Leicke EP18103 User manual

User's Manual
Bluetooth Speaker with radio and MP3 player
Product number: EP18103

PACKAGE CONTENTS
Before attempting to use this device, please check the packaging and make sure
the following items are contained in the package:
Number
of Pieces
Name Note
1 Bluetooth speaker integrated battery
1 charging cable micro USB
1 AUX cable .5 mm // .5 mm
1 user's manual -
TECHNICAL DETAILS
Bluetooth version 2.1, up to 10 m range
Capacity of integrated battery 800 mAh
Power supply 5V / 1A
Maximum output 5 Watt, 0.5%THD @ 1kHz
AUX input resistance 20kΩ
Maximum playtime 6-8h, depending on volume and genre
Supported audio formats MP
Supported memory cards TF / MicroSD up to 2 Gbyte
Power supply USB 5V / 1A
Size (LxWxH) 67 x 67 x 70 mm
Weight 180 g
GETTING STARTED
Step 1: To switch the device on, just move the slide switch to the "ON" position.
Step : After switching on, the device will be in Bluetooth mode (signal tone
sequence). To activate pairing, short press Play/Pause button. Now pair it with your

smartphone or tablet. If a memory card is inserted, the speaker automatically
switches to MP player mode. To activate radio mode, press Play/Pause for about
seconds.
Step 3: Volume is controlled by long pressing the forward (up) or backward (down)
button for more than 2 seconds.
Step 4: Short press the forward and backward button to switch songs or radio
channels depending on the mode the device is in. Station scanning will be activated
by short pressing Play/Pause while in radio mode and can be interrupted by
pressing a single button.
Step 5: Incoming phone calls can be taken by short pressing the multifunctional
button (MFB). The calls can also be ended by pressing the MFB. The integrated
microphone enables the speaker for hands-free calls.
Step 6: Switch the device off by using the slide switch at the side of the device.
Note: Before attempting to use the device for the first time, please charge the
battery for at least two hours. Thereby the maximum life span will be ensured.
ESTABLISHING THE BLUETOOTH CONNECTION
Step 1: Switch the music box on. To use the Bluetooth function, NO memory card
must be used.
Step : Open the settings menu of your device and look for the Bluetooth option.
This must be activated. In the list of the found devices you will now find "LEICKE
EP1810 ". Connect. If a code is to be entered, please enter "0000".
Step 3: Now the speaker is ready for use. Pairing will be saved and available when
switching on the device the next time.

MP3 PLAYER
The MP function is activated by inserting a memory card. To switch between
songs short press the forward or backward buttons. Adjust volume by long pressing
the forward and backward buttons. Please keep in mind that Bluetooth is not
available while a memory card is inserted.
RADIO
Before using the radio function, connect the charging cable to the speaker. The
speaker must be switched off and the other end of the cable must not be
connected to anything! It will work as antenna. Activate radio function by pressing
Play/Pause until you hear a signal. Station scanning will be activated by short
pressing Play/Pause while in radio mode. The scan is finished when the channels
stop changing automatically. To change the channel short press forward or
backward. Adjust volume by long pressing the forward and backward buttons.
To switch back to Bluetooth mode keep Play/Pause button pressed.
HANDS-FREE FUNCTION
Receive and finish incoming calls by short pressing the MFB. The integrated
microphone will be activated automatically.
CHARGING THE INTEGRATED BATTERY
When the battery is low (about 10 minutes run time left) the speaker alerts
acoustically. In this case, charge the speaker as soon as possible. Use a 5V 1A
USB power supply to charge. Higher voltage may damage speaker and power
supply. The red indicator light will stay on when the speaker is charging. Once it
has finished charging, the indicator light will go out.

CONTROL ELEMENTS

TROUBLE SHOOTING
First check if the speaker is charged and switched on.
Problem Possible Cause/Possible Solution
Playing via Bluetooth not
possible
• Is pairing with your device successfully completed?
• Try to connect again by switching off and on again.
• Check if speaker is in radio mode.
• Check if speaker is in range of your device.
• Is volume high enough?
No playback from Micro
SD / TF card
• Are there music files saved on the card?
• Try going to the next song by short pressing the
forward button.
• Is the memory card intact?
No playback from radio • Is the reception disturbed? Try switching the channel
with backward or forward.
Our customer support will be glad to help you at [email protected].

SAFETY NOTES
For your own safety and for long enjoyment of our product, please follow the
following safety instructions:
Please use device as described in the manual.
To protect your hearing and widen the life span of the speaker, maximum
volume should not be adjusted over a longer period of time.
Use 5V /1 A power supplies only. The connection of power supplies with
higher voltage leads to irreparable damage.
Please keep power adapter and speaker dry and use in dry environment
only. Do not touch with wet hands.
Keep away from damp, high temperature, dusty, erosive and oxidative
environment.
Keep safe from being hit or falling down.
Turn off power when device is not in use for a longer time.
Do not open cover and do not touch inner parts.

FCC INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures: -
Reorient or relocate the receiving antenna. - Increase the separation between the
equipment and receiver. - Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. - Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
IMPORTANT NOTE:
Radiation Exposure Statement:
1. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users should follow the specific instructions in
the user's manual to comply with the FCC rules.
2. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

DISPOSAL
This de ice contains materials that must not be disposed of as household
waste. Please check local laws concerning the applicable disposal regulations.
Protect the en ironment by participating in recycling programs.
DECLARATI N F C NF RMITY
LEICKE GmbH herewith declares that the de ice complies with the RED 2014/53/EU
und ROHS 2011/65/EG regulations. The declaration of conformity can be found at
www.leicke.com. Go to the product you bought and look at downloads.
CONTACT
If you have any questions, please feel free to contact us.
PRODUCTION & WHOLESALE
LEICKE GmbH
Dohnanyistr. 28
0410 Leipzig
Germany
Web: www.leicke.com
Mail: [email protected]