tighten
them.
Unfold and adjust
the handle
6 Operation

5.2 Attaching and Connecting the Laptop or Tablet
☞The support is designed to hold a CT1000 tablet.
0019586_001
☞The support includes the tablet cradle to hold the tablet, two RAM
balls (one attached to the cart handles and the other to the cradle).
Also it includes a double socket arm which holds together the RAM
balls.
Attach and con-
nect the tablet
7 Operation

0019587_001
1. Mount the two RAM balls to attach the tablet to the handle:
•One to the handle top
•The other to the tablet cradle
2. Use the double socket arm to hold the two RAM balls:
Adjust the tablet cradle until optimal inclination and then tighten the
screw on the double socket arm.
8 Operation

3.
xxxxxx_001
xxxxxx 0
01
0019637_001
Plug in the DSX LAN cable to the
tablet.
9 Operation

5.3 Inserting the Battery
0019570_002
123
1. To open the battery compartment, loosen the screw on the battery
compartment.
2. Insert the battery facing downwards. The rough surface of the battery
points towards the up-down direction.
3. Close the battery compartment and tighten the screw.
Insert the battery
10 Operation

5.4 Switching the DSX ON/OFF
xxxxxx_001xxxxxx
_
0010019637_001
1. Press the ON/OFF key on the DSX.
Switch the DSX
device ON/OFF
11 Operation

6 EU Declaration of Conformity
The equipment conforms to the following requirements set by EC regulations,
including subsequent modications, and to the legislation set by the member
states that implement these regulations:
2014/53/EU Radio Directive
Warning: this equipment is destined for use in industrial environments (Class A
apparatus). In residential, commercial and light industry environments, this
apparatus may generate radio interference: in this case, the user may be
required to operate while taking appropriate countermeasures.
The apparatus is sensitive to the presence of external electromagnetic elds,
which may reduce its performance.
Receiver test according to EN 302 066 v. 2.1.0
Conformity to
European regula-
tions
12 EU Declaration of Conformity

The unit has been tested according to the provision of the EN 302 066 v.
2.1.0. Specically, for the receiver test (that tests the inuence of an interferer
signal to the device), the following performance criterion has been used (see
ETSI TS 103 361 v.1.1.1) .
Performance criterion: The difference D between the Rx signal noise (increased
by an interferer) and the maximum input signal for the Rx in the linear region
of operation.
Level of performance: Dmin > 30 dB
We, Leica Geosystems AG, CH-9435 Heerbrugg, declare under our sole
responsibility that the product Leica DSX – Ground Penetrating Radar
following the provisions of Directive(s)
•2014/53/EU Radio equipment (RED) (in accordance with annex III)
•2011/65/EU Restriction of hazardous substances (RoHS)
to which this declaration relates, is in compliance with the following standards:
EU Declaration of
Conformity
This corresponds
to EN ISO/
IEC 17050‑1
13 EU Declaration of Conformity

•EN 61010-1:2010
•EN 62479:2010
•EN 301 489-1 V2.2.0: 2017
•EN 301 489-33 V2.2.1: 2019
•EN 302 066 V2.1.1: 2017
•Draft EN 302 066 V2.2.0: 2019
For translations into the ofcial EU languages please refer to:
http://www.leica-geosystems.com/ce
☞
14 EU Declaration of Conformity

900634-2.0.0en
Original text (900634-2.0.0en)
Printed in Switzerland, © 2021 Leica Geosystems AG
Leica Geosystems AG
Heinrich-Wild-Strasse
9435 Heerbrugg
Switzerland
www.leica-geosystems.com